给出了一种根据现场有关实测参数，借助模型求取工作点流量和风机全压，以实现动态工作点监视的简便方法。
A simple method is presented to realize work point dynamic monitoring by solving the flow and the total pressure of the fan with the model and relative parameters got on the spot.
以模块化建模方法建立了微型燃气轮机的全工况的动态数学模型，并通过流体网络对其进行了求解。
A mathematical dynamic model of micro gas turbines for all operating modes has been established by the modular modeling method and fluid networks used for obtaining solutions.
本文应用全极点模型，提取语音信号的线性预测系数，并推导出其倒谱系数，获得线性预测倒谱差分，用以描述说话人声道的动态变化。
In this paper, we use full pole model to obtain speech signal LPC, then deduce it's LPCC, and we use the LPCC difference to describe speaker's track dynamic movement.
采用全动态dsc研究了双马来酰亚胺树脂(BMI)体系的固化反应动力学，建立了固化动力学的唯象模型。
The cure kinetics of bismaleimides (BMI) resin system was investigated by dynamic DSC analysis and the phenomenological model was established.
通过应用全极点模型，提取语音信号的线性预测系数，并推导出其倒谱系数，获得线性预测倒谱差分，用以描述说话人声道的动态变化。
By using full pole model, we obtained speech signal LPC, then deduced it's LPCC, and we used the LPCC difference to describe speaker's track dynamic movement.
用全动态dsc研究了先进复合材料用高性能双组份环氧树脂的固化反应动力学，获得了固化反应的动力学参数，并建立了固化动力学的唯象模型。
The cure kinetics of a bicomponent high performance epoxy resin was studied by dynamic DSC analysis, and the parameters of the cure reaction were obtained to establish a phenomenological model.
由这若干个小偏差动态模型组合成描述全工作范围动、静态特性的发动机模型。
These segments assembled the engine model with property of dynamic and static state in the whole operating range.
针对研发的采用一体化布置、全功率自然循环的低温核反应堆电站，建立了一个可用于大功率运行范围控制系统仿真的动态数学模型。
This paper discusses the considerations in the modeling of a new type of nuclear power plant for its control system simulation in a wide power range.
实践证明利用本文思想编制的汽轮机仿真模型能够正确反映仿真对象的全物理过程，具有良好的静态精度和动态响应特性。
The fact is proved that the steam turbine model is able to exactly simulate the working process and the dynamic characteristic of the simulated object, the static characteristic is very precise.
以马尔可夫理论为基础，运用全概率公式建立了飞机对地攻击的动态模型。
Based on Markov stochastic process theory, a transfer matrix model of air-to-ground strike is derived with the formula of full probability.
在同时考虑产品成本价值和全寿命期失效损失期望前提下，提出了以动态可靠度为控制参数的全寿命优化设计模型。
In consideration of cost and whole life loss expectation of product, the whole life optimization design model with control parameter of dynamic reliability is proposed.
以某型飞机环境控制系统为例，利用该模型库构建了环控系统完整的全流量仿真模型，并给出稳态计算结果和动态响应分析。
The example of ACES full simulation model is spliced using the simulation model library and steady simulation result and dynamic process analysis is given in this paper.
主要研究内容分为全流程动态数学模型建立、常压塔产品质量模型建立、仿真培训系统开发三部分。
The main work can be summarized as follows: modeling of the whole process, method of establishing product quality model, and developing the training system.
实验结果表明：所建立的苏制5 0 0MW超临界压力直流锅炉全工况的实时仿真数学模型具有良好的动态特性。
The experiments show that the full scope real time simulation mathematical model of Russia made 500MW units supercritical once through boiler has excellent dynamic characteristics.
利用建立的三维tIG焊接熔池瞬时行为数值分析模型，对移动热源作用下不锈钢薄板全熔透时熔池动态行为进行了数值分析。
A 3-d transient numerical model for TIG welding stainless steel has been developed to simulate full-penetrated weld pool dynamic behavior.
同时还对经济损失的全概率模型和动态修正模型进行一番阐述。
Meantime, the total probability model and dynamic correct model are introduced.
通过求解全机纵向运动状态方程，分析了全机模型带与不带机翼边条时纵向动态响应问题。
Aircraft longitudinal dynamic response of the system with and without LEX is analyzed by solving the state equation of aircraft longitudinal motion.
研究了工艺信息标识及全三维标注方法、动态工艺模型构建、全三维工艺模型可视化发布以及工艺流程在线触发和控制关键技术。
The key technology that full 3Dannotation of process information, dynamic process model constitution, 3Dvisual release of process model and on-line control of process flow are researched.
研究了工艺信息标识及全三维标注方法、动态工艺模型构建、全三维工艺模型可视化发布以及工艺流程在线触发和控制关键技术。
The key technology that full 3Dannotation of process information, dynamic process model constitution, 3Dvisual release of process model and on-line control of process flow are researched.
应用推荐