随着冷变形度的增加,材料的抗腐蚀能力降低。
With the increase of cold work of pipeline steels, consequently, the corrosion resistance for pipeline steels will decrease.
冷变形量及时效温度是影响交互作用的主要因素。
The degree of cold rolling and aging temperature are the major factors that influence the interaction.
冷变形后经直接时效处理,合金的强度最高、塑性明显下降;
When the cold deformation of alloy GH169 was directly aged, the strength of alloy is on the highest level, the ductility decreases apparently.
时效前的冷变形可以加速时效析出过程,在时效的初期尤为明显。
The process of precipitation can be accelerated as the cold deformation before aging.
研究了冷变形与热处理工艺对GH169合金组织和性能的影响。
The effects of cold deformation and heat treatment on the properties and microstructure of alloy GH169 are studied.
增加强化材料能够增加TFE的压力包容能力,降低冷变形倾向。
Adding reinforcement increases the pressure containing capabilities of TFE by reducing its tendency to cold-flow.
当压力施加到材料上时,冷变形发生,材料向远离压力的方向流动。
Cold flow occurs when pressure is applied to the material, and it flows away from the pressure.
介绍了冷变形模具钢渗钒的基本原理和工艺方法以及渗钒层的性能。
Basic theories and process of V permeating of die steel and performance of V permeating layer were introduced.
研究结果表明,冷变形后不同温度下扩散处理的复合界面状况存在差异。
Diffusion bonding results indicate that the interface situation is different merely by a cold drawing and then a diffusing process.
亚稳奥氏体不锈钢冷变形后产生形变诱发马氏体,影响其物理和化学性能。
The deformation induced martensite in metastable austenite stainless steels affects their physical and chemical properties.
亚稳奥氏体不锈钢冷变形后产生形变诱发马氏体,影响其物理和化学性能。
The deformation induced martensite in metastable austenite stainless steels effect their physical and chemical properties.
当冷变形率在20%左右时,出现变形孪晶,使得合金强度有大幅度提高。
During cold drawing, the alloy exhibited excellent workability. Deformation twins appeared when the reduction of cold deformation was around 20%.
时效前冷变形能大大加快第二相的析出过程,使合金综合性能得到显著提高。
The precipitation process of the secondary phase could be accelerated by cold deformation before aging, which greatly improved the properties of the alloy.
通过测量硬度和观察组织,确定了几种冷变形钢的再结晶温度及其影响因素。
The recrystallization temperature of cold deformed steels and its influencing factors have been studied by measuring hardness values and structure observation.
研究了均匀化处理、固溶时效、冷变形时效等对铬青铜显微组织和性能的影响。
The microstructure and properties of chromium bronze after homogenizing treatment, solid solution and aging treatment, cool deformation and aging was studied.
研究了镍基合金冷变形管坯退火裂纹与加热温度的关系和退火裂纹产生的原因。
The relationship between annealing cracks and heating temperatures of Ni-based alloy cold-formed billets and the causes of annealing crack occurrence are studied.
而时效前冷变形可以增加合金内部位错等缺陷的数量,加速了合金第二相的析出。
The deformation before aging can increase the defect's quantity in the alloy, and accelerate the precipitating of the second phase.
冷变形过程中材料的组织、性能的变化规律,以及不同加工率对热处理后组织的影响。
The law governing the changes of the structure and properties during cold deformation as well as the effect of different deformation ratios on the structure after heatment are also discussed.
分析了表面处理方法、冷变形、扩散退火温度和时间等工艺因素对界面结合强度的影响;
The influences of process parameters include surface preparation method, cold deformation, diffusion temperature and time.
塑性流动的特殊情况是冷变形,发生在硫化橡胶长时间连续承受低应力时以及金属蠕变时。
Special instances of plastic flow are cold flow, which occurs in vulcanized rubber after low stress has been continuously applied for a long time, and creep of metals.
经渗碳及淬火后,具有表面硬度高、心部韧性好的特点、冷变形塑性中等,切削加工性好。
Carburizing and quenching, with high surface hardness, good toughness characteristics, the heart of cold plastic deformation of medium, cutting is good.
这种新牌号合金代用某些常用冷变形模具材料,如工具钢,钨钴合金,模具寿命明显提高。
When this new material is used as cold dies instead of the usual materials, such as tool steels or tungsten carbide, the life of these is longer.
本文研究了热处理和冷变形对铜铬锆电极合金性能的影响,并确定了电极合金的工艺最佳参数。
In this paper, the effect of cold-work and heat treatment on the properties of Copper-Chromium-Zirconium electrode alloy is dealt with, its optimum processing parameters established.
研究了不同热处理工艺、冷变形量与含有微量稀土元素和镁的新型低铍低镍铜合金性能的关系。
In this paper, the relation between the properties of the new Be-Ni-Cu alloy containing a small amount of re and Mg element and the different heat treatment process and cold work.
接头延伸率的改善同热影响区冷变形程度的减弱及焊缝强度、应力水平同母材趋于一致有很大关系。
Improvement of elongation of joint is related to weaker cool deformation degree of heat affect zone (HAZ) and uniformity of strength and stress level between weld and base metal.
通过测试力学性能和导电性能,对铜铬合金进行了冷变形及退火工艺的探索,并进行了强化机理分析。
Cold deformation and heat treatment have been studied through testing mechanical property and conductivity of Cu-Cr alloy, and strengthening mechanism has been presented in the paper.
冷变形提高了钢中位错密度,也加剧了位错分布的不均匀性,后者是预应变加速组织演变的直接原因。
Cold deformation results in increasing of dislocation density and inhomogeneous dislocation distribution, the latter is the direct reason for pre-strain to promote microstructural evolution.
用TEM、电阻、力学性能试验等方法研究了固溶后的冷变形对6082铝合金时效析出过程的影响。
The effect of cold deformation on the aging precipitation of the solution-treated 6082 Al-Mg-Si alloy was investigated by the methods of TEM, electric resistance, mechanical properties tests.
研究了用铜铬锆电极合金经三道工序冷挤压成点焊电极的工艺,还探讨了挤压冷变形对合金性能的影响。
A process for fabricating CuCrZr alloy spot-welding electrode by three cold extrusions is developed, with effect of cold deformation on alloy properties explored.
研究了用铜铬锆电极合金经三道工序冷挤压成点焊电极的工艺,还探讨了挤压冷变形对合金性能的影响。
A process for fabricating CuCrZr alloy spot-welding electrode by three cold extrusions is developed, with effect of cold deformation on alloy properties explored.
应用推荐