交流位置伺服系统广泛应用于工业控制系统中。
The AC position servo systems are extensively used in the industrial control systems.
管委会范围是设计，机制的所有类型的速度和位置伺服。
The MC range is designed for all types of speed and positioning servo-mechanisms.
飞机进气道斜板控制系统是一种典型的电液位置伺服系统。
The controller for swash plate of aircraft inlet is a typical hydraulic serve position control system.
还有位置伺服式电动调焦以及附加信息的译码显示与记录等。
Decoding of additional information on SAR data film, the useful information can be obtained and recorded on image film.
采用永磁同步伺服电动机，构成多管火箭炮交流位置伺服系统。
The permanent magnetism synchronous servomotor was adopted to construct the AC position servo system of multiple launch rockets.
本文研究脉冲编码调制(PCM)控制方式的气压位置伺服系统。
A pneumatic position servo system with pulse code modulation (PCM) is described in this paper.
提出了一种基于滑模控制的永磁同步直线电动机位置伺服控制器。
A position servo controller based on sliding mode control for permanent magnet linear synchronous motors was proposed.
提出一种基于数字信号处理器（DSP）的交流位置伺服控制系统。
This paper presents a digitized AC position servo system based on DSP.
本文运用自校正自适应控制理论对气动位置伺服控制系统进行了研究。
The pneumatic position servo system is studied by self-tuning adaptive control theory in this dissertation.
提出一种基于数字信号处理器（DSP）的全数字直流位置伺服控制系统。
This paper presents a digitized DC motor position servo control system based on DSP.
系统提出采用闭环位置伺服控制，建立跟随误差和数字反馈的模型和算法。
The system proposes the application of a closed loop position servo control and sets up a model and algorithm of er ror tracing and digital feedback.
实验结果初步验证了该位置伺服控制系统在精密加工机床上应用的可行性。
The result validates that this position control system using as the precision machine feed drive servo servo system is feasible.
为了兼顾位置伺服控制的快速性和精确性，在本环节设计了一个模糊控制器。
In this control loop, on account of giving consideration to both the rapidity and precision of position servo-control, we designed a fuzzy controller.
实验结果表明，用高速开关阀可以实现快速、精确的气动执行器位置伺服控制。
The experimental results show that the pneumatic actuator position servo system can be implemented using high-speed switching valves fast and accurately.
本文的重点是基于气动橡胶驱动器的蠕动机器人位置伺服控制系统的应用性研究。
The emphasis is application research of position servo control system in squirming robot based on pneumatic columnar elastic shell actuator in this article.
针对数控机床的位置伺服系统，为其控制器设计了一种复合滑模变结构控制算法。
Aiming at the position servo system of NC machining tool, this paper designs a kind of control arithmetic on compound sliding variable structure for its controller.
该驱动器通过RS485总线与外界通信，可按照预定参数完成速度和位置伺服。
This driver can communicate externally with RS485 bus and accomplish speed servo and position servo with the scheduled parameters.
本文的重点是基于气动橡胶驱动器的蠕动机器人位置伺服控制系统的应用性研究。
The robotic research institute in Zhejiang University of Technology is now developing a new typical squirming robot based on pneumatic columnar elastic shell actuator.
本位置伺服系统它采用STD总线模块式的多cpu结构，主要面向经济型数控机床。
The position servo system it USES STD bus module type more CPU structure, mainly for economical nc machine tools.
本文使用一种五点开关pwm控制算法对高速开关阀控气动执行器进行位置伺服控制。
In this paper, a pneumatic actuator position servo system is described, which controlled by a five-point switch PWM control method using high-speed switching valves.
电液控制单元是船用舵机电液位置伺服系统关键部件，其性能的优劣直接影响舵机的性能。
Electrohydraulic control unit whose performance has direct effect on rudder's characteristics is the key component of ship rudder position control system.
随着角位置伺服控制系统中对数字化的需求，必须对传统的角位置伺服控制系统进行改进。
Because of the need of the digital control in the Angle servo control system, it is necessary to improve the traditional Angle servo control system.
同时综合考虑多种控制策略的优劣，确定位置伺服控制的三环控制策略，明确各环调节作用。
At the same time considered the pros and cons of various control strategies, determine position servo control of the three-loops control strategy and a clear regulation of the effects.
应用模糊自整定PID控制方法对车用柴油机电液调速器油门执行器位置伺服控制进行研究。
Serve-control of accelerator position for an electro-hydraulic speed governor of automotive diesel engine was studied base on fuzzy self-adjusting PID control theory.
近年来，位置伺服控制系统已经在精密数控机床、加工中心、机器人等领域得到了广泛的应用。
Recently, position servo control system has been widely used in most fields like NC machine tool, machining center, robot etc.
在永磁同步电机交流伺服系统中，采用直接转矩控制及模糊自适应PI控制构成位置伺服控制器。
For AC servo system of permanent magnet synchronous motor (PMSM), the position servo controller was constructed with direct torque control and self-adjusting PI control based on Fuzzy inferences.
实验结果表明，在经过数次迭代学习后，闭环离散学习控制可使位置伺服系统达到良好的控制性能。
The experiment results show that this scheme is able to attain a good performance for the position servo systems after several iterative learnings.
直线力电机是直线电机的一种，主要是作为执行器应用于电液伺服阀等位置伺服或开关量控制系统。
As a kind of linear motor, linear force motor usually is used as an actuator in positioning or switching control system for hydrometric servo valves and so on.
平行多辊矫直机是材料平整工业中十分重要的设备，但高精度液压位置伺服控制矫直机国内还很少。
Parallel multi-roller straightener is an important equipment in the materials straightening industry. But high-precision straightener with hydraulic position servo-control can hardly be made in China.
本文还给出了提出的迭代学习控制律在一个电液位置伺服控制系统中的应用实例，来验证算法的有效性。
The paper also gives a case of the electro-hydraulic position servo control system to prove the validity of the proposed ILC.
应用推荐