讨论了一种适用于双轴测试转台的全数字化控制系统结构。
A pure digital control system construction that suits for the Two Axis Test Table is discussed in this paper.
其次,在控制电路的设计上,本文以实现全数字化控制为目标。
Secondly, in the design of control circuit, the issue aims to achieve all-digital control.
采用单片机控制交流电机PWM变频调速,可实现全数字化控制。
Using alternating dynamotor PWM frequency conversion governing controlled by single chip computer can realize digitized control.
为了使陀螺电源的性能指标优良,采用基于DSP的全数字化控制系统。
We adopt the digital control system based DSP in order to improve the performance specifications of gyroscope power.
根据偏磁式消弧线圈的调谐原理和控制方法,深入研究了偏磁式消弧线圈的全数字化控制器。
According to tuning theory and control method of the magnetic bias ASC, the fully digital controller of the magnetic bias ASC is implemented.
在分析和研究高压巡线机器人原控制器的基础上,设计了一种基于DSP的全数字化控制器。
A type of full-digital controller using DSP was designed, which was based on analyzing and researching the former controller of high voltage cable patrolled robot.
采用受限单极模式P WM系统作为全数字化控制器主控通道,是实现控制器快速可靠设计的关键技术。
The key technology of realization of quick and reliable design of controller is to apply the limited unipolar pattern PWM system as the primary channel of the fully-digitized controller.
对于嵌入DPSCM的磁铁电源可以实现全数字化控制,并达到高精度直流稳流电源输出精度的控制需求。
Magnet power supply with embedded DPSCM can achieve all-digital control, and achieve high precision DC stabilized power supply output accuracy control needs.
介绍一种用TMS320F 2812实现的在线式UPS的全数字化控制系统,给出系统的硬件结构及软件设计方案。
A fully digital controlling system of the on-line UPS by using a TMS320F2812 is introduced, and its hardware structure and software design are proposed.
为了使电动机控制与信息系统紧密结合,同时也为了提高电动机速度调控系统自身的性能,必须使电动机速度调控系统实现全数字化控制。
For the combination of motor control and the information system, and the improvement of motor control system, it's necessary to implement the digital control on the motor control.
为了提高开关频率和控制精度以达到更好的效果,设计中采用数字信号处理器TMS320F 2812作为控制芯片,实现了全数字化控制。
And this design makes DSP TMS320F2812 be control chip. This method improves switching frequency and control precision. It can achieve Full Digital control.
通过实际系统试验证明,该数字触发器应用在微机控制全数字化传动系统中获得了满意的效果。
The testing results of a practical system have proved that satisfactory effects are obtained when the digital trigger is applied to the control of fully digital drive systems.
全数字化线路开关和单片机控制服务复位时间。
Fully digital line switching and MCU controlled service reset timing.
论文中选用TMS320F 240数字信号处理芯片作为系统的主控芯片,实现了全数字化的直接磁场定向的矢量控制系统。
TMS320F240 digital signal processor that is selected as the main CPU in the system realizes the full digital vector control system.
本文针对转子磁场定向的矢量控制技术进行了一些研究和探索,并用DSP实现控制系统的全数字化设计。
This paper does some research works of the vector control technology based on rotator field oriented and then designs the whole system with DSP.
本文主要研究了基于全数字锁相环的谐振型逆变器频率跟踪的数字化控制方案。
The paper studies digital control scheme of resonance inverter frequency-tracking based on all digital phase-locked loop.
提出了一种基于空间矢量的全数字化预测电流控制SPWM逆变器。
This paper describes a completely digitized predictive current controlled SPWM inverter based on space vector.
HTR -10控制棒控制系统采用全数字化的分布式控制系统,实现了全部的控制、连锁和监测要求。
The rod control system of HTR 10 is a full digital distributed control system, and carries out the entire requirements on control, interlock and monitoring.
给出了一种基于数字信号处理器TMS320 LF 2407a的全数字化车用异步电机直接转矩控制系统,并介绍了该控制系统的硬件和软件结构。
A direct torque control system of fully digitized vehicle used asynchronous motor based on DSP TMS320LF2407A is given out, while introducing this system's hardware and software structures.
在全数字化高频大功率UPS中,大都采用两片或多片dsp与单片机共同完成较为复杂的控制和监控任务。
In total number high frequency high-power UPS, there are two or more pieces DSP and SCM accomplishing the control and supervision missions which are complicate.
本文以滑模变结构为控制核心,研制了以DSP为控制芯片的全数字化全桥移相软开关电源。
This paper presents a digital controlled full bridge ZVS PWM switching power supply, which is based on sliding mode control method by using DSP.
现场总线使得现场仪表之间、现场仪表和控制室设备之间构成网络互联系统,实现全数字化、双向、多变量数字通信。
Fieldbus can link field instruments, field instruments and equipments in control room into a network system and implement total digital, bi-direction and more variables communication.
并对全数字化的控制器的软硬件设计,尤其是人机界面的程序和功能作了详细说明。
And the hardware and software design of a digital control device and especially the program and function of an operating interface were lucubrated in this thesis.
本文提出了一种用微型机控制的全数字化直流可逆调连系统。
This artical proposes a microcomputer-based fully digitized reversible speed-regulating system for DC motor.
控制回路采用全数字化设计,实用性强、可靠性高、能满足实际的需要。
The control loop USES all-digital design, the usability is strong, the reliability is high, can meet the scene actual needs earnestly.
系统的测试结果表明,基于DSP的无刷直流电动机控制系统,可以实现对电动机的全数字化双闭环控制。
The testing results show that the control system based on DSP can implement closed loop control the DC motor.
全数字化操作面板,所有控制指令由CPU执行完成。
Digital operation panel, All control instruction are to be executed completely by CPU.
全数字化操作面板,所有控制指令由CPU执行完成。
Digital operation panel, All control instruction are to be executed completely by CPU.
应用推荐