而扭角的测量则采用光电编码器。
光电眼和光电编码器进行偏差检测。
Photoelectric detector and photoelectric encoder carry on the deviation to measure.
我们解决了光电编码器配套部件的难题。
用光电编码器实现了大质量进给滑台的位置检测；
This can detect the position of platform feed with great inertial-mass through photoelectrical encoder, the vibration magnitude of translation worktable with eddy transducer.
在此基础上开展了高精度复合式光电编码器的设计。
On this basis, we carry out a high-precision composite optical shaft encoder design.
本文对光电编码器的轴系结构及外部连接问题进行了讨论。
Shafting Construction and external Couple of photoelectric encoder are discussed in this paper.
介绍了光电编码器脉冲四倍频电路及与计算机的脉冲接口。
The photoelectric encoder quadruple circuit and its pulse interface with computer are presented.
重铁证明北极星HSD44系列光电编码器被设计成一个生还者。
The heavy rail proven NorthStar HSD44 series optical encoder was designed to be a survivor.
位置回路采用光电编码器作为反馈元件，完成对目标的搜索、跟踪。
The position loop use optical encoder as the feedback element. It is used to search and track the target.
绝对的ACURO AI25工业光电编码器在一个单圈或多可转版。
The ACURO AI25 absolute industrial optical encoder is available in a single-turn or multi-turn version.
《角度测量器》用光电编码器测量角度，每个脉冲为 0.72度。
" Angle measuring device" with the optical encoder measuring the angle of each pulse is 0.72 degrees.
该系统的速度反馈元件采用测速发电机，角度测量元件采用光电编码器。
Measuring generator is used for velocity feedback in this system, and photoelectricity coding component is used for Angle measure.
对于光电编码器信号的采集计数和控制，通常采用专用的计数模板来实现。
The special counter modules are used to realize acquisition counter and control the signal of photoelectricity encoder.
增量式光电编码器能够适应井下多粉尘、强噪声的恶劣环境，并且安装方便。
The incremental photoelectric encoder is fit for the environment full of powder and dust and strong noise. Also, it can be fixed expediently.
分析了光电编码器的振动机理及影响，设计了用单片机进行控制的减振电路。
The paper analyzes the shock mechanism and affect of optical encoder. The shock absorption circuit for optical encoder using microprocessor is designed.
采用增量式光电编码器和可编程序控制器的全新设计，较好地解决了这一问题。
The new design with incremental encoder and Programmable Logical Controller works out a solution.
详细论述了基于光电编码器的高精度的数字测速方法，及其在转台伺服系统中的实现。
High Accuracy digital speed measurement methods based on optical encoder were discussed in detail. Then it introduces the realization of this methods in the servo system.
在传统的运动控制系统中，通常采用光电编码器或旋转变压器来检测转子的位置和速度。
In conventional motion control systems, optical encoders or electromagnetic resolvers are used for this purpose.
在传统的运动控制系统中，通常采用光电编码器或旋转变压器来检测转子的位置和速度。
In conventional motion control systems, photoelectric encoders or rotary transformers are used for this purpose.
该系统由数字控制器、脉宽调制波形显示电路、全桥变换器、直流电动机和光电编码器。
The system consists of a digital control system, a PWM control waveform display, a full-bridge converter, a DC motor and load motor.
探讨了PC的串行接口用于光电编码器的脉冲计数和伺服电机控制两种非通信功能的应用。
The COM of IBM-PC applications for the counter of Opt-encoder pulse and the controller of AC -Servo are study in this paper.
介绍了采用CAN总线数据传输方式的系统中，光电编码器CAN总线接口的设计与应用。
Photoelectric encoder CAN bus interface is put forward in order to make photoelectric encoder used in the system which adopts CAN bus as data transmission method.
应用光电编码器作为滚珠丝杠转角位置检测元件实现了半闭环补偿控制，提高了系统的精度。
The photoelectric encoder is used for measuring the angular position of rotating ballscrew. Semi closed loop compensation control is realized and system accuracy is improved.
文中详细的介绍了LPC 2214微处理器与光电编码器的接口电路设计和具体的软件实现。
The article details the LPC2214 microprocessors and optical encoder interface circuit design and specific software.
采用光电编码器、高速计数模板、PLC程序控制方案实现钢板的定位剪切，提高了中板成材率。
By using encoder, high speed counter module and PLC sequencing control in steel plate positioning shearing, medium plate yield have been increased.
采用微处理器、专用的运动控制和驱动芯片以及光电编码器实现了机器人关节的伺服闭环运动控制；
Microprocessor, dedicated motion controller and driver, optical electronic encoder were used to realize servo closed-loop motion control.
常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
Commonly used servo motor is ac servo motor, the motor shaft with in the photoelectric encoder, by detecting the rotor Angle to frequency conversion control.
目前常用的伺服电机是交流伺服电机，在电机的轴端装有光电编码器，通过检测转子角度用以变频控制。
Now commonly used servo motor is ac servo motor, the axial end in motor with photoelectric encoder, by examining the rotor Angle to frequency conversion control.
本设计从数字农业精准生产技术平台生产实际要求出发，设计了测量轮式光电编码器测取位移量的方法。
The research designs the measurement using increment photoelectric encoder based on the practice of the digital agriculture platform producing.
本设计从数字农业精准生产技术平台生产实际要求出发，设计了测量轮式光电编码器测取位移量的方法。
The research designs the measurement using increment photoelectric encoder based on the practice of the digital agriculture platform producing.
应用推荐