阴影帮我们理解光从哪里来，有多少个光源和每个光源的强度。
Shadows help us understand where the light is coming from, how many light sources there are and the intensity of each.
C街道距光源的距离是A街的3倍，那么光线的昏暗程度将是A街的9倍，因为3X3 = 9，也就是说C街的光照强度只等于A街的1/9，如果这里要看清书上的字，字体就要扩大九倍。
" C " street is three times as far from the light as "A" street; hence it will be nine times darker there, for 3X3 = 9.
同时，确使你的屏幕对任何光源都保持90度角来减少光的强度。
Also, make sure that your screen is at a 90-degree Angle to any light source to cut down on glare.
如果一个光源照亮某一个地方，这个地方距离光源越远，光照强度会越弱，但是光照强度并不是与光源距离等比例地减弱，就是说，距离延长两倍，光照强度并不是减弱两倍，而是减弱两倍的两倍，等于减弱四倍；
If a light illuminates a certain space, its intensity at twice the distance is not twice as feeble, but two times two, equal four times, as feeble.
有些汽车装备了高强度放电前大灯hid，该设备通过其预先设计的电子系统产生的高压电弧放电生成高密度光源。
Some cars equipped with high strength discharge headlights HID, the device through its pre designed electrical system generated high voltage arc discharge generated high density light source.
从而，我们开始适应使用灯具作为我们餐厅的主要光源，这样一来，光照的强度能够很容易地进行调整。
Consequently, we adapt to use lamps as the main lighting source of the restaurant so the intensity of light can easily be adjusted.
在正向渲染中，光源本身也会根据他们的设置和强度受到不同的对待。
Lights themselves are also treated differently by Forward Rendering, depending on their Settings and intensity.
采用一种有效利用白光光源强度的简易实验装置。
A simply-built experimental installation, which is able to use effectually the intensity of white-light source, is adopted.
确保你设置的强度低于在正前方灯的强度，因为那是我们场景的主光源。
Make sure you set the intensity a bit lower then the front omni though, since that will be our primary light source!
织物紫外线透过率测试仪是衡量织物抗紫外线能力的仪器，氘灯作为优选的紫外光源，其辐射强度的稳定密切关系到测量的精度和一致性。
The deuterium lamp is often used as ultraviolet ray lamp in UV measuring instrument, the measuring accuracy of the instrument has close correlation with the stability of radiation energy.
分析了光源强度噪声对光纤陀螺极限灵敏度的影响。
The influence of light source intensity noise on FOG limited sensitivity is analyzed.
短弧氙灯是一种发光强度高，具有从紫外到红外的连续光谱的点光源。
The short arc Xenon lamp is a sort of point source having very high luminous intensity and a continuous spectrum from ultraviolet to IR.
在室内冷色光源下，增加光的柔和度，补充室内红光强度。使原来普通透视镜没法透视的牌也能看清楚。
In the indoor cool light, increase light softness, supplementary interior red intensity. The original ordinary microscope can't perspective card can be clearly seen.
激光出现以后，人们获得了高强度、高单色性的相干光源，在许多实际问题中，将遇到繁杂的菲涅耳衍射的计算。
Since laser appeared, pure monochromatic coherent light sources of high intensity have been achieved. In many practical problems, there are miscellaneous Fresnel's diffraction calculations.
采用场发射阴极的X射线光源具有体积小，辐射强度高，频率响应快，可以随时开启，无需预热的优点。
Using field emission cathode, X ray source can be made with several advantages: smaller volume and brighter, high frequency response, in-time turning on, etc.
高亮度的辐照热光源一定程度上限制了基于经典热光场的强度关联量子成像技术的实验研究和广泛应用。
The intensity correlated quantum imaging experiment and application with thermal light restricted by the high bright thermal light to some extent.
准分子激光作为当前光刻装置的主要光源，要求其输出激光光束强度分布尽量均匀。
The excimer laser as the main light source of photolithographic device, whose energy distribution is required as homogeneous as possible.
可靠的定位结构及特制高强度长寿命光源，无需维护，确保仪器能长时间稳定工作。
Of reliable positioning structure and special high strength long-life light source, no need of maintenance, to ensure that the equipment can work stably for a long time.
烛光：光源发光强度的单位。
强度法是干涉型传感器采用的最古老、最简单的方法，它采用单色激光光源作为系统的光源。
The intensity modulation method is the oldest and simplest method for fiber-optic sensor, in which a homochromatic laser is used as system light source.
在强度调制型光纤传感器中，光源发光强度和光电接收器工作的稳定性，是决定测量精度的关键因素。
In intensity-modulated type optic fiber sensors, luminous intensity of a light source and operating stability of photoelectric receiver are the key factors for determining measuring accuracy.
从各光源发出的光的强度与该光源的距离的平方成反比。
The intensity of light from any source varies inversely as the square of the distance from the source.
扫频激光光源提供了足量的光照强度，可以轻松测取低api度原油的参数。
The swept source laser provides light intensity strong enough to easily measure even the lowest API gravity crudes.
烛光：光源发光强度的单位。
同时为解决脉冲氙灯光源强度不一致的问题，采用了双光电路同步并行触发工作的结构。
To solve the problem that the pulsed xenon lamp has the inconsistent intensity, the instrument USES a double-circuit with synchronous parallel triggered structure.
作为一种高效、长寿命的新型电光源高强度气体放电灯在绿色照明工程中扮演了重要的角色。
Being part of it, green lighting projects are attracting more and more attention. As a high efficacy long life time lighting source, high Intensity Discharge (HID) lamp plays an important role in it.
为了消除光源强度的波动产生的误差，提高实验的精确度，文章介绍了新的设计思想。
This article introduces a new designing idea for eliminating the error caused by the fluctuation of light source intensity and for improving the precision and accuracy of experiment.
在非功能式强度型光纤传感器中，造成光强变化而导致较大信号误差的主要原因有如下几个方面：（1）光源输出光功率的变化；
For the non-function intensity type fiber optic sensors, the main intensity errors are caused by the variation of (1)source device output optical power;
光的强度简单的说就是从一个光源发出的光的数量。
Intensity of light can simply be defined as the amount of light being emitted from a source of light.
本文基于模糊概率概念，给出了光源发光强度稳定性好或差的可能性的模糊概率估计结果。
Based on the concept of fuzzy probability, this paper gives the results of estimation by fuzzy probability for the possibility of good or bad stability of luminous intensity of the luminaire.
应用推荐