本文设计的控制系统是一套较为理想的直流伺服电动机控制系统。
It proves that the controlling system designed by this paper is a more perfect system using in the DC servo motor controlling field.
伺服电动机更容易控制,但是他们的功率都比较小,需要明确的电压,andarelessintuitive。
Servos are much easier to control, but they generally are less energy efficient, have explicit voltage requirements, and are less intuitive.
永磁同步电动机系统具有力矩系数大、力矩波动小以及控制灵活等优点,在许多精密伺服控制系统中得到广泛应用。
Due to the large torque coefficient, small torque ripple and ease of control, permanent magnet synchronous motor (PMSM) system has been widely used in many accurate servo control systems.
系列单相高精度全自动交流稳压器,由接触式自耦调压伺服式电动机、自动控制电路等组成。
SVC(TND)SERIES single phase high precision full automatic ac voltage regulator composable of contact auto voltage regulator, servo motor automatic control circuit etc.
步进电动机是一种脉冲控制的伺服电动机。
Stepping motor is a kind of motors that are controlled by pulse.
本文设计了一种基于DSP的直流无刷电动机伺服控制系统。
In this paper, a DC brushless motor servo-control system based on DSP is designed.
将模糊控制技术引入到了感应电动机矢量控制+位置伺服系统中,设计了模糊位置和电流控制器。
Fuzzy control strategy is introduced into a field-oriented controlled induction motor servo system in this paper.
本文讨论了模糊控制的原理以及交流伺服电动机的控制结构。
In this paper the elements of fuzzy control and architecture of servo alternating motor are discussed.
建立了伺服感应电动机DTC控制模型,其中速度观测器采用文中提出的自学习模糊速度观测器。
Then, a DTC induction motor servo control simulation model is established, which adopts the self-learning fuzzy in velocity observer.
文章提出了采用一种新型专用智能功率模块ASIPM,结合数字信号处理器DSP开发的永磁同步电动机伺服控制系统;
This paper proposes a servo control system for permanent magnet synchronous machine (PMSM) based on Application Specific Intelligent Power Module (ASIPM) and Digital Signal Processor (DSP).
设计的凸轮控制器可实现对AC伺服电动机进行分段变速控制以及凸轮一周中的两通两断的控制功能。
The cam controller allows the AC servo motor to run at different speed for different angles, and to turn on and turn off twi.
提出一种用运动控制芯片PCL240AS构造的伺服电动机和步进电动机通用的运动控制器。
A motion controller interchangeable for servo motor and step motor constructed by motion control chip PCL240AS is introduced.
根据感应电动机伺服驱动系统高性能的要求,设计了一种基于双模糊神经网络的滑模控制的感应电动机伺服驱动系统。
Considering the requirement of high performance of induction motor servo drive system, this paper designs such a system with a sliding-mode position controller based on double fuzzy neural network.
在PC 104总线控制下,应用运动控制芯片LM 629和电动机驱动芯片LMD18200实现了直流伺服电动机的控制。
The DC servo motors are controlled with motion controller LM629 and motor drive chip LMD18200 based on PC104 bus.
介绍了无刷直流电动机(BLDCM)位置伺服系统离散时间变结构控制器的设计方法。
In this paper the design of a discrete time variable structure controller (VSC) for a brushless DC motor drive (BLDCM) position servo system is introduced.
为了解决永磁直线电动机伺服系统中负载扰动及参数变化对系统性能影响较大的问题,采用了鲁棒控制方法。
The large influence of load disturbances and parameter changes on PMLSM servo system was resolved by robust control strategy.
讨论了一种采用ARM处理器及FPGA设计的7轴电动机伺服运动控制器。
This paper presents a high performance 7-axis controller developed, with the cores of ARM and FPGA.
提出了一种基于滑模控制的永磁同步直线电动机位置伺服控制器。
A position servo controller based on sliding mode control for permanent magnet linear synchronous motors was proposed.
实验结果表明,直线电动机的伺服刚度只受位置环比例增益的影响较大,而其它的控制参数对伺服刚度幅值影响不大。
The result presents that the servo rigidity is more influenced by proportion plus of position loop than by other parameters.
介绍了TF 3装盘机电气控制系统所需的印刷直流电动机伺服控制板的研制。
A servo card in PLC for printed DC motor used in TF3 equipment has been developed.
该控制系统以无刷直流电动机为伺服驱动装置,以微型计算机为处理器。
The control system use BLDC motor as servo device, take microcomputer as the processor.
本文将模糊模型算法控制应用于永磁同步电动机位置伺服系统中。
This paper presents a novel and predictive fuzzy model algorithmic control(MAC) scheme which is an integration of fuzzy control and predictive control.
本文采用模糊控制与常规pid控制相结合的方法,设计了步进电动机位置伺服系统。
In this paper, the fuzzy control theory combined with the PID control theory is used to built a stepping motor position servo system.
本文提出了一种新颖的以脉冲序列为位置给定、采用矢量控制方式的永磁同步电动机交流位置伺服系统。
A novel high performance AC servo system with permanent magnet synchronous motor (PMSM) using vector control is presented. A 8096 single chip microcomputer is used as the controller and operator.
基于通量浓度控制技术和范围由DIGIVEX车道,在高压同步伺服电动机是专为常规机主轴摩托的。
Based on flux concentration technology and controlled by the DIGIVEX Drive range, the HV synchronous servomotors are designed for the spindle motorisation of conventional machines.
基于通量浓度控制技术和范围由DIGIVEX车道,在高压同步伺服电动机是专为常规机主轴摩托的。
Based on flux concentration technology and controlled by the DIGIVEX Drive range, the HV synchronous servomotors are designed for the spindle motorisation of conventional machines.
应用推荐