利用该矩阵,建立位移控制方程组。
Then, the optimal control equations were derived from the sensitivity matrix.
用位移传感器验证位移控制。
嵌岩扩底抗拔桩极限承载力主要受桩顶位移控制。
The ultimate uplift capacity of pile is mainly effected affected by enlarged base of pile.
针对倒立摆的位移控制,提出一种非线性滑模变结构控制方法。
A nonlinear sliding mode control method is presented for single inverted pendulum position tracking control.
当滑坡长度较大时,管线的最大轴向应变受土体下滑位移控制。
If soil movement is large, the pipe strain is controlled by the length of the landslide.
提出了一种在恒流点焊控制器基础上加入电极热膨胀位移控制规则的方法。
This paper presents a method about electrode movement control rule inserted in current-constant spot-weld controller.
以位移控制为目标,通过调整锚杆的位置,对单支点桩锚支护结构的设计进行优化。
Finally, the design about the single fulcrum pile_anchor retaining structure is optimized by adjusting the position of anchor to make the displacement of the top end of the pile the smallest.
试验对该网壳结构内部16个节点采用位移控制法进行比例加载,得到了结构的屈曲后性能。
Load was exerted on the 16 interior nodes by displacement control method, in this way the post buckling behavior of this structure was obtained.
本文提出了锚拉抗滑桩锚拉力计算的桩顶位移控制法,计算控制桩顶位移所需的最小锚拉力。
The thesis puts forward the pile-top displacement control method, and it can account the least force of the anchor wire on anti-slide pile.
结合位移控制有限元数值模拟和既有离心模型试验结果进行对比分析,验证该方法的有效性。
The accuracy of the proposed method is demonstrated with the displacement-controlled finite element numerical analysis and existing centrifuge model tests.
将弦臂控制和角度测量结合在一起,以测得的角度值作为反馈,和步进电机组成闭环位移控制系统。
In combining cantilever control with angular measurement and using the measured angular values as feedback, a closed-loop displacement control system is formed together with a step motor.
在上述研究基础上,对上拔位移机理进行了分析研究,提出了上拔位移计算模型和上拔位移控制的分析计算方法。
According to aforesaid work, uplift displacement mechanism is in research, displacement model and calculation means of uplift displacement control design is advanced.
通过计算机控制,加力机构可以对微小试件按力或位移控制方式加载,载荷大小通过传感器直接由计算机数字化。
The loading frame can work in either load-control or displacement-control mode, and signals from the load sensor are digitalized with the control computer.
控制系统主要有温控系统、传动位移控制系统、压力控制系统、真空安全报警系统及其它一些供电控制系统等组成。
Electric control system is composed of temperature control system, drive control system, pressure control system, vacuum safe warning system, and other power supply control system.
采用数据文件插补和在线插补两种方案,解决了拉弯机位移控制中任意曲线的插补问题,实现了任意曲线轨迹的精确控制。
To solve the interpolation problem of random curve, the schemes of data file interpolation and on-line interpolation are used, which proves to be accurate.
文章在吸收借鉴最新隔震理论成果的基础上,针对常用的软垫式隔震系统推出了水平地震作用下的隔震结构相对位移控制条件。
On the basis of researching result of predecessor, this paper has deduced relative displacement controlling condition of isolating-quake structure for cushion isolating-quake system.
此外,介绍了关于应变软化材料有限元数值模拟的一些研究进展,并且介绍了适合应变软化材料有限元数值模拟的位移控制法。
Furthermore the research on the FEM modeling of strain softening material is reviewed followed by the introduction of a FEM modeling based on the displacement-controlled method.
整经托架的横向位移完全由电脑控制,并且每一条均可自动定位。
Lateral displacement of the warping carrier is completely controlled by the computer, with automatic positioning for each section.
Kinect通过三维物体扫描和控制使玩家可以通过用户的真实移动来控制角色的位移。
Kinect enables video game players to move characters through the use of real-life movements made possible by 3-d object scanning and manipulation.
通过改变两个之一电磁铁的电流,阀芯移动的位移能够被改变,因此控制了通过阀的流量。
By varying the current to either solenoid, the amount of spool movement can be varied and hence the amount of flow through the valve can be controlled.
步进电机是将电脉冲信号转变为角位移或线位移的开环控制元件。
Electrical power pulse signal will be entered into angular displacement or displacement of the Central Line control components.
步进电机是一种数字控制电机,它将脉冲信号转变成角位移,电机的转速由脉冲信号频率决定。
Stepper motor is a motor controlled by digital signal, which converts pulse signal into Angle displacement. The wheeling speed is controlled by the frequency of pulse signal.
从而成功地实现了对气压焊的焊接压力、气体流量、顶锻位移量等焊接过程参数的控制,并使控制系统具有较快的动态响应速度和较高的控制精度。
So the control of the welding parameter such as welding pressure, gas flux, upsetting length is realized, and the system has a high dynamic response rapid and a high control precision.
为了避免这种情况的发生,我们要研究电机转子的轴向位移以及如何测量它以更好的控制它。
To avoid this from happening, we have to study the axial displacement motor rotor and how to measure it to better control it.
最后,由底层系统来实现对机电系统的运行周期和位移的控制。
The lower system is responsible for the control of operation cycle and displacement of electromechanical system.
空间智能桁架结构的最优控制问题是一个多目标问题,需要综合考虑结构的强度、位移和控制能耗。
The optimum control of intelligent space truss structures is a multi-objective issue. The strength, displacement of node and energy consumption need to be controlled simultaneously.
本文介绍了一个Z—80单板微型计算机控制的位移系统。
This paper presents a displacement system controlled by a Z-80 single board microcomputer.
对挠性转子轴承系统电磁阻尼器的电流位差常相位移振动控制进行研究。
The control of the constant Phase difference between the current and the displacement of the magnetic damper in rotor-bearing system is studied.
对挠性转子轴承系统电磁阻尼器的电流位差常相位移振动控制进行研究。
The control of the constant Phase difference between the current and the displacement of the magnetic damper in rotor-bearing system is studied.
应用推荐