利用该关系式建立了出砂判别模式和井壁稳定性分析模式,在实践中取得了较高的符合率。
The relation formula is used to develop the sand production test model and wall stability analytical model.
从而建立了同一普通螺纹中两者之间的定量关系式;
Their quantitative relation is set up in the same screw thread.
采用动力接触有限元法分析强夯中夯锤对地基土的冲击碰撞过程,建立动接触力与速度之间的接触关系式。
Uses dynamic contact FEM to analyze impact and collision of hammer to foundation soil in the dynamic compaction, establishes the contact relation between dynamic contact force and speed.
分析并建立了开采轮数与开采步数之间的数学关系式;
Then the relation of the mining round and mining step is established.
本文用一种简单的方法建立了熵的玻尔兹曼关系式。
Using a simple method, this paper established a Boltzmann relation on entropy.
基于连续流体理论和其运动学关系,建立了力平衡方程关系式。
The force balance relations were set up on the basis of continuum fluids theory and the kinematic relations.
根据材料力学理论建立了活塞环环向应变与径向压力之间的关系式。
The relation between hoop strain and radius-directional pressure was set up based on the theoretics of mechanics of materials.
通过建立线材连轧流量方程,推导出拉钢系数与轧件拉缩宽度的关系式,并借此分析高速线材头尾超差问题。
The relationship between the pulling coefficient and the width of pull contract for rolled piece was derived by means of establishing flow equation during continuous rod rolling.
建立了玉米植株的力学模型,给出了玉米抗倒伏性质的参数关系式;
A dynamic model for maize plant is established, and the formula of parameter relation about maize lodger resistance is put forward.
目的:建立植物挥发油提取量与提取时间关系式。
Objective: To establish the relationship equation of yield and extraction time of plant volatile oil.
对铬镍钢强度与硬度之间的关系进行了回归分析,建立了相应的回归关系式。
Regression analyses of the relations between strength and hardness of chrome - Nickel steel are carried out, the relevant formulas of the regression relations are set up.
建立了一种以柴油组分油的恩氏蒸馏数据为基础的数学关系式,用于预测柴油调合油的冷滤点及凝点。
A mathematical model based on the distillation data of diesel components was developed to predict the cold filter plugging point and solid point of the blended diesel fuels.
文中建立了岩石应力敏感指数与压缩系数之间的理论关系式。
A theoretical formula is proposed between the stress sensitivity index and the compressibility of rock.
以蒸汽加温为建模对象,建立管道内蒸汽温度跟蒸汽流量的动态关系式,组成温室用蒸汽管道进行加温时的温度对象模型。
Considering the vapour heating as the modeling object, the dynamic formula between vapour temperature and vapour flux of the pipe is set up.
对铬钼钢强、硬度之间的关系进行了回归分析,建立了相应的回归关系式。
Synopsis Regression analysis has been conducted on the relationship between the strength and hardness of Cr-Mo steel and the regression formula accordingly set up.
建立了定量关系式,并绘制了PE混合体系的MFR与组成关系图。
Quatative relation formula is set up and MFR-component relation graph of PE mixture is also drafted.
对铬镍钼钢强度、硬度之间的关系进行了回归分析,建立了相应的回归关系式。
In this paper regression analyses for the relations between strength and hardness of chrome - Nickel - Molybdenum steel are carried out, the relevant formulas of the regression relations are set up.
建立了初始切线模量与围压、超固结比、初始孔隙比之间的关系式,并通过三轴试验进行验证。
The relations between initial tangential modulus, confining pressure, over-consolidation ratio and initial void ratio were deduced, and were proved through triaxial compression test.
本文分析了皮带传动的受力本质,并建立皮带传动的力学关系式。
In this article, writer has analyzed the mechanical essence between the belt and the wheel, and has set up the mechanical equation of belt transmission.
建立了一个基于二进制编码结构光的三维形貌测量系统,推导了测量系统的物象关系式,并对测量系统进行了标定。
In order to measure the shape of three-dimensional objects, a non-contact system based on binary-code light projection method was developed.
通过分析试验数据,找到电积液的密度与锌离子浓度、硫酸浓度以及温度之间的变化规律,并且建立了相应的经验关系式。
From the experimental data, the empirical formula deduced correlating zinc concentration, sulfuric acid concentration and temperature to the density of the zinc sulfate electrolyte.
在已有圆的方差基础上,推导出直线的方差,并建立POCS迭代步长与圆和直线方差的关系式,实现加权的迭代。
Based on the variance of circle, the variance of line is derived, and a relationship equation between the variance and the pace of POCS is set up to realize weighted POCS.
对大冶铁矿大理岩和原生矿体的钻孔指标进行监测,建立合理单耗与钻进速度关系式。
Through monitoring and measuring of drilling indices of marble and primary ore body of Daye Iron Mine, a rational relationship between unit energy consumption and drilling speed is established.
建立了系统的设计关系式并展开了它们的对数图形,便于研究和工程应用。
The design formulas are studied and the Logarithmic plots of basic characteristics are developed to facilitate research and engineering application.
本文根据壁龛射流的边界条件,进行射流与通风气流之间运动和力的作用关系分析,建立了壁龛射流的增压关系式。
Based on the boundary condition of jet flow in a niche and the interaction of jet with air current, a pressurization relation equation have been established.
通过水力学模拟试验对铸造铝合金过滤流动过程进行了分析,建立了过滤效率的水力学模拟试验关系式。
The analysis of filtering flow process of aluminum cast alloy based on hydraulic simulation was carried out. The filtering efficiency formula was established.
本文基于推导多波长辐射温度计的理论,推出了一种三波长辐射测温法的新关系式,并建立了三波长辐射温度计的数学模型。
This paper presents a new relationship of three-wavelength radiation pyrometer by a theory of multi-wavelength, and establishes a three wavelength mathematical model.
同时,利用内孔边界条件,建立待定系数间的关系式,以减少待定系数的数目,并且只需要在外边界配点。
In addition, by using the hole edges conditions, the relationship between undefined coefficients is set up, to reduce the number of those coefficients, and only the boundary collocation is needed.
遵循杆件应力约束、几何尺寸约束、刚度约束条件,建立了杆件截面尺寸相互关系式。
Besides, following the constraint of the member geometrical sizes and stiffness, this paper has set up the relationship between member section sizes.
遵循杆件应力约束、几何尺寸约束、刚度约束条件,建立了杆件截面尺寸相互关系式。
Besides, following the constraint of the member geometrical sizes and stiffness, this paper has set up the relationship between member section sizes.
应用推荐