可以使用箝位电路替代Schmitt触发器净化高频输入脉冲。正反馈放大器是信号级脉冲…
You can use a clamping circuit instead of a Schmitt trigger to clean up…
有不同的信号量类：区分优先级，随着程序大小的增长根据活动进行特殊处理(例如，fifo次序，使用多个读进程)。
Have different kinds of semaphore classes: prioritization, specialization based on activity (for example, FIFO ordering, taking advantage of multiple readers) as the program increases in size.
当团队感到压力，不得不以任何事为代价来“制造数字”时，那就是他们仍处于CMM第一级的信号。
When teams feel pressured to "make their Numbers" at all costs, that is a signal that they are still working at CMM Level 1.
如果控制器向设备发送了suspend信号，那么这个事件以最高优先级得到处理。
If the controller has sent a suspend signal to the device, this event gets processed with the highest priority.
预警系统分2个级别，红色信号属I级，表示细菌性食物中毒概率大于25%，黄色信号属II级，表示中毒概率为15% - 25%。
A red alert will mean a 25% or more risk of bacterial food poisoning, while a yellow alert will warn of a 15%-24% possibility.
直流毫伏表是针对毫伏级微小信号的精确测量，应用于实验检测、生产检测及维修使用等。
DC millivolt millivolt level table for the accurate measurement of small signals, Used in experimental testing, production testing and maintenance of the use of.
采用TLC320AC01音频级模拟接口芯片实现了DSP与模拟信号的接口。
TLC320AC01 is used to realize the interface of DSP and analog signals.
检查轮胎压力，石油级、照明头灯、制动灯、信号转开始前发动机。
Check the tire pressure, oil level, and lighting of headlights, brake lights, and turn signals before starting the engine.
传感器的安装位置尽量远离大功率设备，因为它本身的输出信号就比较弱，通常为毫伏级，极易受到干扰。
Sensor is installed as far away from high-power devices, because its own output signal is relatively weak, typically millivolts, vulnerable to interference.
与一些音量控制置于输入端的电路不同，这个前级放大器的特征噪声能够随同信号一起衰减。
Any noise characteristic of the preamp circuit is attenuated along with the signal, unlike circuits where the volume control is before the input.
实验结果证明，该系统稳定可靠，对压力容器的应力及其它微伏级电压信号的自动测试具有推广借鉴价值。
The results show that the system is reliable, and it can be widely used in the fields of vessel pressure test and auto test of micro-scale voltage.
该转换器的高输入阻抗和低失调电压漂移输入增益级可以保证芯片在微弱电压信号下正常工作。
The designed converter could operate well with a slender supply voltage signal because of its high input resistance and low offset drift.
研究还表明SD的特点是一种缓慢波动的毫伏级信号。
The research also indicates that SD is millivolt voltage signal with slow variation.
但在本论文中磁开关作为后级调整器却只是用于对PWM信号的处理，其损耗几乎可以忽略。
But this article shows you it rarely has power loss when it works in the proposed PWM signal post-regulator.
为了提高前置级的共模抑制能力，采用了共模信号的抑制电路—右腿驱动和浮地跟踪。
The design adopts the circuit for constraining the in-phase signal, in order to improve the system's CMRR.
在低阻电路上往往会出现毫伏级的杂散信号，大多数是由于热电效应引起的。
Spurious microvolt level signals are often present in low resistance circuits, most often as a result of thermoelectric effects.
利用IBIS模型进行板级信号完整性分析是一种简单、易用的分析方法。
Board level signal integrity analysis using IBIS model is a kind of simple and easy method.
在交流信号被解调成直流输出时，分布电容易引起输出级自激。
When AC signal of microsyn output was demodulated to DC output, distribution capacitance may cause DC output self excitation.
该方法还具有幅度检测门限值低的特点，可对幅度为10 - 3级以下的信号进行检测。
This method also has characteristic of low amplitude detection threshold, it can detect weak signals with amplitude value smaller than 10-3 level.
适用于直流和VHF级信号的隔直流、旁路、祸合以及滤波、降噪、低脉冲电路。
Suitable for blocking, by-pass and coupling of DC and signals to VHF range. Widely used in filter, noise suppression and low pulse Circuits.
实验结果表明，基于激光莫尔信号的精密定位装置可获得亚微米级的平面定位精度。
The experimental results show that submicron level plane positioning accuracy can be achieved by the precision positioning device based on laser Moire signal.
二级市场的价格信号具有引致上市公司进行产业转移的功能，虽然存在着过度反应。
The price signal in secondary market can lead to the industrial shift of listed companies, although there exists an overreaction.
为了提高晚电位分析结果的精确度，提高信号噪声比，在HOLTER记录和分析时，采用了“二级筛选”的设计方法。
In order to improve the signal noise ratio and the precision of the analysis, a "two-level sifting" is processed in recording and analyzing VLP by HOLTER.
该算法具有多项式级的计算复杂度，已成功应用于移动式远程心电监护系统ECG信号的实时分析。
The method with computation complexity of polynomial order, has been successfully applied to the real-time analysis of signals in mobile ECG telemonitoring systems.
IBIS模型可以帮助设计者在系统板级或多板信号完整性约束的设计中获取准确的信息，以进行分析和计算。
The IBIS model is used to help get exact information in the integrity constraint design of system board level or multiple board level signals for analysis and calculation.
同直流信号直接耦合处理相比，交流信号耦合虽然要增设调制解调装置，但对后级信号处理电路的器件要求更低，信噪比更高。
Compared with DC coupling signal processing, it need lower requirement of signal processing circuit and have the merit of high signal-to-noise performance although it require the device of modem.
数据采集系统通常在前面的信号调节级中需要反叠叠低通滤波器以及低通噪声滤波器。
Data acquisition systems usually require anti-superimposing low-pass filter as well as low-pass noise filters in their preceding signal conditioning stages.
数据采集系统通常在前面的信号调节级中需要反叠叠低通滤波器以及低通噪声滤波器。
Data acquisition systems usually require anti-superimposing low-pass filter as well as low-pass noise filters in their preceding signal conditioning stages.
应用推荐