以分析起重机油箱上体工艺特性和设计其低熔点合金拉深模具结构为例，论述了低熔点合金冲压模具的结构特点及优势。
Though the analyzing of the upper part of oil box and the designing of the structure of the die, the article discusses the characters and advantage of the low melting point alloy die.
不熔凝胶与周围树脂有同样的熔点，但是受热温度比平均温度低。
Unmelted gels have the same melting point as the surrounding resin, but remained colder than the average melt temperature.
不饱和脂肪比饱和脂肪的熔点低使其对热更易收影响。
Unsaturated fats have a lower melting point than saturated fats making them more susceptible to heat.
应该考虑到这种物质的熔点低。
Account should be taken of the low melting point of this substance.
铅的熔点比其他一些金属低。
Lead will fuse at a lower temperature than some other metals.
结果表明该晶体在dsc扫描的时间尺度范围内是稳定的，能保持原有的熔融特性，不是低熔点晶体转化而成的晶体。
It turns out that the crystal on the time-scale of the DSC experiment is stable, which is not transformed from the crystal with low melting point.
介绍了一种由低熔点石蜡和几种添加剂制成的橡胶防护蜡及其合成工艺条件。
This paper introduced a rubber protective wax and its production process made of low melt point wax and some additives.
萤石中含有卤族元素氟，是制取含氟化合物的主要原料，又由于熔点低而广泛用于炼钢、有色金属冶炼、水泥、玻璃、陶瓷。
A halogen element, f, is major raw materials deriving fluorine compound, and because of low melting point, that is widely used in steelmaking, nonferrous metal smelting, cement, glass and ceramics.
脂肪族聚酯没有用来生产纤维，可能是熔点低的缘故。
Aliphatic polyesters are not used for fiber production, because of their low melting points.
高z材料因其高熔点和低溅射率近年来受到越来越多的关注，但是难熔材料的脆性等问题仍然是这类材料应用的一大障碍。
More attentions are paid to high Z materials because of their high melting point and low sputter rate, but such materials remain the problems of brittleness to which is harmful for their application.
该钎料具有熔点低，对母材的润湿性好，钎焊接头组织中含有强度、硬度较高的呈弥散分布的固溶体，以及接头强度较高等特点。
It has low melting point and good wettability to the base-metal, and contains a high-strength and high-hardness solid solution structure, with a high strength of soldering joint.
低氟烧结矿中存在大量微气孔是由于其粘结相的熔点和结晶能力低造成的。
There are many pores in the sinter, which is attributed to low melting point and crystallization capacity of the binding phase.
利用广角X射线衍射分析仪对低熔点金属及合金填充聚合物材料体系的结晶行为进行了研究。
The crystallization property of polymer matrix filled with low melting metals and alloy was studied by wide-angle X-ray diffraction.
怎样依据低熔点玻璃膏的特性，控制一条保证产品质量的温度曲线是保证粘接质量、少出废品的关键。
How to control the temperature curve to fit with the properties of low melting point glass dust is very important to keep the product′s quality.
利用哈克流变仪对低熔点双组分合金填充聚合物材料体系的流变性进行了研究。
The rheology properties of polymer filled with lower melting point dual component metallic alloy were studied by Hakke rheometer.
研究了强酸性低熔点电解质熔液中铝在钨丝电极上的沉积和溶解损失。
The aluminium deposition and dissolution loss in low melting point electrolyte melts have been studied.
采用称重法对在添加了辅助装置的熔喷设备上制得的以低熔点共聚酰胺为原料的热熔纤网的均匀性进行了测试。
The uniformity of thin melt-blown webs which is produced of low melting point copolyamide by melt blowing line with accessory device was tested by weight method.
结果表明，对于中等壁负荷，传统的传热机制是适宜的，而对于高强壁负荷，把低熔点合金的相变贮、放热机制引进到混合堆的热工学中是有意义的。
The results indicate that the classical heat transfer mechanism is suitable for the medium wall load and the potential heat of the low-melting-point alloy is useful for high wall load.
结果利多卡因-月桂醇二元共熔混合物的熔点明显比利多卡因低。
Results The melting point of the lidocaine-dodecanol binary eutectic system was markedly lower than that of pure lidocaine.
钛酸铝是一种优异的高熔点、低膨胀无机非金属材料。
Aluminum titanate is an excellent inorganic non-metal material with high melting point and low expansion.
本文将热塑性淀粉与低熔点共聚酰胺以不同的比例共混挤出，得到增强的热塑性淀粉材料。
In this paper, the reinforced thermoplastic starch(TPS)materials were obtained by extruding the mixture of TPS and copolyamide with a single scerw extruder.
目的探讨低熔点铅不规则档块技术在鼻咽癌放疗中的临床价值。
Objective To evaluate the radiotherapy effects on nasopharyngeal carcinoma with low-melting-point lead irregular shield technique.
研究了合金元素、加工温度、金属含量、第三组分对低熔点金属填充聚合物材料断口形貌的影响。
It studied the influences of alloy elements, processing temperature, contents of metal and additives on the fracture section morphology of low-melting alloy filled polymer.
针对传统失芯注射成型利用低熔点合金熔融去芯时出现的问题，研制了一种新型水溶性失芯材料。
In view of some problems emerged in melting lose core process of low melting alloy in traditional lose core injection molding technology, a new type of water soluble lose core material was developed.
设计了一种用于测定低熔点二元合金步冷曲线的试样容器。
The sample cell used to measure the gradual cooling curve of two components alloy with low melting points was designed.
介绍低熔点玻璃材料封接工艺，主要包括低熔点玻璃材料的选择、调制、涂覆、加热处理以及玻璃基板的预处理。
The sealing technique of FED is introduced in this papers, which include the selection, mixing and painting of low fusing point glass, the process of heating and pre-process of the flat glass.
另一方面低熔点的玻璃相引起微波损耗急剧上升。
Additionally, the glass phase with low melting point may also cause microwave dielectric loss to increase remarkably.
对于改性剂r含量不同的低熔点聚酯，在后加工时应充分考虑到温度对熔体粘度的影响。
For these low melting point polyesters with different content of modifier r, the influence of temperature on viscosity of melt must be paid attention during post processing.
在常规PET生产中加入适当的第三单体和第四单体可制备低熔点聚酯。
A low-melting point PET can be produced by adding the proper third and forth monomers during regular PET production.
橡胶防护蜡，是由低熔点石蜡、高熔点石蜡、微晶蜡和聚乙烯蜡制成的。
Rubber protective wax is made from paraffin wax with low melting point, paraffin wax with high melting point and polyethylene wax.
应用推荐