可见光固化树脂已广泛应用于牙科临床。
The light cure composite has been widely used in dental treatment.
光固化树脂充填后可能出现不同程度的牙髓反应。
The dental pulp reaction will appear in different degree after the light curing composite is filled.
目的评价光固化树脂充填楔状缺损对牙髓的影响。
Objective Evaluation of light-cured resin filling wedge-shaped defects on the impact of pulp.
光固化树脂因其物理及化学性能较好而被广泛应用于临床。
The light curing composite is widely used in clinical medicine as its better physical and chemical properties.
结果表明，光固化树脂修复楔状缺损明显优于玻璃离子水门汀。
Results showed that light curing composite resin was better than glass ionomer in wedge-shaped ditch restoration.
讨论了底漆的选择，以及光固化树脂和单体对面漆性能的影响。
The selection of primer, and the influences of UV-curable resin and monomers on the properties of top coat were discussed.
用光固化树脂直接充填修复的牙齿约30颗，成功率为73％。
The other cases, 30 teeth, were filled with light cured composite resin. The success rate of this group was 73%.
针对激光固化树脂的特殊性能，介绍了一种测试其线收缩率的方法。
According to the resin's special light properties, a method for testing the special line contraction rate of light curable resin was introduced.
在此基础上合成了较好流动性和光固化性能的蓖麻油紫外光固化树脂。
Thus, a UV-curable resin which has good fluidity and curable performance was synthesized by castor oil, TDI…
目的比较玻璃离子和光固化树脂两种材料修复牙体楔状缺损的临床效果。
Residual HEMA released from five hybrid dental materials of composite resin and glass ionomer after curing;
此外还选择市场上的同类产品与光固化树脂锯片进行了加工性能的对比。
Finally a cutting contrast test was preceded between the photopolymer dicing bladeand two kinds of like products.
研究了装炉温度对快速成形用光固化树脂热膨胀特性的影响和型壳制备工艺。
The influence of temperature on thermal expansion of photo-curing resin used for rapid prototype(RP)and the preparation process of the rapid-precision casting ceramic shell were studied.
目的总结螺纹根管钉、光固化树脂核、金属烤瓷全冠修复残根残冠的临床经验。
AimTo evaluate the clinical effect of the restoration using prefabricated screw post, light-cured composite resin core and porcelain-fused-to-metal crown for residue crown and residue root.
上述水性光固化树脂固化膜具有良好的耐水、耐溶剂和耐酸性，但耐强碱性一般。
UV-cured films of the said two kinds of PUA resins have good water resistance, solvent resistance and acid resistance, but strong base resistance thereof is on general level.
该新型可见光固化树脂的开发有望大幅降低乙烯基酯树脂下游企业的成型施工成本。
The new visible light cured resin is hopeful to greatly reduce the fabrication cost of customers using vinyl ester resin.
结论根管治疗后用光固化树脂充填前磨牙的各类洞，牙体的抗折强度优于用银汞充填者。
Conclusion the fracture strength of premolar teeth filled with light curing composite resin was higher than filled with amalgam after root canal therapy.
利用光纤直接曝光固化实验，得到了紫外光固化树脂的临界固化能量和吸收系数两个特征值；
By the experiments of solidification with the UV optical fiber directly, two eigenvalues for UV photopolymer solidification, critical solidification energy and absorption coefficient were calculated.
本文分析了光固化树脂层间结合机理，根据机械结合理论，增加表面粗糙度，增强层间结合强度。
According to the theory of mechanical bonding, layer-to-layer bond strength was improved by making the surface become more roughness.
一种新颖的3d印刷技术暂停光固化树脂胶状介质，而不是在构建过程中使用传统的结构支撑材料。
A novel 3d printing technique suspends light-curing resin in a gelatinous medium rather than using conventional structural support material during the build process.
彩色光阻剂的主要成分包括：碱可溶性树脂、光固化树脂、颜料、光引发剂、有机溶剂以及添加剂。
The photo resist consists of binder polymer which makes the photopolymer alkaline soluble, multi-functional monomers, pigments, photo initiators and solvents.
成功制备了适用于激光快速成型这一先进制造技术的丙烯酸类光固化树脂，其应用获得了满意的结果。
Prepared successfully acrylates photocurable resin used for the advanced manufacturing technique-laser rapid prototyping, and it's application gained satisfied result.
方法87例残根残冠经过完善的根管治疗后，用螺纹根管钉、光固化树脂核、金属烤瓷全冠进行修复。
Methods87 cases were treated with routine post-and-core PFM crowns after root canal therapy respectively.
而它是以光固化树脂为分散剂，以机器上的LED-UV光能照射，引起化学反应使树脂固化成膜。
And it is a light curing resin as dispersant, the LED on the machine - UV light irradiation, resin curing film caused by chemical reaction.
利用插层聚合合成了环氧丙烯酸酯/蒙脱土复合光固化树脂，并采用紫外光固化制备了环氧丙烯酸酯/蒙脱土纳米复合材料。
The ultraviolet-cured epoxy-acrylate/montmorillonite(EA/MMT) hybrid was synthesized by intercalation polymerization, and prepared into a novel nanocomposite material via UV-curing process.
利用插层聚合合成了环氧丙烯酸酯/蒙脱土复合光固化树脂，并采用紫外光固化制备了环氧丙烯酸酯/蒙脱土纳米复合材料。
The ultraviolet-cured epoxy-acrylate/montmorillonite(EA/MMT) hybrid was synthesized by intercalation polymerization, and prepared into a novel nanocomposite material via UV-curing process.
应用推荐