皮革经过了很好的消光加工。
减少树脂含量以便于车削和砂光加工。
提出齿轮的表面质量对其使用性能和寿命有着极为重要的影响，并详细论述了脉冲电化学机械齿轮光整工艺，及其加工后的齿轮的表面质量特性。
This paper points out that a gear's surface quality has important influence on its employment performance, and pulse-electrochemical mechanical finishing in gear machining is discussed in detail.
机器采用混合光路设计和单向滑动平台，减小了切割功率受光程远近的影响，增加了切割加工过程中的运动稳定性和可靠性。
We adopt mix optical path and unidirectional sliding table, which minimize the impact of optical path length on laser power, enhance movement stability and reliability during cutting.
极间间隙是对脉冲电化学光整加工具有重要影响的工艺参数，保持极小的极间间隙加工，可以提高工件的表面光泽度以及加工的尺寸精度。
Interelectrode clearance is one of the most important parameter of it, keeping minimal clearance while machining will improve the part's surface gloss and size accuracy.
聚合物基复合材料把无机物的高模量、尺寸稳定性以及光、电等特性与高分子材料的韧性、易加工性、电绝缘性巧妙地结合起来。
Polymer based composites combined the good process property, electrical insulation and toughness of polymer with the properties of inorganic materials, such as high module, good dimension stability.
磁性研磨是一种利用磁场中的磁性磨料对具有相对运动的工件表面进行光整加工的新技术。
The magnetic abrasive finishing is a new technology used to process the surface of work piece by the relative motion with magnetic abrasive in the magnetic field.
对脉冲电化学光整加工（PEFM ）中所采用的一种电解液的伏安特性进行了实验研究。
The volt ampere properties of electrolyte in pulse electrochemical finish machining (PEFM) are investigated in this paper.
在分析研究脉冲电化学光整加工原理的基础之上，结合实际进行了实验设计。
Based on analyzing the mechanism of pulse electrochemical finish machining, a practical experiment is designed.
近来，为了适应环保要求，用于表面加工的光油正逐步从溶剂型光油向水性光油转化。
Recently, in order to adapt to the demands of environmental protection, for surface finishing of varnish is progressively from solvent-based light oil to water-based conversion varnish.
滚压是大深缸孔光整加工方法之一。
Rolling is one of the methods for finishing big diameter deep cylinder-hole.
本文对曲面数字化仿形磁粒光整加工系统的原理、功能和软、硬件等一些关键技术进行了论述。
The principle, functions and design about the machine tool and control system were described in this paper.
阐述了脉冲电化学光整加工原理。
The principle of pulse electrochemical finish machining (PECFM) is discussed.
由于目前的加工方法主要是机械光整加工，存在着加工质量差、生产率低、成本高的问题。
Mechanical Finish Machining has the question of low productivity and high cost. Therefore, it can't satisfy the practical production.
我想买激光机加工光塑料，请给我你们机器加工时的视频。
I want to get laser process plastic, and please send us the video of machining operation.
在本文中，提出了一种新型的光整加工方法—电化学机械复合光整加工(ECEF)，并详细的论述了其加工原理。
In this paper, a new finishing machining method - Electrochemical Mechanical finishing (ECEF) is put forward, and the mechanism of ECEF is explained in detail.
在上述研究的基础上，结合螺旋锥齿轮的精切齿原理及特点，探讨了脉冲电化学光整加工在螺旋锥齿轮上的应用模式。
It is discussed the application mode of PECF on the spiral bevel gear based on the research above and the principle and characteristic of precision cutting of spiral bevel gear.
根据实验得到的优选数据进行加工，有效地降低了表面粗糙度3 ~5级，达到了光整加工目的。
The goal of finish machining is achieved and surface roughness is reduced 3 ~ 5 grades based on experimental data.
提出了冻结的光弹性模型条纹经切削加工后的稳定性的概念。
Thus they advance the concept of stability of the frozen photoelastic model streaks after sliced.
高频脉冲电流加工及光整加工技术能提高零件的加工精度和表面质量。
High frequency pulse current machining and fine finishing can improve parts' machining accuracy and surface quality.
同时经过大量的实验验证，光整加工设备对降低曲轴表面粗糙度、提高表面显微硬度和清洁度能够起到很好的效果。
A great deal of tests show that the finishing equipment has a very good effect on reducing crank's surface roughness, increasing its microhardness and cleanliness.
旋转阴极展成电解加工主要用于型面的光整加工，其最终加工间隙决定了型面精度。
The ECCEM (Electrochemical Contour Evolution Machining) is mainly used for finishing surface, the final gap determines the final surface precision.
研究表明，主轴行星式滚磨加工方法可以完成对曲轴类零件的光整加工，同时为此种加工方法的实际应用提供了参数依。
The research result shows that SPBF can be applied to the surface finishing of crank parts, and provides a parameter reference for application of this technology.
为了满足螺旋锥齿轮等大型零件的脉冲电化学光整加工的要求，设计了高频、窄脉宽、大电流的脉冲电源。
To meet with the requirement of PECF finishing, pulse power source with high frequency, narrow pulse width and high current is designed.
针对当前曲轴加工过程中存在的表面质量差、清洁度不高等问题，指出了开发研制新型光整加工设备的必要性，并简要介绍了其工作原理。
Aiming at the problems about surface quality and cleanliness of cranks, the necessity of exploiting new finishing equipment is put forward and of which the principle is introduced.
采用四轴联动数控铣床及自行设计的指状铣刀和数控程序，对膨胀机叶轮进行光整加工。
Four shafts linkage NC milling machine is used for polishing impeller of an expending machine, which finger - like milling cutter and NC system is designed.
磨料水射流复合电解光整加工是在磨料水射流作用的基础上复合电解加工。
The process of abrasive water jet (AWJ) compound with electrolytic machine is based on AWJ.
论述脉冲电化学光整加工特点，研究脉冲电化学光整加工机理，根据光整加工原理进行实验设计。
Based on the characteristics about pulse electrochemical finish machining (PEFM), its mechanism is studied. According to finish machining principles the experimental design is carried out.
通过界面双电层电容值的变化来解释脉冲电化学光整加工提高精度的根本原因；
The reason for the improvement of precision by the EP is the change of double layer capacity value.
通过界面双电层电容值的变化来解释脉冲电化学光整加工提高精度的根本原因；
The reason for the improvement of precision by the EP is the change of double layer capacity value.
应用推荐