实验结果表明，所设计的伺服驱动控制器具有良好的速度控制能力和抗负载扰动能力。
Experiment results indicated that the servo controller possesses the characteristics of good speed control performance and anti-load-disturbance ability.
介绍了采用元器件计数预计法的伺服驱动控制的平均故障间隔时间(MTBF)实用计算方法。
The paper introduces a practical method to calculate the mean time between failures (MTBF) of ac servo controllers, using the components counting prediction method.
介绍伺服驱动控制技术在多工位压力机的输送系统上的应用情况，重点介绍伺服控制系统的工作原理及组成。
The article presents the application of servo control in the conveying system of transfer press, particularly describes the operating principle and composition of servo control system.
论述采用CNC交流伺服驱动控制及高精度机械传动零部件组成的多自由度伺服螺旋传动系统中的主要误差来源。
The error sources in a high precision screw driver mechanism controlled by a CNCservo system in presented in this paper.
第一，基于双频毫米波辐射计的扫描要求，设计了基于PC计算机和嵌入式系统道的两维伺服驱动电路，完成了扫描控制、通信协议和伺服驱动控制的软件设计。
Firstly, a two-dimensional servo-control driver circuit, which consists of PC and an embedded system, is designed based on the scanning requirement of the dual frequency millimeter wave radiometer.
随着伺服控制技术的逐步提高，目前伺服驱动单元正逐步成为驱动单元的主力军，伺服驱动单元的价格也在逐步减低。
Along with the gradual improvement of the servo control technology, the servo drive unit is gradually becoming the main force of the drive unit, servo drive unit price also gradually to reduce.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
A kind of the pulse control mode, the drive and motor closed loop, but not to the numerical control system, the feedback device, in a sense, can open loop control called the servo control.
采用交流伺服电机作为驱动器件，可以和直流伺服电机一样构成高精度，高性能的半闭环或闭环控制系统。
Adopting ac servo motor as the driving device, can the dc servo motor and a high precision, high performance as the half closed loop or closed loop control system.
本文的重点是基于气动橡胶驱动器的蠕动机器人位置伺服控制系统的应用性研究。
The emphasis is application research of position servo control system in squirming robot based on pneumatic columnar elastic shell actuator in this article.
采用微处理器、专用的运动控制和驱动芯片以及光电编码器实现了机器人关节的伺服闭环运动控制；
Microprocessor, dedicated motion controller and driver, optical electronic encoder were used to realize servo closed-loop motion control.
介绍了某机载雷达伺服系统，对其工作原理、基本结构、控制方案、驱动技术等进行了分析探讨。
An airborne radar servo system is introduced in the paper, and the principle, structure, control scheme, drive technology of the system are analyzed.
电机现代控制技术是伺服驱动系统的核心，也是现代制造装备最具代表性的先进标志之一。
The modern control technology for motor is not only the core of servo drive systems, but is one of the most typical symbols of modern manufacturing equipments.
再用电机伺服驱动系统控制天线转动，调整其重新指向卫星接收信号。
The motor servo drive system was used to control antenna turning, adjust the antenna to point at satellite again and receive signal.
人机界面，可编程控制、气动、伺服电机驱动，先进的杀菌与无菌保障。
Man-machine inter-facial can program logic control, pneumatic, servo motor drive, advanced sterilizing and asepsis keeping.
以TMS320F2812作为主控CPU，以IR2110作为驱动芯片，完成了导弹舵机伺服控制系统的硬件设计，进行了控制器主电路的分析与设计。
The missile rudder servo controller adopts TMS320F2812 as main CPU, IR2110 as drive chip. Each part of main circuit is analyzed in detail.
重点介绍了永磁交流伺服系统的控制策略，位置检测和辨识、主电路和驱动技术等关键技术。
This article introduced emphatically the control strategy, position detection and identification, drive technique as well as main circuit of permanent magnet Ac servo system.
所研究的控制方法均在AC200交流伺服驱动系统的频率域实验模型上做了仿真实验，结果支持了本文分析所得的结论。
All the concerned control strategies are supported with the simulation results that are made on the experimental frequency domain model of the AC200 servo drive system.
随着伺服控制技术的逐步提高，目前伺服驱动单元正逐步成为驱动单元的主力军，伺服驱动单元的价格也在逐步减低。
Along with the gradual improvement of the servo control technology, the servo drive unit is gradually becoming the main drive unit, servo drive unit price also gradually to reduce.
交流伺服控制系统的组成本文所设计的交流伺服控制系统是用于数控机床上的进给驱动系统。
This paper introduces an AC servo control system based on the design of CPLD and analogue controller integration.
下位TMSF2812型DSP芯片则主要用于实现复杂的插补及控制算法，并以西门子伺服驱动放大器和交流伺服电机作为驱动单元，对改造后的数控铣床各轴进行位置控制。
The lower DSP (TMS F2812) is used to realize the interpolation and control of three axes for the retrofitted CNC milling machine equipped with SIEMENS servo drive amplifiers and ac servo motors.
机床进给伺服驱动系统是数控机床的重要组成部分，控制精度是非常重要的指标。
Servo feeding system is part of CNC machine tool, the control precision is very important.
采用伺服驱动器的速度控制和位置控制相结合的方法实现天车定位和吊臂运动的精确控制。
The combination of speed control and location control of servo driver realized the accurate control of crane's location and steeve's movement.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
A kind of the use of impulsive control mode, the drive and motor closed loop, but not feedback to the numerical control system, this drive, in a sense, can open loop control called the servo control.
现代无人直升机飞行控制系统一般由飞行控制计算机、伺服驱动机构、传感器、地面监测控制等分系统组成。
The modern unmanned helicopter flight control system is generally composed of the flight control computer, the servo driving mechanism, the sensor, and the ground monitor control system etc.
设置运动控制卡中的参数，通过控制卡发出的脉冲与方向信号来驱动伺服电机。
By the parameters, the pulses and the direction signals of the control card, the servo motor is drived.
本论文以超精密机床用永磁同步直线电机驱动进给伺服系统位置控制器为研究对象。
In this paper, the research object is the position controller of a permanent magnet linear motor direct drive feed servo system.
本文提出了基于DSP的永磁同步直线电机全数字伺服控制与驱动系统。
In this paper, the DSP-based all-digital servo and driving system for the permanent magnet synchronous linear motor is proposed.
空气动力元件以及具有空气动力元件的机翼，伺服驱动-控制模块，计算机，计算机程序和用于影响尾迹涡流的方法。
Aerodynamic body and carrier wing comprising an aerodynamic body, actuating drive control module, computer, computer program, and method for influencing post-turbulences.
空气动力元件以及具有空气动力元件的机翼，伺服驱动-控制模块，计算机，计算机程序和用于影响尾迹涡流的方法。
Aerodynamic body and carrier wing comprising an aerodynamic body, actuating drive control module, computer, computer program, and method for influencing post-turbulences.
应用推荐