辅助信号发生器(简称ac)就是离子阱质谱众多控制电路中的一部分。
Auxiliary signal generator (AC) is a part of many control circuit of ion trap mass spectrograph.
分析了脉宽调制信号动态调节LED亮度的原理，设计了单片机控制电路；
The principle of PWM signals adjusting LED bright was analyzed, and the controlling circuit of MCU was designed.
模拟部分主要包括电源、功率控制、信号产生、信号调制、高压输出控制和反馈控制电路。
The analog part mainly includes power source, power control, signal generation, signal modulation, high voltage output control and feedback control circuit.
本文给出一种同步信号的控制电路，用以克服上述缺点。
A synchronous signal control circuit effeetively conquering this fault is presented in this paper.
介绍了电阻炉温度控制系统的硬件组成、温度信号的高精度转换及触发控制电路。
The hardware composition, high precision conversion of temperature signal and the trigger control circuit for resistance furnace are introduced.
并设计完成了以atmel公司的AT 89 C51单片机为核心，由传感检测电路、信号处理电路、输出控制电路等构成的横向随动控制系统。
The transverse slave control system was designed with the AT89C51 SCM from ATMEL Company. It consisted of sensing test circuit, signal processing circuit and output control circuit.
选择适合的压力、扭力传感器，开发单片机控制电路、小信号放大器，应用PC机并配合多功能数据采集卡完成数据采集与处理。
Select the appropriate pressure and torque sensors, develop SCM control circuit and small-signal amplifier, do data acquisition and Processing by PC and multifunctional data acquisition card.
一控制电路，它根据光发射接收器的信号控制水泵。
The control circuit controls the pump according to the signal of the light emission receiver.
控制电路通过水位检测信号，利用继电器和接触器控制排水机构。
The control circuit controls the water drainage mechanism using a relay and a contactor by the water level detection signal.
主要包括信号采集电路和步进电机控制电路。
It mainly includes signal collection circuit and stepped motor control circuit.
文中给出倍压输出的功率主电路和数字信号处理器（DSP）控制电路。
Voltage-doubler output of main topology and control circuit based on DSP are given in the paper.
系统选w 78le516单片机和CPLD来构造控制电路，用读写速度快、功耗低的低电压外部数据存储器CF卡存储采集完的信号。
The system select W78LE516 MCU and CPLD to construct the control circuit and use quickly read and write low power consumption, low-voltage external data memory CF card to save the signal.
论述了中子监测仪中的信号采集电路、液晶显示器的使用、可编程器件以及单片机控制电路的工作原理和特点。
The working principles and characteristics of signal collection circuit, liquid-crystal display (LCD), programmable logic device and MCU controlling circuit of neutron monitor device are discussed.
双列塑封的信号处理集成电路BY 139平均失效率达到10.8%，方形陶瓷封装的逻辑控制电路PC 11平均失效率达到2.5%。
The average failure rate of signal processing molectron BY139 was 10.8%. And the average failure rate of logical controlling molectron PC11 was 2.5%.
结合电力操作电源的特性，建立了基于有限双极性控制的操作电源的小信号模型，并设计了控制电路。
In this paper, the small signal modeling of the electric rectifier based on limited double poled control scheme is presented, and the control loop circuit is designed.
最后对用于实现信号多场累积和象差处理的帧处理器及其逻辑控制电路作了简要说明。
Finally, the frame processor used for carrying out multiple-field cumulation and image-difference processing and its logical control circuits are briefly treated.
通过提前产生求值完成信号，使用DSDCVS逻辑实现可重构单元的运算电路，改进了异步可重构单元的控制电路。
By producing evaluating completion signal early and using DSDCVS logic to design computation circuit of reconfigurable cell, a modified control circuit is proposed.
本文首先设计了系统的硬件电路，包括DSP的最小系统电路、采样预处理电路、输出信号死区形成电路、恒幅控制电路和显示电路。
At first, hardware circuit of the system has been designed, including minimum system of DSP, sampling pretreatment, dead zone formation, constant amplitude control and display circuit.
介绍了工业色谱仪中，压力等信号的智能检测与控制电路的设计与实现。
For the practical demand of urban traffic signal control, an intelligent traffic signal control system is designed.
超声内窥镜成像系统主要由超声探头激励电路、回波信号接收处理电路、同步控制电路、接口电路以及计算机构成。
The Ultrasonic Imaging System is made up of probe excitation circuit, receiving and processing circuit, synchronous control circuit, interface circuit and computer.
斩波控制电路选用了SG3525，经简单处理后得到两路脉冲输入到驱动芯片中作为斩波器的驱动信号。
SG3525 is selected as the core device of the chopper. meanwhile. two pulse that will input to the chopper can be obtained by simple design.
根据这一目的提出一种快速电压补偿算法，该算法使控制电路能够迅速检测出电压波动并输出补偿信号。
A fast compensation method has been proposed in this paper to detect voltage fluctuations and generate control signals.
该芯片包括超声波探头驱动电路、测时控制电路、测温控制电路、STOP信号转换电路等模块。
The chip comprises ultrasonic sensor driver circuit, time measurement control, temperature measurement control, STOP signal conversion such as modules design.
重点叙述了控制器的硬件系统构成，包括信号调理电路、脱扣控制电路和GPRS通信模块电路。
Focus on the controller hardware system structure, Including signal regulate circuit, tripping control circuit and GPRS communication module circuit.
对于差分输出的数模转换器，设计了能够产生高交叉点控制信号的电流源开关控制电路以减少输出的毛刺提高整体的动态性能。
For the difference output, designs a current switch signal generator with high cross-point and restricted voltage range to decrease the glitch of output, in order to obtain a good dynamic performance.
该基于BCI的上肢辅助康复系统是由信号采集、信号处理和上肢辅助康复装置三大部分以及接口控制电路组成。
The system of rehabilitation-assisting based on BCI consists of several parts, such as signal acquisition, signal procession, limb rehabilitation-assisted instrument and controlling circuit.
将单光子探测器的研制分为偏置电压、前置放大、雪崩信号提取、温度控制和数字控制电路五个模块。
The SPD R&D includes five modules: SPD bias voltage, pre-amplification, avalanche signal extraction, temperature control and digital control circuit.
控制电路翻译操作码，并且通过发送相应的控制信号来执行指令。这些信号控制数据的传送和ALU操作的执行。
Control circuitry interprets the opcode and executes the instruction by sending out the appropriate control signals to cause data to be moved or an operation to be performed by the ALU.
该电度表的控制电路主要由信号检测、实时时钟、输出控制电路及68hc 705c8单片机组成。
The control circuit of the Kilowatt-hour meter consists mainly of the circuit of signal detection, real-time clock and control of output, and it also consists of 68hc705c8 single chip computer.
该电度表的控制电路主要由信号检测、实时时钟、输出控制电路及68hc 705c8单片机组成。
The control circuit of the Kilowatt-hour meter consists mainly of the circuit of signal detection, real-time clock and control of output, and it also consists of 68hc705c8 single chip computer.
应用推荐