用于相同强度等级的低合金高强钢的焊接。
For welding low-alloy and high strength steel with corresponding strength grade.
研究了重型吊车梁用D36低合金高强钢的焊接性。
The paper investigates the weldability of D36 HSLA steel used for heavy crane beams.
16Mn是我国低合金高强钢中用量最多、产量最大的钢种。
16mn is China's low alloy high strength steel up to yield the maximum amount of steel.
概述了钛微合金化在低合金高强钢中的工业应用进展、难点及可能的研究方向。
The developments of industrial application in HSLA steel, difficulty and potential research directions of titanium micro alloying were also analyzed.
B700L是宝钢生产的一种新型的低合金高强钢，其中添加了很多微合金元素。
B700L is a new type of low-alloy high strength steel, which adds a lot of micro-alloying elements, produced by baosteel.
总结了钛在低合金高强钢中的析出行为，包括析出物的种类、形态、尺寸及析出动力学；
The precipitation behaviors of titanium in high strength low alloy steel(HSLA steel) were summarized including the type, morphology, size and precipitation kinetics of the precipitates.
低合金高强钢特厚板的焊接，由于焊接应力的影响，在控制缺陷和变形方面都比较困难。
For welding the extra thick plate of low alloy high strength steel, due to the influence of welding stress, it relatively difficulty for controlling the defect and deformation.
合理控制低合金高强钢焊缝中针状铁素体的转变行为，对获得理想的焊缝性能具有重要意义。
It is of great importance for obtaining the perfect welding properties to control the AF transformation behavior reasonably in HSLA steel weld.
研制了一种低焊接裂纹敏感性高能量输入焊接用低合金高强钢，并研究了其冷应变时效行为。
A new large heat input welding high strength low alloy steel with low susceptivity to weld cold cracking was developed and the cold strain aging behavior was investigated.
同时，针对样品制备过程中的各个关键步骤和环节，提出了低合金高强钢萃取复型样品制备的关键技术要点。
The extraction replica key techniques for TEM sample preparation of low alloying high strength steels were introduced in detail.
采用试制埋弧焊丝ws03，匹配烧结焊剂SJ101，对低合金高强钢WDL610D进行了埋弧焊工艺适应性研究。
Submerged arc welding of high strength low alloy steel WDL610D is researched by using new developing welding wire WS03 and matching agglomerated flux SJ101.
并结合有限元计算所得的不同预应变条件下的缺口前端的应力应变场分布，主要分析了预应变对不同组织低合金高强钢缺口试样断裂行为的影响。
The fracture behavior at crack tip within CMn steel is analyzed based on the experiments of 3 PB precracked specimens and FEM calculation and simulation.
本文通过对电阻点焊电极电压动态特性的分析，研究了低碳钢及低合金高强度钢电阻点焊的质量问题。
The quality of resistance spot welding of low carbon steel and high strength low alloy steel is studied by looking into the dynamic voltage characteristics of the electrodes.
钢材大致可分为四类：炭素钢，合金钢，高强度低合金钢和不锈钢。
There are four broad classifications of steel: carbon steels, alloy steels, high-strength low-alloy steels and stainless steels.
该焊剂焊接工艺性能优越。通过焊剂过渡合金，为采用普通h 08 A焊丝焊接低合金高强度钢提供了理想的途径。
This bonded flux has excellent technique properties, and can transfer alloying elements, so it has offered an ideal way for welding high strength steels with the common H08A welding wires.
针对传统上高锰钢作为履带板材料在实际应用中的不足，研究了一种新型的铸造m - B低合金高强度耐磨钢。
A kind of new M-B low-alloy wear resistance steel with high strength has been studied to overcome the deficiency of traditional high-manganese steel used in making grippad.
为适应大型工程机械焊接用钢需要，对低合金高强度钢HG80及其焊接接头的疲劳裂纹扩展速率进行了研究。
To meet the development of steels used for the large engineering machinery, fatigue crack growth rates of a high strength low alloy steel HG80 and welded joint were investigated.
对采用硅酸铝保温的淬硬倾向大的低合金高强度钢的焊接区域不同部位的焊接热循环进行了研究。
The investigation into the thermal cycles at different zones of a weld on HSLA steel with hardened tendency with aluminium silicate as thermal insulator are carried out completely.
钒铁用作炼钢的添加剂，生产高强度低合金钢、高速钢、工具钢、不锈钢及永久磁铁等。
Ferrovanadium can be used as additive in smelting high-intensity-low-alloy steel, high speed steel, tool steel, stainless steel and permanent magnet.
介绍了火焰切割对低合金高强度钢在残余应力、淬硬、渗碳等方面的影响。
This article introduces the impact of flame-cutting on high strength lower alloy structural steels from curious aspects Such as remnant stress, quench rigidity, cementite and so on.
生产钢种：碳素结构钢、低合金高强度结构钢、桥梁用钢、耐候钢等。
Production steel grade: carbon structure steel, low alloy high intensity structure steel, steel for bridge, weathering steel, etc.
为了满足钢结构用钢的市场需求，本钢成功地开发了具有较高性能的结构用低合金高强度Q 460c热轧钢板。
In order to fulfil the requirement of steel market for structure, BXSTEEL developed Q460C low alloyed high strength hot-rolling plate for structure with higher capability successfully.
HG70钢是一种高强度低合金机械工程用钢。
HG70 steel is a high strength and low carbon steel for mechanical engineering use.
针对传统的高锰钢作为履带板材料在实际应用中的不足，试验采用了一种新型的铸造低合金高强度耐磨钢替代。
A kind of new low-alloy steel with strength was studied to overcome the deficiency of traditional high-manganese steel used in making creeper truck.
可焊接材料：低碳钢、高强度钢、中碳钢、低合金钢。
Wwlding material:low carbon steel, high strength steel, medium carbon steel, low alloy steel.
高强度船体结构用钢及其板卷生产方法属低合金钢，尤其涉及船体结 构用钢及其生产方法。
The present invention relates to low alloy steel and is especially steel for hull structure and its production process.
钢材大致辞可分为四类，即：碳素钢、合金钢、高强度低合金钢和不锈钢。
There are four broad classifications of steel : carbon steels, alloy steels, high-strength low-alloy steels and stainless steels.
低合金高强度调质钢建议采用一阶段的轧制方式，冷速不宜过低。
Low-alloy high strength quenched and tempered steel suggested using one-stage rolling method, cooling rate should not be too low.
可焊材料：低碳钢、高强度钢、中碳钢，低合金钢。
Wwlding material: low carbon steel, high strength steel, medium carbon steel, low alloy steel.
可焊材料：低碳钢、高强度钢、中碳钢，低合金钢。
Wwlding material: low carbon steel, high strength steel, medium carbon steel, low alloy steel.
应用推荐