在和斯坦福大学的Burney团队合作中，太阳能光电基金会设计了一个随机、单变量的工程，以便于进行细致的研究与分析。
In partnering with Burney's group at Stanford, SELF set out to design randomized, single-test treatment projects that could be rigorously studied and analyzed.
一旦你创造了一种新型的光源，不论是医学成像或者是实验室的光谱分析再到光电池都将受益匪浅。
When you create a whole new kind of light, everything from medical imaging and laboratory spectroscopy to photovoltaics could stand to benefit.
本文将讨论微型CMOS电视摄像机作为图像传感器在实时光电位移测量时的处理电路及性能分析。
This paper discusses the processing circuit and features of the CMOS miniature camera used as a graphic sensor in the real time photoelectric displacement measurement.
设计了一种用于混合式光电电流互感器(HOCT)的电流传感头。分析了其测量误差，给出解决的方法。
A sensor head for hybrid optical current transformer (HOCT) is designed, the error resource of it is analyzed, and the overcoming method is given.
半导体光电薄膜的分析和检测是器件开发中必须首先要解决的重要问题之一。
The subject of analysis and inspection of semiconductor optoelectronic film is one of the most important problems for device development.
理论分析及实验表明，采用CCD为光电转换元件的非接触测量厚度法是可行的。
Principle analysis and experiment result indicate that the non-contact thickness measurement method using CCD as photoelectric transformation element is feasible.
分析气体粘滞性阻力和光电计时器所引起的系统误差的因素，以及修正这误差的建议。
This paper analysised factors of system error by gas viscous resistance and photoelectric timer, and suggested to amend it.
通过对光电雷达电子部件所有关键信号的实验测试和部件故障树结构分析，阐述了光电雷达电子部件性能检测和故障诊断的实现过程。
The fault diagnosis and property testing process of the electronic component of photovoltaic radar base on the testing of all important signal and analysis of fault trees are detailed introduced.
介绍了用美国DV - 4光电光谱仪分析502铝合金的试验研究过程和操作方法。
Test and research process and operation method of 502 aluminum alloy analyzed by DV-4 photoelectric spectrometer from American are introduced.
气象学的能见距离是在光电成像系统分析和设计中常用的大气性能评价参量。
Visibility distance, a term commonly used in meteorology for assessing atmospheric performance, is a major parameter in analysis and design of optoelectronic imaging system.
探讨研究有限元分析在光电稳定系统结构设计中的应用。
The application of Finite Element Analysis in mechanical design of stabilized electro-optical system is investigated.
文章分析了天基光电望远镜对空间目标成像时三者的位置关系及其变化对目标光度特征的影响，以及望远镜系统参数对空间目标成像光度特征的影响；
The influence of the relative position and the parameters of the telescope to the luminant characters of space target imaging in space-based telescope were analyzed.
对比分析现有的各种CCD光电响应特性标定方法后，引入了利用小孔夫琅和费衍射标定CCD光电响应的方法。
A new calibration method, pinhole Fraunhofer diffraction method, was introduced after analysing several methods of calibrating CCDs photoelectric characteristics.
针对晶体中光电子涨落的特点，分析了光吸收激发和热激发中影响光电子产生的因素。
Based on the photoelectron character, the factor effecting on the creation of photoelectron was analyzed in light absorption excitation and thermal excitation.
这个结果与X射线光电子能谱（XPS）分析结果是一致的。
These results are consistent with the results of X ray photoelectron spectroscopy (XPS) analysis.
本文探讨了光电探测器的噪声，分析了光电探测器的噪声电压、噪声电流的影响因素，并提出了解决的方法。
The paper investigated the noise of optoelectronic detectors, analyzed the noise Voltage and current in optoelectronic detectors, and discussed a method of reducing the noises.
从破坏机理和损伤阈值方面分析了光电探测器的干扰机理。
The interfering mechanism on the photoelectric detector is analyzed in damage mechanism and jamming threshold.
在对钢样进行光电光谱分析时，其表面情况对分析结果有直接影响。
In photoelectric spectral analysis for a steel sample, the result depends on the condition of sample surface.
利用椭圆偏振光谱、反射谱、红外吸收谱和准稳态光电导（QSSPC）分析了氮化硅薄膜的特性。
The characterization of SiN thin films was studied by spectral ellipsometry, reflection spectra, infrared absorption spectroscopy (IR) and quasi-steady state photoconductance (QSSPC) measurements.
在光电阴极的制备及对光电阴极作表面分析中，铯离子源较中性铯源具有一定的优点。
In the surface analysis and the manufacture of photocathode the cesium ion source shows some advantages as compared with the neutral cesium source.
本文分析了光电式传感器在模拟式工作状态下难于实现高精度测量的原因，提出了通过自校正提高测量精度的方法。
This paper analyses the difficulty of high accuracy measurement of photoelectric sensors working under on-line analogue conditions and proposes a method for the accuracy improvement.
分析新型光电产品的特点，提出以全数检验替代以前光学产品采用抽样检验的方案。
The features of new electro-optic products are analyzed, and a scheme of the total inspection substituted for the sampling inspect ion is proposed.
用x -射线衍射分析与X -射线光电子能谱分析研究了硝酸铕在石墨炉内石墨探针表面原子化机理。
The atomization mechanism of europium nitrate on graphite probe surface in graphite furnace was investigated experimentally by X-ray diffraction spectrometry and X-ray photoelectron spectrometry.
研究分析了光电成像系统观察运动目标时对图像探测特性的影响因素和数学模型；
The effect on the image detecting characteristic while photoelectric imaging system observes moving object is analyzed, and the mathematical model of it is presented.
采用X射线光电子能谱(XPS)对比分析纯氧化锌陶瓷和氧化锌压敏电阻的界面特性。
Analyzed were the characteristics of interface of both ZnO varistor and pure ZnO ceramic by X-ray photoelectron spectroscopy (XPS).
介绍了位置灵敏光电倍增管的内部结构、成像方法和电路，分析了用位置灵敏光电倍增管和闪烁晶体组成的数据采集电路及微机接口的设计。
This paper introduces the internal structure, imaging method and circuit of PSPMT , analyses the circuit of data acquisition with PSPMT and NaI(Tl) and the design of microcomputer interface.
用扫描电子显微镜和X射线光电子能谱仪观察分析了磨损表面形貌和元素化学形态。
Worn surface morphology and element chemistry configuration of steel ball were analyzed by means of X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM).
在选定的分析条件下，对硅钢中的碳、硅进行光电直读光谱分析，较好地满足了生产需求。
In selective analysis condition, carbon and silicon in silicon steel are determined by photoelectric direct reading spectrometers. The result is satisfied the needs of production.
对曝光电子的能量和线条宽度之间的关系进行了分析。
The relation between the electron exposure energy and the line width is analyzed.
对曝光电子的能量和线条宽度之间的关系进行了分析。
The relation between the electron exposure energy and the line width is analyzed.
应用推荐