用无侵蚀介质代替侵蚀性冷却介质。
Instead of aggressive cooling medium with no erosion medium.
最后阐述聚合物冷却介质的维护。
And finally, the maintenance of the polymer quenchants has been dealt with.
并与压缩空气和冷却介质进行热量交换。
And with the compressed air and the cooling medium to exchange heat.
过去，普遍采用空气作为励磁系统各部件的冷却介质。
In the past, air WAS the common cooling medium for components of most excitation systems.
在热交换室的炉壁上设有冷却介质进口和冷却介质出口；
A cooling medium inlet and a cooling medium outlet are arranged on the furnace wall of the heat exchange chamber.
搅拌可使冷却槽内的冷却介质不断循环，使温度均匀一致。
Agitation can make the cooling medium cooling groove continuous cycle, so that the temperature is uniform.
磁控 靶内设有冷却室，冷却室设有冷却介质进口和出口。
There is a cooling chamber with inlet and outlet for cooling medium inside magnetron targets.
从冷却介质、冷却方法上作了探讨，提高了钢的机械性能。
The paper discusses the cooling intermediary and means to raise mechanical function of steel.
随着型材外层的固化，它会将内层材料与冷却介质隔绝开来。
As the outer skin of a profile solidifies, it insulates the inner material from the cooling medium.
研究了不同冷却介质对贝氏体耐磨钢板组织和力学性能的影响。
Effects of different cooling medium on microstructure and mechanical properties of bainite wear resistant steel plate were investigated.
研究了不同冷却介质对新型贝氏体铸钢组织和力学性能的影响。
The effects of different cooling medium on microstructure and mechanical properties of new type bainite cast steel were studied.
整个装置通常是放置在石油中的，既作为电绝缘体又做冷却介质。
The entire assembly is usually submerged in an oil both which serves as an electric insulator and a cooling medium.
干煤/冷却介质（气体或空气）均匀的穿过冲孔板上被输送的产品层。
The drying/cooling medium (gas or air) evenly penetrates the product bed which is being conveyed across the perforated plate.
空空中冷器以空气为冷却介质，主要用于车用发动机的增压空气的冷却。
Charge air cooler USES cooling air to cool the compressed air from diesel engine turbo charger.
所用冷却介质通常为空气和液体(主要是水)，可以单独使用或联合使用。
The cooling agents customarily employed are air and a liquid (usually water), either alone or in combination.
预测了反应温度、冷却介质温度、反应压力和反应空速对加氢反应结果的影响。
The influence of reaction temperature, coolant temperature, reaction pressure and reactor air speed was predicted.
罐体上设有米洛板或迷宫式夹套，可通过加热或冷却介质来进行循环加热和冷却。
On the tank tody install Milo board or labyrinth type clamp cover, which can contain heating or cooling medium to heat or cool cyclically.
冷却界面可结合 至电子元件如芯片上，冷却介质供给到通道组中的至少一组。
The cooling surface can be attached to an electronic component, such as a chip, and refrigerant supplied to at least one of the sets of channels.
本文探讨了在食品的冷却与冻结过程中，提高冷却介质的压力对食品干耗的影响。
It will been discussed that the influence of increasing the pressure of cooling medium on the weight loss in the process of cooling and freezing of food.
在蒸发器内，该液体被气化为低压气态，同时吸取被冷却介质的热量产生制冷效应。
In the evaporator, the liquid inside was for low pressure gas, and gasification draw was cooling medium heat produce refrigeration effect.
制备过程中，外部冷却控制器和内部冷却控制器中通入冷却介质，均匀浆料的温度场。
During preparation, the cooling medium is flowed in the external cooling controller and the internal cooling controller so as to lead the temperature field of the slurry to be uniform.
采用冷却介质性能检测仪对新型聚合物型冷却介质KHP-W的静态冷却性能进行了探究。
The statistic cooling characteristic of a new type of aqueous polymer quenchants(KHP-W) was researched by using testing instrument.
本实用新 型结构简单，采用自流式冷却介质，动力消耗小，传热效率高，可循 环使用。
The utility model has simple structure, and adopts gravity flow type cooling medium, thus having small power consumption, high heat transfer efficiency and cycle use.
利用传热学原理估算了带钢连续退火生产中采用氢气和氢气加雾化水冷却介质的冷却速度。
The strip cooling rate with hydrogen and hydrogen plus water spray on continuous annealing line is estimated according to the heat transfer principle.
合理选择淬火冷却介质和确定零件的材料使产品质量取于受控状态和确保产品质量的提高。
The rational selections of quenching medium and material of parts will help product quality be a controlled condition and ensure raising product quality.
高压气态制冷剂在冷凝器中向冷却介质放热被凝结为液态后，经节流装置减压降温进入蒸发器；
High pressure gas refrigerants in the condenser cooling medium heat to be setting for liquid, through the throttle device reduced pressure cooling into the evaporator;
后冷却器的工作原理在于利用了冷却介质(如水或空气)与后冷却器出口处压缩空气的温度差异。
After cooler work principle is that use of the cooling medium (such as water or air) and after cooler the exit of compressed air temperature difference.
冷却介质主流发生相变的点称之为蒸发点，其后随着介质不断吸热，气态含量增多，蒸汽干度上升。
Along with the increase of decalescence of cooling medium, gas contents increases and degree of dry steam rises.
在冷却介质出口温度或传热温差选定的情况下，可以由第二个条件计算满足热稳定性的平均停留时间。
When the outlet coolant temperature or heat-transfer temperature difference is chosen, the acceptable mean residence time can be calculated by the second limiting condition.
在冷却介质出口温度或传热温差选定的情况下，可以由第二个条件计算满足热稳定性的平均停留时间。
When the outlet coolant temperature or heat-transfer temperature difference is chosen, the acceptable mean residence time can be calculated by the second limiting condition.
应用推荐