综述了使用光学方法测量透明体的方法。
In the paper, the methods of optical measurement of transparent object are introduced.
利用光学方法测量了介质阻挡放电中放电丝的时空特性。
The spatiotemporal correlation of filaments is obtained with optical method.
提出了用导波光学方法测量交联型聚合物材料的交联温度。
Guided-wave optics method is used to determine the temperature of the crosslinking polymer films.
本文研究应用光学方法测量在高温下复合材料力学性能的方法和装置。
The optical methods and apparatus for high temperature mechanical behavior measurements of composite material are developed.
采用光学方法测量表面粗糙度具有非接触、无损伤、测量精度高等优点。
Optical methods of measuring surface roughness have many advantages such as non-contact, non-damage and high precision etc.
还研制了用光学方法测量叶栅前后有关水滴尺寸及其分布的一系列辅助装置。
Series of assistant equipments have also been developed for measuring water-droplets sizes and their distributions in front of and behind the test (cascade) by using optics method.
本文论述了应用激光和法拉第磁光效应传感原理，以崭新的光学方法测量磁场。
The paper provides a new method for measuring magnetic field by application of sensing principle of Faraday's magneto-optic effect and laser.
为了探讨用光学方法测量电力系统中的物理量，根据琼斯矩阵法推出了电光效应与磁光效应组合光调制的公式。
With the method of Jones matrix, formulas for intensity of transmitted light through the optical analyzer of various composition of electro-optic effect with magneto-optic effect are derived.
文中讨论了速率偏频激光陀螺在系统中的精确标定方法，指出该方法需要特殊的转台设备，目前尚无法满足，因此提出了一种结合光学方法测量陀螺安装误差角。
This paper discusses the RLG calibration method, and points out that the precise calibration of the rate biased RLG need special equipment that is not available at present.
一种测量非球面光学零件面形的新方法。
A new method of surface shape measurement of aspherical optical components.
光学纤维。第1 - 53部分：测量方法和试验程序。水浸渍。
Optical fibres - Part 1-53: measurement methods and test procedures - Water immersion.
光学纤维。第1-21部分：测量方法和试验程序。涂层几何形状。
Optical fibres - Part 1-21 : measurement methods and test procedures - Coating geometry.
该系统基于光学系统无接触性测量的基本原理，运用光学测量的理论和一般方法，设计并讨论了在实际运用中存在的问题及解决办法；
It based on the basic principle of un-touched measurement in this optics system, applies general theory and methods of optics, the problems and the solutions for practical application are discussed.
在较高精度面形测量的光学方法中，很多测量范围都受到光波波长的限制。
The ranges of most optical methods which are used in high precision surface profiling, are limited by the wavelength of light.
光学玻璃的色散特性测量及近似计算方法的讨论。
Dispersion measurement of optical glass and discussion of the approximate calculation method.
本文概述了常用的测定组织中光辐射能流率及组织光学特性参数的测量方法。
We summarized in this article the commonly used measurement methods for light fluence rate and optical properties of tissue.
为达到高精度测量，提出一种可用于自由曲面光学透镜在线光学测量方法。
A new high precision method is proposed to measure free-form optical lenses on line.
介绍了一种测量固体薄膜厚度的光学方法。
An optical method was introduced for measuring the thickness of solid thin films.
提出了一种大型桥梁结构截面挠度测量的光学方法。
An optics method for measurement of beam section deflection of major bridge structure is put forward.
本文介绍一种基于光学影像的非接触钢板测量方法。
This paper introduces a non-contacted measurement method of steel plate based on optical image.
基于这一原理，我们研究了一种使用扫描显微镜和微计算机测量光学传递函数的方法。
Based on this principle, a method is described in this paper of measuring OTF of an optical system by means of scanning photometric microscope eyepices.
介绍了利用光学相干层析技术实现光学表面间距测量的方法。
This paper describes the distance measurement of optical surface based on optical coherence tomography.
激光多普勒测速技术(LDA)，是一种流体速度的无接触式光学测量方法。
Laser Doppler Anemometry (LDA) is a non-contact optical method for measuring flow velocity.
采用光学测量方法，不仅能精确测量甲烷气体浓度，而且安全可靠。
The optical measurement method can not only be used to accurately measure the concentration of methane gas, but also be safe and reliable.
本文在详细地分析和比较了现有各种测量原理和技术的前提下，就大尺寸光学测量方法进行了深入系统地研究。
Deep and systematical research on optical methods of large-scale metrology is performed after analysis and comparison of present measuring principles and technologies.
导波光学方法能够用来测量光学薄膜的特征参数，但通常只在单一波长条件下进行。
The guided wave optical method can be applied to measurement of characteristic parameters of optical thin films, but usually can only be carried out under the conditions of single wavelength.
导波光学方法能够用来测量光学薄膜的特征参数，但通常只在单一波长条件下进行。
The guided wave optical method can be applied to measurement of characteristic parameters of optical thin films, but usually can only be carried out under the conditions of single wavelength.
应用推荐