拖到绘图页后，可以添加8信道多路复用器或信号分离器。
Drag onto the page to add a 8 - channel multiplexer or demultiplexer.
在网络图中添加多路复用器、信号分离器或类似设备。
Adds a multiplexer, demultiplexer, or a similar device to your network diagram.
本文的工作集中在TD-SCDMA空中接口物理层基带信号处理的核心技术：信道的编码和复用。
Work of this paper focus on the core technology , namely Channel Coding and Multiplexing of baseband signal process of radio interface physical layer in TD-SCDMA.
通信卫星的频分复用机制，对卫星通信系统的发送信号频谱成型提出了严格的要求。
As frequency divided multiplex access is widely adopted in communication satellite system, strict frequency spectrum limits on modulator is mandated.
该全光脉冲整形器利用波分复用器将控制光脉冲引入光纤环形镜中，控制光脉冲由于交叉相位调制在信号光上产生了非线性附加相移。
Control pulse is coupled into this pulse shaper by wavelength division multiplexer. Nonlinear phase shift of signal laser is induced by control pulse because of cross phase modulation.
在光副载波复用(SCM)系统中若使用DOP作为DGD的监测信号将会遇到灵敏度低的问题。
The problem of low sensitivity will become seriously if DOP is used as the monitor signal of DGD in SCM system.
前端还包括一个12通道输入多路复用器，使多个视频信号被应用到ADV7183A。
The front end also includes a 12-channel input mux that enables multiple video signals to be applied to the ADV7183A.
提出了一种基于分割传输序列(PTS)改善正交频分复用信号峰值平均功率比(PAPR)的优化算法。
An optimal algorithm based on partial transmit sequences (PTS) for reducing the peak to average power ratio (PAPR) of orthogonal frequency division multiplexing signal is presented.
本文先后介绍伪卫星应用中的远近效应问题和常用的解决方案，重点分析了采用时分多路复用技术来对伪卫星信号进行重新设计。
In the paper, firstly introduce the near-far effect of the pseudolites and traditional solutions, then mainly analysis the TDMA technology and redesign the signal of the pseudolites.
自感知夹钳实现的难点是传感信号与执行信号的解耦，本文采用空分复用法做为解耦方法。
The point in realizing SSA is to find a good approach which could separate sensing signal from actuating signal.
“通过使用多个频率来编码脸的两个不同部位-这个过程被称为多路复用-大脑可以在同一时间代码多个信号，”他说。
"By using multiple frequencies to encode two different parts of the face - a process called multiplexing - the brain can code more signals at the same time," he said.
数据的串行总线可以携带多个通道同时在一个多路复用信号。
The serial bus can carry multiple channels of data at the same time in a multiplexing signal.
为了实现光纤法-珀传感器并联复用信号的高精度、绝对腔长解调，提出了一种改进的互相关解调法。
In order to demodulate optic fiber Fabry-Perot sensors multiplexed in parallel with high accuracy and absolute cavity length, an improved cross-correlation demodulation method is proposed.
结合工程应用的实例，介绍了采用密集波分复用系统光监控波道传送同步信号的方法。
Combined with the example of engineering application, it introduces the method of transporting synchronization signal through optical supervisory channel of DWDM system.
所述多路复用器提供经循环旋转由所述控制所确定的量的所述第一信号作为所述第二信号。
The multiplexers provides the first signals, circularly rotated by an amount determined by the control, as the second signals.
在SDI信号处理部分中，设计了一种基于FPGA的音视频数据解复用的IP模块，实现了IP模块替代asic。
In the SDI signal processing subsystem, the design of FPGA-based audio and video data demultiplexing of IP module, realized with the IP module replacement ASIC.
采用该修正算法修正的再复用器的音频信号可满足对时间要求更苛刻的调频同步音频 广播的要求。
Furthermore the audio signal after re-multiplexer with the new PCR correction method can meet FM synchronous broadcast requirements for a more accurate time.
该方案利用频移键控频分复用（FSK FDM）技术进行声频副载波调制，通过光强度调制实现远程在线EDFA监控信息随主信号的传输。
In the scheme, FSK-FDM technique is used in subcarrier modulation, and the EDFA's supervisory information is transmitted by optical intensity modulation.
该方法通过使用一束与信号光波长不同但相近的标记光作为反馈控制，自动地对偏振复用系统中的两路偏振信号进行解调。
By using a tag light transmitted in different but close wavelength to the data signal as the feedback control, the scheme can demultiplex automatically two orthogonal polarizations in PDM systems.
采用DDWS(直接数字合成)方法，产生了MFSK (m元频移键控)和OFDM(正交频分复用)两种水声通信信号。
And the method of DDWS (direct digital wave synthesis) is adopted to realize the signals of MFSK (multi-frequency shift keying) and OFDM (orthogonal frequency division multiplexing).
公开了用于非正交频分多路复用（OFDM）无线电信号的OFDM通信 的方法和装置。
Methods and apparatuses for Orthogonal Frequency-Division Multiplexing (OFDM) communication of non-OFDM radio signals are disclosed.
对测试任务配置时采用基于测试信号的配置方法，各层之间采用标准的接口，以提供最大限度的复用。
The methods based on test signal can be used in management test task. The standard interface of layers is presented for most duplicate.
根据光纤光栅多传感器复用时信号的光谱特征，提出了采用成像光谱技术对复用信号进行解调的方案。
According to the spectral feature of the signal generated by the multiplexed fiber Bragg grating (FBG) sensors, image spectrometry is proposed to demodulate multiplexed signal.
同时在理论上该系统支持基于码分复用模式的定位信号的发射，具有一定的扩展能力。
And the system can send the signal in code division multiplexing mode in theory, so it has a certain expansion of capacity.
对于高速光时分复用系统来说，只有时延精度高，性能稳定的光时分复用器才能保障复用后高速信号的质量。
The time-delay accuracy and stability of the multiplexer have an important influence on the quality of multiplexed signals.
为此提出了基于D触发器环路的相控阵信号发生技术和基于时分复用数模转换器（DAC）的相控阵信号发生技术。
Two approaches are developed:one based on a D flip-flop loop and the other based on a time-division multiplexing digital-to-analog converter (DAC).
采用数据融合技术，对来自不同光纤传感器的信号进行综合处理，建立了分离光纤传感器中的时变耦合信号模型，即多光纤传感器的复用和数据融合的模型。
This paper deals synthetically with the signal derived the various sensors via the technique of data fusion, and founds the model of separating the instantaneous coupling signal, I.
可编程补偿电路能够用来多路复用来自每一个放大器电路的不同的放大输出信号并且提供数字输出。
A programmable compensation circuit can be utilized to multiplex different amplified output signals from each of the amplifier circuits and to provide a digital output.
该多路复用器被耦合，以将商信号从上述至少两条路径之一中选择性地传送至级输出以选择级延迟之一。
The multiplexer is coupled to selectively communicate the quotient signal from one of the at least two paths to a stage output to select one of the stage delays.
该多路复用器被耦合，以将商信号从上述至少两条路径之一中选择性地传送至级输出以选择级延迟之一。
The multiplexer is coupled to selectively communicate the quotient signal from one of the at least two paths to a stage output to select one of the stage delays.
应用推荐