试探了光电信号的计算机采集和处理的可能性。
The practicability of acquisition and processing of photoelectric signal by computer is explored.
锁相放大器在微弱光电信号检测中有着广泛的应用。
Lock-in amplifiers are used widely in low photoelectric signal detecting.
光电信号通过PLC控制电磁离合制动，实现与主机同步。
Light and electric signal brakes by PLC control power and magnetic clutch to keep pace with the main engine.
微弱光电信号的采集与处理是工业自动化中常见的一个问题。
Weak photoelectric signal acquisition and process is a common issue in industrial automation.
光电信号、陀螺信号数据的采集和陀螺的控制由单片机来完成。
A MCU was used to acquire the photo detector data and the gyroscope signal.
本文详细叙述了电子经纬仪光电信号处理系统的设计和调试的全过程。
The designing and debugging process of the electric theodolite photoelectric signal processing system are presented in detail in this thesis.
因此，对绝对式编码器提取高质量光栅光电信号的方法需作专门研究。
It is thus necessary to carry out a dedicated study on the methods of extracting high quality grating photoelectric signals for the absolute encoders.
本文提出了一种调整编码器码盘安装偏心的新方法：光电信号调偏心。
The paper addresses a new method of adjusting eccentricity, using optoelectronic signal to adjusting encoder eccentricity.
凹坑连续划过入射光束，使探测器接收到的光电信号呈现有规律的变化。
The pits continuously move through incident light, which produces regular photoelectric signal accepted by detector.
利用位置传感的光电信号模型，分析了光学传感器位置测量精度的基本限制。
The basic limit for the position measuring was analyzed with the photoelectric signal model.
同时，已经研制了新的低躁声光电信号放大电路，将用于以后的灵敏度改进。
We also developed a new low-noise photodiode signal amplification circuit to further improve sensitivity.
本文详细描述了某型电子经纬仪光电信号数字处理系统的设计和实现的全过程。
In this paper, the designing and implementing of a certain electronic theodolite optoelectronic signal digital system are presented in detail.
一种新的联网设计通过摒弃这一光电信号转换过程，能使互联网速度提高100倍。
By dispensing with that conversion, a new network design could increase Internet speeds 100-fold.
研究金免疫层析定量智能检测仪器的光电信号检测、数据采集与传输等部分的设计。
To study the detailed designs for the intelligent quantitative test instrument, such as the department of photoelectric signal detection, data collection, data transmission, and so on.
本文介绍一种采集微弱光电信号的方法，通过电路设计、系统仿真，实现了系统验证。
Presents a novel method to acquire weak signals and realizes the system after circuit design and system emulation, which is aimed to detect weak photoelectric signals.
实现陈教授的构想意味着要用无须进行光电信号转换的路由器替换已有的互联网路由器。
Implementing Chan's scheme would mean replacing existing Internet routers with new ones that don't have to convert optical signals to electrical signals.
本文介绍一种采集微弱光电信号的方法，通过电路设计、系统仿真，实现了系统验证。
The system chains three semesters and is composed of four modules, including engineering cognition, specialty experiment, engineering training and systems simulation.
阐述了光电式速度传感器获取光电信号，跟踪滤波输出的随机窄带基波信号、波形预处理及应用。
To obtain photoelectric signal of the photoelectric speed sensor, tracking to filtering narrow band random base-wave which is output, voltage wave beforehand transaction and application are expounded.
本文应用光电检测技术原理，设计了一种基于虚拟仪器技术平台的微弱光电信号采集与处理系统。
This paper using the principle of photoelectric detection to designed a weak photoelectric signal acquisition and process system based on virtual instrument technique.
本文分析了时域平均法对光电信号进行滤波处理在激光绝对法校准振动传感器相频特性中的应用。
In this paper, the time domain average meth od is used to extract the interfere signal in calibrating the phase character of vibration sensor by laser interferometer.
I/O自我检查功能，可显示系统所有光电信号及单独控制马达运转状况，大大缩短维修时间，降低维修成本。
Self-detection of I/O function and the display of all optical signals and individual control of motor operation to greatly shorten the maintenance time and lower the maintenance costs.
采用同相放大电路成功实现了对微弱调制光电信号的接收，并采取简单但行之有效的方法滤除了偏置电压引入的噪声干扰；
The laser beam modulation frequency has been increased to achieve better accuracy. The circuit has been designed in a simple manner to reduce unexpected error and debugging complexity.
摘要 ：采用直接光强调制的方法，建立了一种新型有机电致发光器件（OLED）的光电信号传输体系，研究了发光层掺杂、发光面积和预置电压对OLED响应速度的影响。
Abstract : A new type of optical signal transmission system based on organic light-emitting devices (OLED) has been investigated using direct light intensity modulation method.
该公司的研究人员应用的原理是，当可见光照到光电二极管时可以产生电信号(在数码相机中研发了该项技术)。
Its researchers used photodiodes (the technology found in digital cameras) that generate an electrical signal when light strikes them.
就其本身来说，IBM已经使用硅来研发一种超薄快速型光电探测器来讲光信号转换成电信号。
For its part, IBM has used silicon to develop a fast and extremely thin photodetector to convert optical signals into electrical ones.
该公司的研究人员应用的原理是，当可见光照到光电二极管时可以产生电信号(在数码相机中研发了该项技术)。
Its researchers used photodiodes (the technology found in digital cameras) that generate an electrical signal when light strikes the m.
微型光谱仪通常采用光电探测器阵列作为光谱信号获取元件，将光谱信号转化为电信号。
Micro spectrometer generally takes the SSPA (self scanned photodiode array) as sensor to turn the spectrum signal into a form of electrical signal.
光电滑觉传感器是利用光电效应原理，将机械的滑动通过光信号转换为电信号加以检测。
On the basis of photoelectric effect, photoelectric slippage sensor converts the mechanical slippage into electric signal through optical signal in order to detect.
光电滑觉传感器是利用光电效应原理，将机械的滑动通过光信号转换为电信号加以检测。
On the basis of photoelectric effect, photoelectric slippage sensor converts the mechanical slippage into electric signal through optical signal in order to detect.
应用推荐