而近年来随着电子技术的普及，电子式已经逐步取代了光学式测角技术。
And in recent years with the popularity of electronic technology, electronic measuring Angle has gradually replaced the optical measuring Angle.
目前，我国大多数轴承生产厂家在轴承尺寸检测方面还是依靠机械式、光学式等测量仪器，采用抽检方式进行。
Now, most of Chinese bearing factories in dimension measurement for bearing have been mainly dependent on mechanical or optical instruments in sampling inspection way.
本文分析了像移补偿的原理并介绍了国内外较多采用的像移补偿技术，如光学式像移补偿法、机械式像移补偿法、集成像移补偿法、数字式像移补偿法等。
In this paper, the principle of IMC is analyzed and several kinds of IMC technologies used at home and abroad are introduced, such as optical IMC, mechanical IMC, integrate IMC, digital IMC.
此款“眼球式相机”有3.5倍光学变焦功能，图像清晰，价格低廉，只有镍币大小（使用此技术，焦距可更高）。
The "eyeball camera" has a 3.5x optical zoom, takes sharp images, is inexpensive to make and is only the size of a nickel. (A higher zoom is possible with the technology.)
光学显微镜和穿透式电子显微镜要求将材料切成更薄的片，或在仔细观察前将其控制在玻璃下。
Light microscopes and transmission electron microscopes require that materials be sliced thinly, or trapped under glass before being examined.
利用这个软件设计出了光波波段和微波波段的反射式与光波段的透射式计算机光学元件。
With the software we design reflecting computer optical element in light wave band and microwave band, and transmission computer optical element in light wave band.
结论开放式MR结合光学导引系统用于引导椎间盘造影术是可行的、安全的。
Conclusions Open MR scanner with an optical tracking system guidance and monitoring lumbar disc discography is feasible and safety.
气囊式抛光技术是一种新颖的先进抛光工艺方法，能实现光学表面的确定性加工。
Bonnet tool polishing is a novel and advanced polishing method, which can realize quantitative removing of optical surface.
使用一具附有测微器的光学望远镜配合赤道式射电望远镜进行极轴精密调整，不需用精确的度盘和记时设备。
An optical telescope with a micrometer is used to precisely adjust the polar axis of an equatorial radio telescope and any precise dial and clock will not be needed.
根据矩阵光学理论，研究了全反射棱镜式环形激光器(TRPRL)光路的温度效应。
Based on the theory of matrix optics, temperature effect of Ring Laser with the Total Reflection Prisms (TRPRL) is studied.
这一公式将MSC和HFM与光学模型相联系，对核反应给出自洽和一致的描述。
This formula can integrate MSC and HFM with the optical model and can give self-consistent and uniform description for nuclear reaction.
其读写系统使用了飞行式光纤光学头，极大程度地降低了平均寻道时间。
By the use of the fiber optical head, the average access time of the storage system is decreased effectively.
这种自适应光学系统建立在解卷积式自适应光学原理的基础上，结合了波前探测技术和解卷积图像复原技术。
This Adaptive Optics system is based on deconvolution Adaptive Optics theory, which has used the wavefront detecting and image deconvolution restoration technology.
对谐振式集成光学角速率传感器IORS的关键器件之一——大功率、窄线宽光源进行了分析与实验。
A high power, narrow linewidth single frequency laser diode as one of the key elements of Integrated Optical Rotation Sensor (IORS) is studied.
从理论上推导了一般情况下多层样品PTR信号的解析式，分析了光学不透明三层样品。
The general analytical expressions of PTR signal for multilayer samples are derived. The optically opaque three-layer sample is analyzed in details.
以及在该运动台面的相对侧设有单支的绝对式光学尺及两组读头。
The opposite side of the moving surface is provided with a single absolute type optical rule and two groups of read heads.
阐述光学高温计测温原理、灯丝隐灭式光学高温计制作的参数选择以及光学高温计显示温度与实际温度修正方法。
The paper illustrates the principle of optics pyrometer, the making preferences of ones with implicit filament, and as well as the modifying method of its display usage and actual temperature.
介绍了反射式共聚焦光学系统的搭建，整个过程分为显微镜光学系统、扫描装置、检测系统、软件控制四个部分。
This article, introduces setting up of reflectance confocal microscope which is divided into four parts:optical system, scanning system, detecting system and software controlling system.
Atos流动式光学扫描仪基于光栅原理，是逆向工程领域中一种先进的非接触式光学扫描设备。
ATOS flowing optical scanner with the fringe pattern theory is a kind of advanced and non-contacted of equipment in reverse engineering.
对于火炮这样一些设备，则采用机械式刻度盘及光学分划装置加以测量。
For some equipment like artillery, it USES mechanical dials and optical division equipment to measure.
应用非接触式光学测量方法中自动网格法原理，研究了大型滑坡模型试验中的位移测试方法及其分布规律。
The displacement measurement method and distribution character for large-scale landslide model are studied with automatic mesh method, in terms of non-touched optical measurement theory.
针对飞机叶片表面变形量测量要求提出一种非接触式光学测量方法。
This paper presents an untouched optical measuring method in finding out the deformation of an aircraft engine vane.
论述了用于哈特曼波前探测系统的透射式光学扩束器的研制。
The manufacture of transmission optics beam expander used in Hartmann wavefront detection system was introduced.
目的评价开放式MR扫描仪结合光学追踪系统行椎间盘造影术操作方法的可行性及安全性。
Objective To evaluate the feasibility and safety of lumbar disc discography carried out in an open MR scanner with an optical tracking system.
从系统结构、工作原理、软件功能等方面分析了旋转式光学线材测径系统。
The structure, mechanism and software function of a optical rotating bar diameter measurement instrument system (ORBIS) are analyzed.
提出并设计了一种新型光学元件——反射式闪耀光栅楔形平板。
A reflective blazed grating wedge-plate, a new optical element, is proposed and designed.
与传统绝对式光学编码器相比，码盘直径小、光学图案简单，有利于绝对式编码器实现小型化和提高精度。
The serial encoding method can reduce the diameter of the code disk and simplify the optical pattern, in favour of miniaturization and high precision of the absolute encoder.
与传统绝对式光学编码器相比，码盘直径小、光学图案简单，有利于绝对式编码器实现小型化和提高精度。
The serial encoding method can reduce the diameter of the code disk and simplify the optical pattern, in favour of miniaturization and high precision of the absolute encoder.
应用推荐