在硬件电路设计上，防滑控制器采用TMS320F 2812和外围电路构成速度捕获电路，完成滑移率偏差的控制并输出刹车压力信号。
In hardware designing, TMS320F2812 and its peripheral circuit make up the velocity capturing circuit. Anti-skid controller controls slip ratio error and exports braking pressure signal.
该系统采用光电编码器作为速度检测传感器，控制方式采用PID数字控制，控制输出采用PWM数字信号至驱动电路对电机调速。
This system USES photoelectric coder as speed detecting sensor, USES PID digital controller as control method, USES PWM signal as control output to regulate speed.
软件部分主要对曲轴速度信号、凸轮轴基准信号等进行处理计算，输出点火控制信号。
The software mainly processes the rotate speed signal of the crankshaft and camshaft position signal to export ignition control signal.
身体的速度陀螺仪的输出用来消除或从万向分离循环轨道信号的机身机构的议案。
The outputs of the body rate gyros are utilized to remove or decouple the airframe body motion from the gimbal track loop signal.
单通道速度信号输出是标准的配置。
The single speed signal output is the standard configuration.
SDC输出的模拟速度信号VEL还可以作为速度反馈信号以构成火炮伺服系统中的速度回路。
Anolog speed signal VEL from SDC is also taken as speed feedback signal to form speed loop in gun servo system.
在大型构件液压同步提升技术中，采用了计算机输出的脉宽调制信号作为电液比例流量阀的输入电流信号控制液压提升器的速度。
In hydraulic synchronizing lifting technology for oversize structure, computer output PWM signal as the input current of proportional valve is used to control the velocity of hydraulic cylinder.
磁环式检波器是将机械震动的速度信号转换成电压信号输出的一种电磁传感器。
The magnetic loop geophone is a type of electromagnetism sensor which transforms mechanistic liberate into electric signal.
阐述了光电式速度传感器获取光电信号，跟踪滤波输出的随机窄带基波信号、波形预处理及应用。
To obtain photoelectric signal of the photoelectric speed sensor, tracking to filtering narrow band random base-wave which is output, voltage wave beforehand transaction and application are expounded.
研究了分别以电机编码器和速率陀螺输出信号作为速度环反馈时，系统输出的跟踪特性。
The article also studied the tracking quality in which the system has used the motor encoder and the velocity gyro as the velocity loop feedback respectively.
单片机f - V接口装置是用于将6K机车速度传感器输出信号转换为适合于国产ZTL - 3型自动停车装置输入要求的装置。
Single chip processor F-V interface unit is a unit of converting the output signal of speed transducer for 6k locomotive into input signal demanded by domestic ZTL-3 automatic train stop apparatus.
在输液管针头与输液软管之间的液体温度检测器的输出端连接到输液速度控制器的控制信号输入端口。
Output terminal of the liquid temperature detector between the perfusion tube pinhead and transfusion hose tube is connected to the control signal input port of the transfusion speed controller.
将谐振原理应用于硅微机械加速度计中，可以改善后者输出信号的质量，降低检测难度。
If resonant elements are adopted in MEMS accelerometer, the quality of the signal output can be improved, and therefore the detection will be easier.
普通加速度计只能输出单向加速度信号，速度和位移量需要经过后续软件进行积分处理得到。
The conventional accelerometer can only measure the single direction acceleration. To get the velocity and the displacement value, subsequent integrating software is required.
发现对待测自由面速度阶跃，磁探针有两种类型稳定的输出信号，分别对应于不同的速度范围。
It was found that there were two types of signal profiles carres ponding to different velocity ranges.
通过带有触发器特征的放大器将这种调制转换为方波输出信号，该输出信号与旋转速度成正比。
This modulation is converted to a square wave output signal proportional to the rotary speed by an amplifier with trigger characteristics.
以给定转速和实际转速作为输入信号，给定电磁转矩作为输出信号，设计了ADRC速度调节器，提高系统的抗干扰能力。
The ADRC speed regulator is designed with the given speed and real speed as inputs and the given electromagnetic torque as output to improve the anti-interference ability of system.
所述电子锁开关的各个输出端还分别与速度控制器上对应的控制信号端连接。
The output ends of the electronic lock switch are further connected with the control signal ends corresponding to the speed controller.
利用空间矢量分解理论分析了陀螺输出角速度信号的投影关系及电机控制信号的分配；
The relationships between gyro output angular velocities and the distribution of motor control signals are analyzed by means of the space vector decomposition theory.
针对汽车悬架测试台的基本结构和受力过程，设计了高精度力传感器和速度传感器输出信号的调理模块。
The system structure, functions and design principles of a VXI bus based signal conditioning system and signal conditioning module are introduced.
利用一只重力加速度计和自行研制的MEMS陀螺作为敏感部件，利用MSC1214对两路信号处理，输出旋转弹的滚动、俯仰和偏航的角速率。
The sensor consists of a MEMS gyroscope, an accelerometer and microprocessor (MSC1214) and can output the rolling, pitch and yaw angular rate of rolling airframe missile.
利用一只重力加速度计和自行研制的MEMS陀螺作为敏感部件，利用MSC1214对两路信号处理，输出旋转弹的滚动、俯仰和偏航的角速率。
The sensor consists of a MEMS gyroscope, an accelerometer and microprocessor (MSC1214) and can output the rolling, pitch and yaw angular rate of rolling airframe missile.
应用推荐