本文对晶体二极管引线光亮电镀锡的可焊性进行了研究。
This article conducts a research on the weldability of crystal diode lead wire luminous electrotinning.
光亮电镀：在适当条件下，从镀槽中直接得到具有光泽镀层的电镀。
Light plating: in the right conditions, can be obtained directly from the plating slot have burnish of plating coating.
合成了一种新型氯化钠镀锌的主光亮剂。电镀实验结果表明，在较大的电流密度范围内有较好的电镀效果。
The new main brightener was synthesized. The electroplating experimental results showed it had a fine effect in the wider range of cureet density.
铝材灯饰零件对镀层光亮度和结合力有着比较高的要求，采用电镀加工方法废品率高。
The excellent brightness and cohesion of the plating layer are needed for aluminium lamp finishing parts.
硫酸盐光亮镀锡工艺具有电流效率高、沉积速度快、成本低及废水易处理等优点，在电镀生产中已广泛应用。
Sulfate tin plating process has been widely used in electroplating industry for its strengths such as high current efficiency, fast plating rate, low cost and easy effluent disposal.
通过电化学方法的测试，结果表明该光亮剂的作用机理符合电镀添加剂的经典理论。
The testing results show that the properties and brightening mechanism of the brightener agree with the classical theories of electroplating additives.
为了获得电镀的最佳结果，在生产中对珍珠镍、光亮镍、酸性铜和黄铜四种镀液的成分参数进行了统计分析。
The component data of pearl nickel, bright nickel, acidic copper and brass plating solution in production were analyzed when the best result of the plating deposit obtained.
本文论述电镀光亮镍组合添加剂的设计以及BH- 931电镀光亮镍工艺在摩托车零件上应用的结果。
Design of combination additive for bright nickel plating is described here and the application result of BH-931 bright nickel plating process on motorcycle parts is reported.
光亮酸性镀铜在现代电镀中占有重要的地位，其关键在于光亮刑的选择和应用。
Bright acid copper facing occupies the important position in electroplating modernly, its key lies in choice and application of the bright pharmaceutical.
研究了一种新型可焊性光亮锡锑合金电镀工艺的镀液配方和电镀操作条件；
A new electroplating technology of solderable bright Sn-Sb alloy of bath components and operating conditions were studied.
结果表明，该光亮剂具有很高的浊点和优越的电镀性能，既适合在高浓度的硫酸盐镀液中进行高速连续电镀，又可用于挂镀和滚镀。
Results show the brightener has high cloud point and excellent properties, it can be used in high concentrated sulfate bath for high speed and continuity Zn - plating, also rack and barrel Zn-plating.
硫酸盐光亮酸性镀铜，由于工艺的某些特殊性，对电镀设备要求很高。
The requirement of equipments for bright acid copper plating with sulfate bath is strict due to the specialties of the process.
经小槽电镀，获得外观致密均匀，似镜面光亮，结合力强，具有优良的可焊性镀层。
A uniform, compact, bright lustre, good adhosive and excellent solderable coating was obtained by the experimental electroplating.
结果表明，脉冲电镀能获得晶粒度细小、致密、光亮、均匀且高硬度的复合镀层。
The results show that the pulse plating can gain a compact, bright and uniform composite coating with fine grain and high h...
结果表明，采用新的电镀方法能避免镀铬层裂纹的产生；并能获得表面平整光亮的镀铬层，降低表面粗糙度。
The results show that the novel method can prevent chromium coating from cracking, gain bright and smooth deposit, and reduce the surface roughness.
随后电镀中性镍、光亮铜、光亮镍及镀金。
Consequently neutral nickel, bright copper, bright nickel and decorative gold plating were applied.
对摩托车零件电镀采用预镀镍-半光亮镍-光亮镍-镍封-装饰铬的组合镀层工艺，能完全符合质量标准要求。
A coating combination of nickel strike, semi-bright and bright nickel, nickel sealing plus decorative chromium is suggested to provide motorcycle parts with the standard quality finish.
研究了一种低氰电镀光亮22K金工艺。
A low cyanide bright 22k gold plating process was investigated.
批发采购电镀助剂-供应666无铅无镍光亮厚白铜锡（电镀助剂）批发…
The lead-free nickel free white and bright nickel substitute plating process…bright nickel substitute tin salt 30g 666 lead-free nickel free white and …
进口工艺真空电镀，保证电镀层在持续高温下，反光率不降低，确保3 - 5年光亮如新。
Imports of technology of vacuum plating, guarantee under the continuous high temperature electroplated layer, reflecting lower rate does not appear to ensure that bright 3-5 years as new.
在铝合金电镀件表面形成镀层厚度均匀，镀层外观光亮，并且能够实现批量生产。
The plating formed on the surface of the aluminum alloy galvanized component has even thickness and glaring appearance, and mass production can be realized.
在铝合金电镀件表面形成镀层厚度均匀，镀层外观光亮，并且能够实现批量生产。
The plating formed on the surface of the aluminum alloy galvanized component has even thickness and glaring appearance, and mass production can be realized.
应用推荐