该方案涵盖冶金分析、剖面测量、涡流裂纹检测和测量。
It covered metallurgical analyses, profile measurements, and eddy current crack detection gauging.
从材料的冶金分析入手，分析了“哥伦比亚”号航天飞机爆炸的原因。
Metallurgy analysis of Columbia debris materials was proceeded in order to study the cause of Columbia Tragedy.
评述了云南分析工作者2006年期间在国内发表的有关冶金分析的研究论文。
The local published technical papers related to metallurgical analysis written by Yunnan authors in 2006 are reviewed.
分析了河北省冶金理化检验的现状，提出了提高河北省冶金分析水平的几点建议。
The situation of physical and chemical test in metallurgical business of Hebei is analyzed, some Suggestions to raise the test level proposed.
借助现代冶金分析技术对闭塞冷锻行星齿轮的晶粒尺寸、硬度变化和残余应力分布规律进行了研究。
By virtue of modern metallograph analyse technology, the size of grain, hardness and residual stress of bevel gear by closed-die cold forging is studied.
借助现代冶金分析技术对闭塞冷锻行星齿轮的晶粒尺寸、硬度变化和残余应力分布规律进行了研究。
The numerical simulation method was applied to analyze the cold closed-die forging process of car used differential satellite gear.
借助现代冶金分析技术对闭塞冷锻行星齿轮的晶粒尺寸、硬度变化和残余应力分布规律进行了研究。
Study on microstructure and properties of closed-die cold forging of bevel gear used in case of automobile differential;
本文在对冶金企业事故进行统计分析的基础上，论述了冶金企业的危险和有害因素。
Based on the statistical analysis to the accidents in the metallurgical industry, the dangerous and harm factors in the metallurgical industry is discussed in this article.
介绍了微波消解溶样技术的基本原理、点及其在冶金化学分析中的应用。
This paper introduces the basic principle, advantages and application of microwave sample-dispelling technology applied in metallurgical chemistry analysis.
论述了冶金行业蒸汽系统的现状，进行了节能潜力和效果分析，并提出了今后搞好该项工作的几点建议。
The paper discusses the present situation of steam system in metallurgical industry, analyzes energy-saving potential and effects, and puts forward some advice for doing the work well.
对大型冶金企业建造电子轨道衡的型号选择、土建施工及检定几个方面进行了分析。
The type selection, construction and check of electronic track weigher in large metallurgical business are analyzed.
化学试验分析配合单位包括中国钢铁冶金技术处化学试验组、国宏股份有限公司。
Coordinating units for chemical experimental analyses including China Steel Structure Company Metallurgy Division chemical experiment unit and Kuo Hung Ltd.
结合COMI炼钢工艺冶金反应热力学分析、物料及能量计算及热态实验研究，证实了COMI炼钢工艺的可行性。
Based on metallurgical reaction thermodynamic analysis, materials and energy calculation and thermal test of COMI steelmaking process, the feasibility of COMI steelmaking process could be confirmed.
本文从业主的角度，分析了业主进行大型冶金建设项目管理的体系和方法。
From the Angle of proprietor, the paper analyzed the proprietor to carry on the management system and the method of the large-scale metallurgical.
进行中间包挡墙和坝的水模型实验，分析原方案的冶金效果，在此基础上提出优化设计方案。
By water simulation experiment on tundish dam and weir, metallurgical effect of the original design is analyzed and the optimal design scheme is offered based on these researches.
论述了磁场对凝固组织，净化以及相变的影响，分析了自感生磁场在等离子束表面冶金中的作用。
The application of the induced magnetic field in surface plasma jet metallurgy, from the influences of freezing morphology, purification and phase transformation were summarized.
论述和分析了非平衡态等离子体冶金效应的作用机理、影响因素及研究概况。
The mechanism of metallurgical effect of non equilibrium plasma, its influence factors and application were expounded thoroughly.
能量色散x荧光分析仪作为一种重要的核分析工具，在地质、冶金、建材、环境等领域有着广泛的应用。
Energy dispersion X-ray fluorescence spectrometer (EDXRF) is an important nuclear analysis tool, which is widely used in the fields of geology, metallurgy, architectural material and environment.
本文介绍了除硅滤饼的来源、成份构成、现在冶金行业去向、综合利用的可行性分析。
New briefing for the source, ingredient, abuliding in iron and steel industry of the filter cake of desiliconization and its feasibility analysis.
作者认为，显微组织分析是控制和判断粉末冶金铜—钨触头质量的重要方法之一。
The analyses of microstructure is one of the important methods for controlling and evaluating the qualities of copper-tungsten alloy contactors.
应用分析电子显微术对粉末冶金高速钢的精细结构进行了研究。
The fine scale microstructure of powder metallurgy high speed steels has been investigated by using analytical electron microscopy.
分析了冶金企业皮带运输机在生产中发生人身伤害事故的原因，探讨了事故发生的规律，从管理、技术等方面提出了防范措施。
The causes of conveyor-belt accidents happened in metallurgical enterprises are analyzed, the rules on the happening of accidents are discussed and some measures for the prevention are put forward.
通过大量改造后的LF实践数据，分析了工艺改进后精炼渣的冶金效果，同时提出了适宜的精炼渣系。
Based upon large amount of practical data on revamped LF, the metallurgical effects of refining slag are analyzed, and the suitable slag system is suggested.
在对重有色金属湿法冶金存在主要问题进行分析的基础上研究成功的矿浆电解新技术，是一种清洁、高效的提取冶金。
Slurry electrolysis process, which is researched on the basis of analyzing the main problems in heavy non-ferrous hydrometallurgy, is a clean, energy efficiency extractive metallurgical method.
论述绍了在冶金废水悬浮物分析中水样的代表性、滤纸的恒重及对盐分的吸附等需要注意的一些问题。
The problems of representativity of water sample, constant weight of filter paper and absorption of salt in the analysis of suspension of metallurgical waste water are discussed.
详细分析了等离子束表面冶金熔池的凝固机理、凝固特征及对凝固组织的影响。
The freezing mechanics, characteristic and influence on structure of plasma-jet surface metallurgy have been analyzed in full.
分析了蓄能器在冶金设备中的作用，列举了典型例子说明蓄能器在冶金液压系统中消除设备缺陷的重要作用。
The function of accumulator in metallurgy facility was analyzed in this paper, and meanwhile, the important action of accumulator to eliminate facility tailures was introduced.
本文通过分析冶金工业的需求，制定了系统的设计与实现原则。
Through analyzing of the demand of metallurgical industry, we obtain the design and apply rules of CFD system.
本文通过分析冶金工业的需求，制定了系统的设计与实现原则。
Through analyzing of the demand of metallurgical industry, we obtain the design and apply rules of CFD system.
应用推荐