研究了改性聚丙烯酸钠与不同无机吸湿性盐类共混物的吸湿性能。
The moisture absorption property of the modified sodium polyacrylate and inorganic salts mixture was studied.
对聚合物基体及碳系导电填料进行共混或接枝改性是当前主要的研究方向。
Modification of polymer basal body and carbon series conductive filler by grafting and blending is the main direction of current research.
从聚合物结构方面分析了聚乙烯醇(pva)薄膜的水溶性，提出用共混改性方法提高PVA薄膜的溶解性能。
The water-solubility of poly (vinyl alcohol) (PVA) films is analyzed from the polymer structure, the blend modification method is put forward to increase the water solubility of PVA films.
无机矿物质与改性高分子聚合物共混，能够提高肥料包膜的透性。
The inorganic mineral combined with modified high molecular polymer can increase the permeability of coated fertilizer.
介绍了氰酸酯树脂与热塑性树脂、橡胶弹性体、热固性树脂及含有不饱和双键的化合物共混或共聚改性的研究现状。
In this paper, the properties modification of cyanate resin by blending or co-polymerization with thermoplastic, rubber, thermoset resins and olefinically unsaturated compounds is introduced.
本文研究了采用低分子量乙丙共聚物（LMW-EP）对聚丙烯（PP）及其共混体系的改性。
The modification of polypropylene (PP) and its blends with low molecular weight ethylene-propylene copolymer (LMW-EP) was studied in this work.
以共混物平衡扭矩为参数考察了界面改性剂对共混物熔体扭矩的影响；
The effects of interfacial modification on torque of blend melt and crystallization behavior of PP were investigated.
分析了ABS用量和加工工艺对共混物性能的影响，讨论了ABS共混物的增容改性技术。
The influences of ABS and processing conditions on the properties of the blends are analyzed , and the techniques of compatibilization modification are discussed.
综述了唑啉单体的合成及其聚合方法，并对其聚合物的化学改性及共混物作了概述。
This paper describes the methods of preparation and polymerization of monomers of oxazoline. The modification of polyoxazolines by chemical reactions and their blends are introduced.
本文从纤维增强PEEK、颗粒填充PEEK、PEEK表面改性、与聚合物共混等方面综述了PEEK改性研究的进展情况。
Enhancement of PEEK by adding continuous fibre and short fibre, particle fillers, surface modification and blend with polymers were reviewed.
废胶粉经自制表面改性剂ACDI预处理后，其相应的RHDPE/EVA/MWRP体系的拉伸强度和弯曲模量分别增加35%和25%，而对共混物的其它性能影响不大。
The tensile strength and the bending modulus of RHDPE/EVA/MWRP blend increased by 35% and 25% respectively when the waste rubber powder was modified by self-made surface modifier ACDI.
使用丙烯酸酯共聚物(acr)作为氯化聚氯乙烯(cpvc)的改性剂，使用超微细石墨粉体做填料，制备了具有导热性能的共混材料。
Thermal conductivity material was prepared with acrylate copolymer (acr) used as modifier for chlorinated PVC (CPVC) and superfine powdered graphite used as filler.
简要介绍了聚苯硫醚(PPS)与其他聚合物进行共混改性的研究进展。
It briefly introduced the research progress of the modification of polyphenylene sulfide (PPS) blended with other polymer.
此外，对该共混物中，最适宜于PVC改性用的ABS品种，也进行了选择性的探讨。
The ABS varieties most suitable for modification of PVC are also discussed.
EVA具有优良的性能，与通用聚合物进行共混改性，可提高聚合物的性能。
EVA possesses good properties. It can be used to modify general purpose polymers through blending to improve their properties.
以不同含量的乙烯丙烯酸共聚物(EAA)对聚乙烯(PE)进行了共混改性，研究了改性后实验样品中水树的生长情况。
Polyethylene (PE) has been modified by a small amount of mixing ethylene acrylic acid (EAA) copolymer. The water treeing in PE modified was also studied.
PHB化学改性可通过分子设计合成特定结构的PHB共聚物，具有物理共混无法比拟的优势，特别是在组织工程领域有着广泛的应用前景。
The chemical modification of PHB can get PHB copolymer with specific structure by molecule design and has more advantages than physical blending. The PHB copolymer c…
结果表明 ，共混物的韧性随TPU含量的增加而增加且聚酯型的改性效果优于聚醚型 ；
The Morphologic structure was studied by means of SEM. Results indicate, the toughness of blends is raised when TPU content is increased;
结果表明 ，共混物的韧性随TPU含量的增加而增加且聚酯型的改性效果优于聚醚型 ；
The Morphologic structure was studied by means of SEM. Results indicate, the toughness of blends is raised when TPU content is increased;
应用推荐