对于一些材料而言，如氧化物分散强化的合金或者定向固化的低共熔混合物，其使用似乎依赖于一个特殊的创始人或者创始人团队。
For some materials, such as oxide dispersion-strengthened alloys or directionally solidified eutectics, the usage seems to depend upon a particular author or group of authors.
共混过程中的相区尺寸的演变过程具有自相似性，通过求取分形维数，从数量意义上，分析研究相分散动力学过程机理。
The result also show that evolvement process of the phaseregion size has the self-similarity and the fractal dimension can be a good means to study the evolution law of phase dispersion dynamics.
分散相体积分数不同，其最佳共混转速不同。
When volume fractions of dispersion phase are different, the optimal speeds are different.
将PA6和易水解聚酯（EHDPET）以适当比例混合，可制得以EHDPET为分散相的共混纤维。
PA6/easy hydrolytical polyester(EHDPET) blend fiber with EHDPET as disperse phase was prepared by blend spinning.
对分散剂和制膜工艺对共混膜性能的影响作了分析。
The effect of dispersant and preparation technique on performance of composite membranes was analyzed.
共混物在低频区的复数黏度和储能模量随着分散相尺寸的降低而提高；
The dynamic complex viscosity and dynamic elastic modulus of blends increased when the dimension of dispersed phase decreased.
本文将颗粒大小测定方法引入到高分子共混物的分散相尺寸测定中，验证了这是表征分散相尺寸可行的方法。
In this paper a method of particle size measurement introduced into the size and shape measurement of dispersed phase in polymer blend is found feasible.
采用二阶共混法制备了能在沥青中微细分散的LDPE改性沥青。
Low density polyethylene (LDPE) modified asphalt dispersed finely in asphalt is prepared by two step blending process.
采用聚乙烯／聚苯乙烯共混物研究了剪切速率和体积分数对共混物分散相颗粒尺寸的影响。
The results shown that the higher the shear rate, the finer the dispersed phase size.
选择较高的加工温度及较低的剪切速率，可以使共混物PP在高组成比时成为分散相。
Higher spinning temperatures and lower shearing rate caused PP to form disperse phase at higher composition ratio.
方法给予40例符合WHO诊断标准的2型糖尿病患者，服用伏格列波波糖分散片共10周，血糖及学清胰岛素变化情况。
Methods Given Voglibose Tablet to 40 diabetics in accordance with WHO diagnostic standard of type 2 diabetes for 10 weeks and observed their blood glucose, serum insulin.
他手下共7万人，但都分散在南部宾夕法尼亚州的广大地区。
He had seventy thousand men in all. But they were spread over a wide area of southern Pennsylvania.
研究了作为黑母粒载体树脂的LDPE/LLDPE共混物对炭黑分散性的影响。
The effect of blends of LDPE/LLDPE as a carrier resin in black masterbatch, on the dispersion of carbon black was studied .
进行了分散相颗粒形状较规则的单相连续两相共混物细观结构参量对共混物基体屈服的产生和屈服区扩展规律影响的研究。
In this paper numerical simulation was used on investigating the matrix yielding initiation and expansion of polymer blends which has a continuous single phase and a regular particles shape.
发现分散相PA - 6粒径大小、分散程度及与PP基体界面粘结程度对共混体系的介电性能有显著影响。
It is found that the PA-6 particle size, dispersion and the interface adhesion between PA-6 and PP matrix influence the dielectric properties of the blends.
采用塑料分散剂T AS-A与颜料共混应用于聚丙烯塑料着色。
The plastic dispersant TAS-A mixed with the pigments was used for PP colouring.
该共混物由吸水聚合物聚丙烯酸钠分散在苯乙烯基体中形成。
The blends are composed of absorbent sodium polyacrylate (PAANa) particles and PS matrix.
CN100由进口原料制成，分散性极佳，可与50%的自然色树脂共混使用。
CN100 is made of the imported raw materials and have the excellent dispersivity. The compound can be diluted with 50% virgin resin.
同时，加工条件也会对相形态产生影响，我们发现在强的剪切作用下，PA66／PHE共混物的分散相尺寸更小。
The processing conditions can also affect the phase morphology. We find that under the stronger shear force the disperse phase of PA66/PHE blend are smaller.
对于液滴状分散相共混物，共混物的缺口冲击强度和拉伸强度随着基体层厚度的降低而提高。
For the blends with droplets phase morphology, the Izod impact strength and tensile strength increased when matrix ligament thickness decreased.
通过扫描电镜(SEM)观察了该共混物的相结构，富pps Q相形成的球状颗粒较均匀地分散于PVC的连续相中。
The phase structure of these blends was observed by SEM. The spheres of rich PPSQ phase are evenly dispersed in the PVC continuous phase.
不管组分的粘反比和弹性比大小，若分散相的体积分数非常低，共混物的主要形态皆为分散相的球状液滴分散在基体中。
For a minor with much higher elasticity and higher viscosity than the major, clusters of spherical droplets are formed as the v…
研究结果证实了SBR/BR/LDPE完全硫化共混型热塑性弹性体是以塑料为连续相，交联了的橡胶颗粒为分散相的形态特征。
The results indicate that the TPV of SBR/BR/LDPE has the exact morphological structure in which the resin is the continuous phase and crosslinked r…
研究结果证实了SBR/BR/LDPE完全硫化共混型热塑性弹性体是以塑料为连续相，交联了的橡胶颗粒为分散相的形态特征。
The results indicate that the TPV of SBR/BR/LDPE has the exact morphological structure in which the resin is the continuous phase and c…
研究结果证实了SBR/BR/LDPE完全硫化共混型热塑性弹性体是以塑料为连续相，交联了的橡胶颗粒为分散相的形态特征。
The results indicate that the TPV of SBR/BR/LDPE has the exact morphological structure in which the resin is the continuous phase and c…
应用推荐