根据在太祁高速公路晋祠高架桥箱梁预制中的施工情况，介绍了预制箱梁的内模设计与应用。
Combined with the construction, the paper introduced the design and application of precast box beam inner form.
日产混合动力风雅（FUGA）汽车已经配备了‘森林交流’（Forest AC）空气调节系统，其设计目的是在车内模拟自然森林的清新微风、温度、湿度和气味。
Nissan's hybrid FUGA car is already using the 'Forest AC' air conditioning system which is designed to recreate 'the refreshing breezes, temperature, humidity and aroma of natural forests'.
本文采用自行设计的试验装置进行了室内模拟试验，探明了相关因素对浸润面高度的影响规律及浸润面高度与浸出率之间的关系。
In this dissertation, the influence rule of the saturated surface and the relation of the saturated surface and leaching rate are proved up by simulating heap leaching in the lab.
本文针对TCP网络系统的时滞特性，设计基于内模补偿控制器，提出了基于幅值与相位稳定裕度的控制参数整定方法。
The internal mode compensation controller is designed for the delay performance of TCP network system. The controller tuning method is presented based on the gain and phase margin.
针对多变量强耦合的被控系统，提出了一种简化的内模解耦控制设计方法。
In view of strong coupling system, a kind of simple internal model decoupling control designing method is presented.
所设计的多变量内模控制器能使系统稳定解耦，所得到的闭环系统根据开环系统时滞来描述。
All the stabilizing IMC controllers and the resulted closed-loop systems were characterized in terms of the open-loop system's time delays.
在大时变鲁棒数字PID控制方法的基础上，结合二自由度的内模控制结构，实现了控制器参数的数字双PID分离设计。
Separate designs of a dual PID controller were presented based on the large time-varying robust digital PID control combining with two degrees of freedom internal model control structure.
针对火电厂主汽温对象大迟延、不确定性的特点，结合内模控制器设计了基于自适应PS D控制器的控制系统。
In view of large delay and uncertainty of the main steam temperature object in a power plant, combining with internal model controller, a control system based on adaptive PSD has been designed.
该文采用一种新的全极点逼近法，设计基于内模原理的PID反馈控制，只需调整一个参数。
This paper using a new method of approaching the all-pole approximation, designing based on IMC-PID control just need adjusting one parameter.
文章用径向基神经网络设计内模控制系统。
This paper designs a internal model control system with radial basis function neural networks.
设计了室内模拟装置：在水池内放置排列的钢电极和可控制干扰电场。
A special device with arranged steel electrodes and controlled interferential electric field in water pool was designed.
针对光电跟踪系统，提出一种基于内模控制原理的新型位置控制器设计方法。
A novel position controller for an electro-optical tracking system is designed based on Internal Model control (IMC) principle.
外环则针对负载转动惯量的变化，设计了基于内模原理和零极点配置的自校正控制器。
To against variety of load inertia, a zero pole placement self tuning regulator basing on inner model is designed in the outer loop.
最后，针对工业过程中常见的多变量多时滞输入输出系统，提出了一种双内模解耦控制器矩阵的设计方法。
At last, a decoupling dual internal model controller matrix design method is proposed for multi-variable time-delay input-output system in industrial processes.
本文主要研究时滞多变量系统的内模控制方法的设计，以期找到简单、有效、实用的方法。
This paper mainly studies internal model control designed for the multivariable time-delay system in order to find simple, effective and practical method.
介绍了内模控制器(IMC)的基本原理，给出了系统存在不稳定零点和极点时的设计方法。
The fundamental principle of Internal Model controller (IMC) is introduced. The design method of the controller when the system has unstable zeroes and poles is proposed.
设计了一个室内模型试验装置，来研究支盘桩的承载和变形性能以及影响因素。
A model test equipment had designed to go into bearing property and other influence factors about the piles with branches and plates.
针对具有此种情况的大纯滞后工业过程，提出了一种将内模控制与双口控制相结合的改进的内模控制器设计方法。
An internal model controller design for industrial process with dominant delay is proposed, it makes internal model control combine with double-port control and is a proved technique.
采用室内模型试验对路堑边坡锚固格子梁进行了研究，获得了一些有益的结论，对设计提出了一些有益的建议。
Indoor model tests are carried out for researches of anchor grid beams of cut slopes. The helpful solutions are obtained and some good Suggestions on design are given.
在陈庆伟学者提出的连续时间双口内模控制的基础上，提出了一种针对伺服系统的离散时间双口内模控制器设计方法。
Design method of a kind of discrete time two-port internal model controller (IMC)of servo system was proposed based on continuous-time two-port internal model control.
为了进一步证明该理论的可靠性，特设计了一个室内模拟实验。
In order to further prove the reliability of the theory, an indoor simulation experiment was designed especially.
通过力学计算设计的室内模型能较好地模拟荷载型反射裂缝和评价不同混合料的抗反射裂缝能力；
The model designed through finite element analysis can simulate the reflective cracking caused by load and evaluate the reflective cracking resistance of different asphalt mixtures.
通过室内模拟试验，利用析因设计法研究了魔芋超强吸水剂(KSAP)对土壤保水性能的影响。
By the laboratory experiments, the effects of konjac super absorbent polymer (KSAP) on water preservation in soil were studied using factorial designed experiment.
本文通过对被控对象模型的传递函数并行结构分解，引入多重输出误差反馈，并根据内模结构来设计系统控制器。
In this paper, multiple output error feedbacks are introduced via the parallel decomposition of the plant transfer function in the internal model control system.
根据内模控制原理及光电跟踪系统参考输入及扰动输入特性，设计了一种新型位置控制器。
A novel position controller for an electro-optical tracking system is designed based on Internal Model control (IMC) principle and characteristic of disturbance and reference input for system.
为了在室内模拟测试一定大气条件下距离选通成像系统的分辨力，设计了一套模拟测试装置。
To measure and evaluate the resolution of range-gated imaging system under certain atmosphere conditions, a simulating measurement setup is designed.
本文系统地介绍了双闭环试验台的工作原理，主要工作部件的参数设计，并对手扶拖拉机室内模拟试验技术问题进行了探讨。
Working principles of dual closed-loop tester and parameter design for its major parts are introduced and indoor simulation testing technique for walking tractor discussed.
根据内模控制器是被控对象逆动态逼近的原理，由被控对象的脉冲响应来设计FIR型控制器。
An FIR controller is designed directly to approximate the inverse plant dynamics defined by its im-pulse response in internal model control (IMC) system.
而这主要是由国内模具设计制造水平低、速度慢引起的。
It is mainly due to the low level of mould design and manufacture and the low produce speed.
针对电阻炉温度被控对象的纯滞后特性，设计了内模pID鲁棒控制器。
The resistance furnace temperature is a time delay system, an internal model PID robust controller is presented in this paper.
应用推荐