运用光学显微镜研究了电解质对心磷脂聚集形态的影响。
The effects of electrolytes on the assembling structures of cardiolipin were studied by microscopy.
电子显微镜让研究者和临床医生得以进入一个光学显微镜无法窥见的小宇宙。
Electron microscopy grants researchers and clinicians access to a universe that is too small to be detected using light-based microscopes.
普通的光学显微镜并不能帮助研究者观察活体大脑的内部，而这些部位才是记忆形成或者像痴呆和癌症这样的疾病发生的场所。
Standard light microscopes don't allow researchers to look into the interior of the living brain, where memories are formed and diseases such as dementia and cancer can take their toll.
为了实现这样的任务，研究人员已经可以依靠电子显微镜等非光学成像方法进行试验研究了。
In order to perform such tasks, researchers have had to rely on non-optical options like electron microscopy.
用光学、扫描电子显微镜及显微硬度计，研究了低碳钢在高频弯曲疲劳过程中的形变及断裂。
The deformation and fracture of mild steel under high frequency bending fatigue has been studied by optical microscope, scanning electron microscope and microhardness determination.
用末端淬火、光学金相显微镜和透射电镜技术研究7050铝合金热轧板的淬火敏感性。
The quenching sensitivity of 7050 aluminium alloy hot-rolled plate was studied by using end quenching test and optical microscopy (OM) and transmission electron microscopy (TEM).
晶体光学是通过偏光显微镜研究透射光下晶体光学特征的一门科学。
Crystal optics is a subject, which studies optical characteristics of crystal mineral irradiated with transmission light by means of polarization microscope.
基于这一原理，我们研究了一种使用扫描显微镜和微计算机测量光学传递函数的方法。
Based on this principle, a method is described in this paper of measuring OTF of an optical system by means of scanning photometric microscope eyepices.
用光学显微镜和彩色金相技术，研究了真空保温过程中界面的迁移情况及其影响因素。
With the help of optical microscope (OM) and color metallography, the interface migration and its influencing factors were investigated during vacuum holding process.
使用光学和电子显微镜技术研究了纤维在氧化和碳化过程中的形态学结构。
The morphological struture of the rayon fibers during oxidizing and carbonizing process has been examined using optical and electron microscope technique.
毛绒纤维直径是评判此类纤维商业价值重要标准之一，本文主要研究基于光学显微镜自动聚焦的纤维直径测量技术。
In this paper, the measuring method of animal fibers diameter based on auto-focus technology for optical microscope is studied.
光学显微镜被用于研究微小的生物体，因为它们太小，肉眼看不到。
Optical microscopes are used to study organisms too small to see on their own.
利用光学显微镜、扫描电镜、定量金相等技术研究了冷却速度、铅含量、重力作用等对铝铅合金显微组织的影响。
The effects of cooling velocity, the lead content and the gravity on the microstructures of Al Pb alloy were discussed based on the results of optical microscope, SEM and quantitative metallography.
利用光学显微镜、扫描电镜和X射线衍射仪研究了几种不同状态硅砖的晶体形貌和晶格常数。
The crystalline morphology and lattice constants of silica bricks in several status were investigated by the optic microscope, scanning electron microscope and X-ray diffraction.
采用偏光显微镜和光学解偏结晶速率仪研究了嵌段聚醚酯共聚物的结晶形态和等温结晶过程。
The crystallization morphology and isothermal crystallization process were studied by means of polarized microscope and DLI (Depolarized Light Intensity) for poly (ether ester) block copolymers.
通过光学显微镜和扫描电镜观察，研究了盐生植物黑果枸杞叶的形态解剖学特征。
The morphological and anatomical features of leaves of halophytes Lycium ruthenicum were observed and studied using microscope and scanning electron microscope.
该研究小组利用共焦光学显微镜观察纤维，利用动态光散射技术证实了纤维的组装过程，而且利用原子力显微镜技术（AFM）研究了它们的形态。
The research team observed the fibers using confocal light microscopy, confirmed their assembly using dynamic light scattering and studied their morphology using atomic force microscopy (AFM).
采用光学显微镜、扫描电镜研究了沉积高速钢孔隙的大小、形状、分布及显微结构。
The microstructure and porosity of high speed steel (HSS) prepared by spary forming have been studied with optical microscope and scanning electron microscope (SEM).
总结了该技术在近场光学存储、半导体纳米结构研究、固浸显微镜等领域内的应用。
The applications of the solid immersion lens such as near-field optical data storage, semiconductor nanostructures, solid immersion microscope and so on have been summarized.
利用光学显微镜对中碳钢退火孪晶的形态及形成机制进行了研究。
Morphology and forming mechanism of annealing twin in medium carbon steels have been studied with optical microscope.
利用光学显微镜对不同应力路径三轴试验的土样进行孔隙大小及分布的对比研究。
The pore size and distribution of soil in the different stress path tests were studied by the optical microscope.
在光学显微镜和扫描电镜下对短柱茶组9种1变种的花粉进行形态观察和比较研究。
Pollen morphology of 9 species and 1 variety in section Paracamellia was observed and compared by means of light microscope (LM) and scanning electron microscope (SEM).
研究设计：我们研究了大鼠脊索的电子和光学显微镜下改变、嗜中性粒细胞浸润和脂过氧化作用情况，同时还研究了其早期的神经系统检查情况。
Study Design. Electron and light microscopic changes, neutrophil infiltration, and lipid peroxidation in the spinal cord and early neurologic examination were studied in rats.
用光学显微镜和扫描电子显微镜研究了粉末形状、表面形态和包复层、粘接处的显微组织。
Particle shape, surface morphology and microstructure of skin layers and adhering satellites were studied by using optical and scanning electron microscopy.
金相学，金属结构学以金属与合金结构为研究对象的学科，尤指用光学和电子显微镜使用。
The study of the structure of metals and alloys, especially by optical and electron microscopy and X-ray diffraction.
借助于光学显微镜、扫描电镜和EDS能谱分析等方法研究了熔凝层显微组织和溶质浓度分布。
The microstructure and solute concentration distribution of solidified layers is studied by means of optical microscope, SEM and EDS analysis methods.
利用光学显微镜、扫描电子显微镜和电子探针研究了不同保温时间对钢液中非金属夹杂物的形状、成分和尺寸的影响。
The effects of different holding times on the shapes, compositions and sizes of the inclusions were investigated by using optical and scanning electron microscopes and by the electron microprobe.
采用光学显微镜，扫描电子显微镜及X光衍射研究了合金的显微组织、碳化物形态及分布。
The microstructure of the alloy as well as morphology and distribution of carbides were examined by using light microscope, SEM and X-ray diffractometer.
采用SEM、X射线、光学显微镜、显微硬度计等手段研究了高能密度光束表面合金化的机理和工艺。
In this paper the mechanism and process of light beam surface alloying were investigated by SEM, X-ray diffraction, optical microscope, microhardness etc.
采用SEM、X射线、光学显微镜、显微硬度计等手段研究了高能密度光束表面合金化的机理和工艺。
In this paper the mechanism and process of light beam surface alloying were investigated by SEM, X-ray diffraction, optical microscope, microhardness etc.
应用推荐