提高热变型温度和代温冲击强度。
Impact heat distortion temperature and low; temperature impact strength.
在低温下也能承受高冲击强度。
提高热变型温度和低温冲击强度。
Improved heat distortion temperature and low temperature impact strength.
冲击强度和静强度是什么关系？
它具有柔韧性好、冲击强度高等特点。
它具有柔韧性好、冲击强度高等特点。
而且还能够让墙面的抗冲击强度得到一定的增加。
But also to make the wall of the impact strength has been increased.
熔覆层具有较好的拉伸、冲击强度和较好的韧性；
The cladding layers have good tensile, impact strength, and good ductility.
并对复合材料的冲击强度、阻燃性能进行了测试。
The impact strength and the flame retardancy of the composites were tested.
增韧树脂比未增韧树脂得到的增强塑料冲击强度要高。
The impact strength of reinforced plastics by toughened resin is higher than byuntoughened resin.
这种加强的负作用通常是抗冲击强度降低及磨损性增加。
The negative effect of this reinforcement is usually a decrease in impact strength and an increase in abrasiveness.
该涂料可室温固化，并有着优良的附着力和耐冲击强度。
The coating can be solidified at room temperature, with excellent adhesion and Impact strength.
但抗弯曲强度和冲击强度及较高的延性，与金属不相上下。
But the ductility of flexural strength and impact strength and higher, and the metal be roughly the same.
研究了共混体的相结构、冲击断裂机理和冲击强度之间的关系。
The relationship between the phase structure, the impact fracture mechanism and the impact strength of the blends was investigated.
与市面上的井盖不同的是，它是用液压机压出来的，抗冲击强度较大。
Unlike the market covers is that it is pressed out by hydraulic machine, high impact strength.
结果表明，对共混体系缺口冲击强度影响较大的为体系中PC的含量。
The results showed that the using amount of PC had a great effect on the notched impact strength.
分别讨论改变脉冲力的冲击强度和冲击波形时对系统减振效果的影响。
The affect of system shock absorber are also part-discussed by changing impact strength of pulse force and impact waveform.
最重要的是，前后不一致的冲击强度从一批批的机会增加了部分破损。？
On top of that, inconsistencies in impact strength from batch to batch increased the chances of having part breakages . ?
PC板材最显著的优势是透光率高，耐冲击强度高等成为建材市场宠儿。
PC board is the most significant advantage is the high light transmittance, resistance to impact strength higher makes building materials market favorite.
其冲击强度是聚氯乙烯的20倍，尼龙66的10倍，聚四氟乙烯的8倍。
Its impact strength is 20 times that of polyvinyl chloride, nylon 10, 66 times, 8 times of ptfe.
研究结果表明，复合材料的冲击强度、拉伸强度随玻纤用量的增加而提高。
The result showed the impact strength and tensile strength of the composite increased with the increase of the content of the glass fiber.
结果表明，随着碳纤维布含量的增加，复合材料的拉伸强度、冲击强度提高；
The results show that the tensile strength and impact strength of the composite increase with the increase of carbon fiber cloth content.
研究了温度对聚氯乙烯PVC缺口冲击强度、断口形貌特征及断面粗糙度的影响。
The effects of testing temperature on notch impact strength, fractographic features and fracture surface roughness of PVC have been studied.
结论牙托粉的分子量和分子量分布对义齿基托的挠曲强度和冲击强度有较大影响。
Conclusion the molecular weight and the distribution of molecular weight of denture base powder obviously affect flexure strength and impact strength of denture base.
结果表明，桐油改性酚醛树脂的剪切强度、冲击强度较未改性树脂大，硬度适中。
The results showed that the shear strength and impact strength were superior to those of pure resin, and the hardness was mezzo.
板材的玻璃化温度、拉伸强度、冲击强度和溶液黏度均随摩尔质量的增大而增大。
The glass transition temperature (T_g), tensile and impact strengths, and the solution viscosity of the PMMA plate increased with the increase of M_w.
结果表明：不同粒径的竹粉对复合材料拉伸性能、弯曲性能及冲击强度均有显著的影响。
Results showed that different particle sizes of bamboo flour had obvious effect on the tensile strength, flexural strength and impact strength of the samples.
载荷和抗冲击强度试验，发现这种井盖的载荷力为24吨，抗冲击强度也超过了普通井盖。
Load and impact strength test, found that this covers the load of 24 tons, the impact strength is higher than that of conventional manhole cover.
而随着EM G含量的增加，材料的冲击强度显著提高，且其它的力学性能基本保持不变。
The notched Izod impact strength of alloy increases with the increasing of EMG content in the condition of keeping other mechanical properties.
而随着EM G含量的增加，材料的冲击强度显著提高，且其它的力学性能基本保持不变。
The notched Izod impact strength of alloy increases with the increasing of EMG content in the condition of keeping other mechanical properties.
应用推荐