底层涂料要求低粘度，高浸润性。
低粘度油生产泡沫大气泡打破容易。
Low viscosity oils produce foam with large bubbles that break easily.
也适用于各种低粘度物料的混炼。
Also applies to a variety of mixing low-viscosity materials.
单组份，低粘度，透明液体。
适合喷涂各种低粘度涂料。
为低粘度，具有一定的压缩强度的材料。
It is the material with low viscosity and some certain compressive strength.
能与选定的溶剂形成高浓度低粘度体系。
Work with selected solvents of low viscosity of the formation of high concentration.
由脱蜡油蒸馏生产的低粘度浅色或红色油。
Pale or red oils of low viscosity produced from dewaxed oils by distillation.
低粘度，建议用于无溶剂油漆，抗化学腐蚀。
Low viscosity resin. Recommended for solvent free coatings with high chemical resistance.
该粘结剂具有粘结强度高、低氨、低粘度等优点。
The adhesive has high cohesive strength, low nitrogen content and low viscosity.
最后，讨论了高固相、低粘度陶瓷浆料的制备原则。
Finally, the principles of the preparation of high solid loading slurry with low viscosity are discussed.
研究和制备低粘度多级油应充分考虑挥发性和磨损。
The volatility and valve train wear are the two difficulties encounted inthe formulation of low viscosity multigrade engine oil.
它们可能是可溶的或不可溶的，也可以是高或低粘度的。
They may be soluble or insoluble, and they may produce high or low viscosities.
采用逐步升高真空度的方法合成了低粘度的聚酯多元醇。
The low viscosity polyether polyol was synthesized under raising the vaccum degree step by step .
在高速时降低粘度，在低速时增大粘度，均可提高效率。
Some improvement in efficiency can be gained at high speed by reducing viscosity and at low speed by increasing viscosity.
低粘度，室温固化胺类固化剂，特别用于浇铸模具的制作。
Low viscosity, a room temperature curing amine hardener. Specially formulated filler is recommended for casting of patterns and moulds.
无加强，低粘度，黑色聚对苯二甲酸丁二酯树脂注塑成型。
Unreinforced, low viscosity, black polybutylene terephthalate resin for injection molding.
低粘度浇铸树脂，建议与胺类和聚肽胺类固化剂组合用于低压电器。
Low viscosity reactive casting resin. Recommended with amine and polyaminoamide curing agents for low voltage electrical and electronic applications.
采用细曲轴及平面滚动轴承技术及较低粘度的冷冻油以提高机械效率。
Applying the slender crankshaft, the level rolling bearing technology, and lower viscosity refrigeration oil, increased the mechanical efficiency.
208c不饱和聚酯树脂一种低粘度、预促进浇铸用不饱和聚酯树脂。
HCH-208C unsaturated polyester resin of a low viscosity, pre-casting used for unsaturated polyester resins.
无填充料、透明、低粘度的环氧树脂灌注材料，具有优良的物理、气性能。
Very low viscosity, Unfilled clear epoxy resin casting or impregnating material, has excellent physical and electrical properties.
低粘度油性金属切削油，适用于黄铜、青铜、铝、低到中碳钢的普通加工。
Cutting oil for general machining of brass, bronze, aluminium and low to medium carbon steel.
141是一种专用透明水白色浇铸的一种低粘度无预促进的不饱和聚酯树脂。
HCH-141 is a special transparent white water casting a low viscosity No advance for the unsaturated polyester resin.
研究了高固体分、低粘度热固性丙烯酸树脂的配方和性能，影响树脂合成的因素。
This paper studied the thermosetting acrylic resin with high solid and low viscosity in terms of its formulation, performance and the influential factors upon resin-polymerization.
实验还表明，菌株作用于高粘度原油的降粘效果要好于作用于低粘度原油的效果。
The effect of debasing high viscidity oil was better than low viscidity oil.
研究结果表明一定葡萄糖值的低粘度ssos作为微胶囊壁材具有很好的包埋效果。
The results indicated that low viscosity of SSOS with certain dextrose equivalent would be potential wall materials for microencapsulation of lemon oil.
它们可在水中分散，即使在浓度高于35％时，也生成易混合和泵送的低粘度浆液。
They can be dispersed in water, producing low-viscosity slurries that can be easily mixed and pumped, even at concentrations of greater than 35%.
对低粘度和中等粘度的农药混配，涡轮式搅拌器的搅拌效果最好，并从理论上作了分析。
The effect of turbine mixer is the best to mixing the low viscosity pesticide and middle viscosity pesticide, and it is analysed in theory.
对低粘度和中等粘度的农药混配，涡轮式搅拌器的搅拌效果最好，并从理论上作了分析。
The effect of turbine mixer is the best to mixing the low viscosity pesticide and middle viscosity pesticide, and it is analysed in theory.
应用推荐