用气体保护塞焊，焊接封闭板与内侧灯罩之间的接合处。
Plug-weld the connection between the closing panel and the inner light housing under shielding gas.
全面系统地介绍了脉冲熔化极气体保护焊的各种控制方式，并明确地把它们分为两类：参数控制和熔滴过渡精确控制。
This article introduces all kind of control method of pulse melting pole in gas protection welding, and divided them into two kind: parameter control and melt dripping transition accurate control.
针对奥迪轿车消音器的材料、结构及接头形式，研制了适用于消音器焊接的熔化极气体保护自动焊设备，并对焊接工艺进行了研究。
In order to solve Audi car muffler welding problems, a MIG automatic welding process and equipment arc developed which is suitable for the material, structure and joint type of the muffler.
窄间隙MIG焊(熔化极气体保护焊)是一种先进的高质量焊接方法。
Narrow gap MIG welding is an advanced welding technic with high quality.
用气体保护全对接焊，焊接外侧梁。
Weld the outer side member with a full butt weld under shielding gas.
介绍了一种用于焊接现场的气体保护焊的自动混气设备，该设备能精确控制气体混合比例。
This paper introduced an automatic air mixing equipment for gas protection welding at work site, which can control the accurate proportion of airs.
通过试验在特征谱线下，采集了大量熔化极气体保护焊五种熔滴过渡的光谱信号波形。
A lot of spectrum of the metal transfer mode of metal gas are welding have been acquired in characteristic spectrum by testing.
CO2气体保护焊是广泛应用在生产中的焊接方法，但因为焊接时飞溅过大影响了焊接质量。
CO2 gas shielded arc welding is widely used in production, but the spatter produced in the weld process badly affects the quality of weld.
通量涂料主要任务是蒸发，形成保护气体保护焊水坑由氮气，氢气和氧气。
The flux coatings major task is to vaporize and form a shielding gas to protect the weld puddle from nitrogen, hydrogen and oxygen.
简体中文标题：焊接和相关工艺。接缝制备的建议。钢的手动金属电弧焊、气体保护金属电弧焊、气焊、TIG焊接和束焊。
English Name:Welding and allied processes - Recommendations for joint preparation - Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels.
焊条电弧焊焊缝的断裂韧性与气体保护焊焊缝的断裂韧性相当。
Fracture toughness of both shielded metal arc welding and gas metal arc welding is almost the same.
双丝间接电弧气体保护焊是一种新的焊接工艺。
The twin-wire indirect arc gas-shielded welding is a new welding technology.
熔化极气体保护焊(GMAW)是焊接生产中常用的焊接方法之一。
Gas metal arc welding (GMAW) is the main welding method in welding production.
为了研究强制对流对气体保护焊温度场的影响，通过红外热像仪检测了CO2气体保护焊的温度场，发现在熔池及其邻近区域温度呈圆锥型分布。
To reveal the influence of forced convection on gas shielded arc welding temperature field, the infrared camera was used to investigate the temperature field of the base metal in CO2 arc welding.
双丝间接电弧气体保护焊是一种新的焊接方法。
Twin-wire indirect arc gas shielded welding is a new welding technology.
焊接工艺评定记录单上应包括封底焊时所用的惰性保护气体组成成分和流率。
The PQR shall include the composition and flow rate of the shielding and inert gas backing, when used.
用CO_2气体保护焊方法采用适当焊接工艺及焊接材料，对压榨机辊轴轴颈进行了补焊修复实验研究。
The study and experiment on the repair of roller journal CO_2 shield welding with proper welding technics has been done by us.
简体中文标题：焊接消耗品。高强度钢气体保护电弧焊用焊丝电极、焊丝、焊条和沉积金属。分类。
English Name: welding consumables - wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification.
东方电机股份有限公司首次采用混合气体熔化极气体保护焊焊接水轮机转轮室，并且在出口叙利亚的迪什林水轮机中应用。
The mixed gas metal arc welding process is used for the first time by DFEM in the discharge chamber of the hydraulic turbine exported to Syria's Tishrin.
阐述了混合气体在熔化极气体保护焊中的应用现状，分析了保护气体成分的不同配比对熔化极气体保护焊的焊接工艺性能、焊接质量的影响。
This paper illustrates the applications of mixed gases in GMAW and analyzes the different proportion of shielding gas impacts on the welding technics performance and quality in GMAW.
利用该方法对V形坡口进行了金属熔化极气体保护电弧焊的跟踪试验，试验结果验证了所用方法的有效性。
Tracking experiment of MIG on V shape welding groove is made with this method, and the experiment result validates the validity of this method.
应用高效的气体保护熔化极电弧焊焊接铝合金薄板时，容易出现熔池下塌、烧穿等焊接缺陷。
Welding defects such as collapse of molten pool, burning through, would like to happen in the high efficient gas shielded metal arc welding.
根据熔化极焊丝填充焊的特性，对钢桥焊接中普遍应用的药芯焊丝CO_2气体保护焊和埋弧自动焊进行了焊接试验。
According to the characteristics of arc welding with filler wire, experiments about the FCAW-CO_2 and SAW which is commonly used in steel bridge welding were carried out.
由于钛合金的活性强，熔化焊时需要用惰性气体或真空进行保护。
Because of the high activeness of the titanium alloys, the inert gases or vacuum shielding is needed in fusion welding.
熔化极气体保护焊熔滴过渡数值模拟作为焊接学科的前沿领域和研究的热点之一，近年来已经取得了较大的进展。
The technology of numerical simulation for metal transfer in GMAW is one of the front and research hotspot in the weld filed , which has achieved great progress in recent years.
公司具备电焊、二氧化碳气体保护焊、氩弧焊、碳弧气刨、氧气切割等特种作业人员。
Companies with welding, carbon dioxide gas shielded arc welding, argon, carbon arc gouging, oxygen cutting and other special operations personnel.
双丝共熔池气体保护焊（TCGMAW）的熔滴过渡对焊缝成形以及焊接质量具有重要的影响。
The droplet transfer in the twin-wire co-pool gas-shielded metal arc welding(TCGMAW) process greatly affects the welding seam appearance and the welding quality.
双丝共熔池气体保护焊（TCGMAW）的熔滴过渡对焊缝成形以及焊接质量具有重要的影响。
The droplet transfer in the twin-wire co-pool gas-shielded metal arc welding(TCGMAW) process greatly affects the welding seam appearance and the welding quality.
应用推荐