论述了光电色选机光学检测系统的原理及结构设计。
The principle and the structure design of the optical detecting system of the photoelectric colour sorter were described.
针对检测表面贴片产品缺陷的光学检测系统，提出一种三阶段的快速路径规划算法。
A fast three-step path planning algorithm was proposed for automatic optic system to inspect electronic product defects by using surface mount technology.
针对目前自动光学检测系统在进行焊点检测时容易出现缺陷误报和漏报，以及智能化程度不高的问题，提出了一种基于神经网络的检测方法。
In order to overcome the error alarming and unintelligence of the automatic optical inspection(AOI) system for the solder joint inspection, a new inspecting method based on neural network is proposed.
在实践中，量子密匙分配系统需要一套复杂的光学设备，用来传输与检测加载了密匙的极性光子。
In practice, quantum-key-distribution systems rely on sophisticated optical equipment to prepare, transmit and detect the individual polarised photons that make up the key.
根据苹果光学反射特性建立了一套适于苹果坏损自动检测的计算机图像系统。
On the optical reflectance properties of apples a computer image system for automatic detection of defects on apples is built.
此外，人脸检测技术有助于把他们每个人都面临着最好的，而超级平稳摄像光学图像稳定系统有助于确保图像仍然尖锐和正确的。
Additionally, face Detection technology helps everyone put their best face forward, while the Super SteadyShot optical image stabilization system helps ensure images remain sharp and true.
该仪器采用光纤传导技术和全封闭光学系统，具有较高的光谱分辨率和检测灵敏度。
The optical fiber conduction technology and full closed optical system was used in the instrument. The higher spectral resolution and the detective sensitivity were obtained.
介绍一种利用光学方法检测涡轮转速的光纤涡轮流量传感器及检测系统。
The optical fiber turbine flow sensor and detecting system, in which the rotational speed of the turbine is measured with optical technique, are presented.
介绍了反射式共聚焦光学系统的搭建，整个过程分为显微镜光学系统、扫描装置、检测系统、软件控制四个部分。
This article, introduces setting up of reflectance confocal microscope which is divided into four parts:optical system, scanning system, detecting system and software controlling system.
建立了监测应力腐蚀萌生过程的光学系统，介绍了主观散斑方法在应力腐蚀检测过程中的应用。
An optical system has been set up to observe the initial process of stress corrosion, the application of the subjective speckle technique in observation of stress corrosion has been introduced.
本文提出一种新颖的具有光学补偿网络的光纤式浓度检测系统。
In this paper, a novel concentration detective system with optical fiber compensation network is presented.
结果表明，文中提出的波前重建算法和采用的光路系统可用于实际光学元件面形的准确检测，系统的重复性也得到了研究。
The results show that both the wavefront reconstruction algorithm and the optical system are able to exactly test the optics surface. And the repeatability of the setup is analyzed.
为大型光学系统中光学元件损伤的在线、自动化检测提供了一种有用的技术途径。
The image processing method can provide a useful approach for online inspection and automatization inspection of damage in optics.
组合孔径光学系统的关键技术就是它的装调和检测。
The key technology of synthetic aperture optical system is in its alignment and test.
叙述一种用于测试大口径、长焦距光学系统杂光系数、渐晕系数、像面照度均匀性等光学参数的检测方法。
A method is introduced for testing stray light coefficient, vignetting coefficient and image surface uniformity optical system with large aperture and long focal length.
传感器系统采用光纤作为发光菌信号传导介质，使传感器与后面的集成光学检测分析系统相分离，便于现场应用。
The sensor system USES the optical fiber as the transmission medium of bioluminescent bacteria signal, separating the sensor and the optical detecting system, which is convenient for field use.
研究了几种常用的光学检测理论及其实现方法，在此基础上，完成了OMSDS系统结构设计及入射、反射、散射基本光路设计，通过实验验证了入射和反射光路的可行性。
The OMSDS and its basic optical layout are designed with the help of several conventional optical theory used for surface detecting. The experiment indicates that our design is feasible.
根据散射光偏振特点，结合偏振门检测技术，改进了传统的动态光散射光学系统。
According to the polarization characteristics of scattered light, the traditional dynamic light scattering optical system is improved which is combined with polarization-gate detection technology.
重点介绍了光学小波滤波解调法，探讨了其测量系统的原理，并指出该方法可用于微弱信号的检测与处理。
The optical wavelet transform filtering is introduced emphatically, the principle of the measurement system is discussed in depth and its potential applications are pointed out.
光学系统成像链的像质评价是光学检测领域的重要研究课题。
Image-quality evaluation of imaging-link in optical system is an important subject in field of optical detection.
光学中心偏测量在光学系统的检测和装校中具有重要的意义。
The optical measurement of decentration is of great significance to detection, fixing and regulating of an optical system.
基于强激光系统光学元件损伤的在线暗场成像检测，提出了一种无损、自动、快速检测的新算法。
A new algorithm of nondestructive, automatic and high-speed inspection is proposed for dark-field image to be used to inspect online optic component damage on high power laser system.
利用暗场成像原理，研制成功一套应用于大型激光装置的光学元件损伤在线检测装置，并在多程放大系统上进行了实验研究。
An online inspection apparatus of optics damage in large scale laser facility is developed applying dark-field imaging technology. Experiments were carried out on a multi-pass amplifier.
设计的T型光学校准设备可实现柱上荧光检测系统的光学校准；
The optical alignment in on-column fluorescence detection can be effectively carried out by a T-shaped device.
该系统具有测量速度快、检测精度高、实时性强及数据处理自动化等特点，它是近代光学、光电技术与微机技术的有机结合。
The measuring system, possessing advantages of high precision and real time measurement, by using modern optics, opto-electronic technique and microcomputer is also described.
本文介绍一种新的焦面检测方法，以位置敏感探测器PSD作为检焦器件对光学系统的实际焦面进行检测。
A new technique for measuring the accurate position of the focal plane of an optical system with position sensitive detector (PSD) is presented.
介绍了用于检测光学度盘的动态光电显微镜的原理、光学系统、电子学系统及瞄准精度。
In this paper the principle, optical system, electronics system and aiming accuracy of dynamic photoelectric microscope are descriped. which is used for calibrating optical limbs.
设计了基于环路径向剪切干涉检测光学元件面形的光路系统。
The optical system for optics measurement is designed based on this technique.
大口径光学元件的重力变形对元件检测和光学系统性能影响很大。
The Gravity deformation of large aperture optical cell greatly affect the optical surface test and the optical system performance.
大口径光学元件的重力变形对元件检测和光学系统性能影响很大。
The Gravity deformation of large aperture optical cell greatly affect the optical surface test and the optical system performance.
应用推荐