采用伺服控制，实现高精度定位，尺寸准确。
Double servo control, high precision orientation, size more nicety.
执行机构由伺服控制装置推动纠偏辊进行纠偏。
The executing system pushes the roller by servocontrol device to rectify deviation.
系统采用动态热平衡伺服控制策略进行恒温控制。
A dynamic thermal equilibrium servo temperature control strategy is implemented in this system.
本文介绍了实现微操作机器人视觉伺服控制的方法。
This paper investigates the method for implementing visual servo control of robotic micromanipulator.
并且应用该方法实现了稳定的伺服控制，提高了加工效率。
Using this method can realized stable servo-control and higher speed machining.
该设计应用于DVD伺服控制芯片中，达到了预期的性能要求。
This decoder can be used in the DVD servo control chip and meets the requirement of the expected performance.
通过多任务实时软件代替运动控制卡，完成实时伺服控制任务。
Motion control boards were displaced with multitask software to perform the servo controlling motion accurately.
光电跟踪系统中的伺服控制技术是实现高精度跟踪的关键技术之一。
Servo control in optoelectronic tracking system is one of the key technologies to realize the high precision tracking.
本文介绍了该系统纵-横向伺服控制和三割炬伺服控制的方案和原理。
This paper drescthes ibe systematic idea and principle of longitudinal, transverse and three torches space length servo controls.
伺服控制型文变压力试验机将成为国内外交变压力试验机的发展趋势。
Servo control alternating pressure test will be the trend of alternating pressure test in nation and abroad.
准确的定位和编码器是由伺服控制马达以及高精确度的三件希斯耦合。
The positioning and accuracy are controlled by encoders from servo motors as well as a high precision three-pieces Hirth coupling.
现在我们来研究用十字夹头位移或位移夹头伺服控制来完成相同的试验。
Consider now the same test carried out with servo control based on crosshead travel or displacement of the grips.
而相应的插补运算、曲线轨迹规划、伺服控制算法等都由计算机来完成。
And the interpolation arithmetic, curve contrail programming and servo control are done by computer.
介绍了动调式陀螺测斜系统伺服控制再平衡回路的基本原理和工作特点。
Introduced are basic principle and characters of servo rebalance control loop in a dynamically tuned gyro inclinometer system.
对采用电液伺服控制实现加载的力矩负载模拟器进行了深入的分析和研究。
This paper carries out the thorough analysis and research to the momental load simulator by means of electro hydraulic servo control to realize loading.
目前用开关阀实现的气动伺服控制已成为流体动力控制领域竞相研究的对象。
At present, the pneumatic servo control using on-off valves has become a subject researched on competitively in the domain of fluid power control.
无刷直流(BLDC)伺服控制，可选的3相换轨取代传统的霍尔效应传感器。
For Brushless DC (BLDC) servo control, optional 3 phase commutation tracks replace the traditional Hall Effect sensors.
实验结果表明，用高速开关阀可以实现快速、精确的气动执行器位置伺服控制。
The experimental results show that the pneumatic actuator position servo system can be implemented using high-speed switching valves fast and accurately.
利用计算机及液压伺服控制技术，研制了大型液压伺服混凝土静动三轴试验系统。
Large scale static and dynamic concrete hydraulic servo triaxial testing system is designed by using computer and hydraulic servo technique.
该分体式天线座通过伺服控制来实现天线的俯仰和横滚运动，从而准确地指向目标。
The pedestal drives a cuboid antenna, which can pitch and roll to direct at target accurately, and is driven by servo control.
本文提出一种新的模型参考自适应模糊控制器，并应用于步行机器人关节速度伺服控制。
This paper presents a new adaptive fuzzy control scheme and its application to speed servo control for a quadruped robot.
文章从系统角度讨论了卷簧机数控系统的硬、软件构成，界面结构，数据通讯及伺服控制。
In the view of the control system, the paper discuss hardware architecture, software architecture, interface architecture, data communication, and servo control system.
机器人视觉伺服控制是一个具有重要理论研究意义和广阔工业应用前景的基础性研究课题。
Robot visual servo control is a fundamental research subject with very important theoretical research sense and industry application prospect.
本论文正是在电液伺服控制技术的基础上，完成了基于DSP的电液伺服测控系统的研究。
The paper is completed research of measurement and control system based on DSP under technology.
采用全数字技术实现对交流永磁同步电机的伺服控制，并将此项技术应用于工业缝纫机领域。
The full digital technique was adopted to realize the servo control of the ac permanent-magnet synchronous (motor.) the technology was applied in the industrial sewing machine.
以伺服控制为核心的机器人系统，结合相应的误差补偿和控制策略实现了超声检测的自动化。
The automatization of the ultrasonic test system was improved based on the robot technique, error compensate and control strategy.
月球车跟踪装置是一种位于着陆器上，借助于视觉伺服控制来实现对月球车跟踪及导航的装置。
The tracking system of lunar rover is a complex device which track and guide for lunar rover by visual servo control.
纬纱张力系统是一个非线性、时变的系统，针对这一特点，采用模糊pid算法进行伺服控制。
Tension of warp system is time-variant and nonlinear system. According to characteristic of tension of warp system, Fuzzy-PID algorithm is adopted.
台架性能试验验证表明，采用这种伺服控制方式，电动助力转向系统快速回正时的平稳性有所提高。
The bench tests proved that the return ability of the EPS system under rapid steering had been greatly improved by this servo control technique.
台架性能试验验证表明，采用这种伺服控制方式，电动助力转向系统快速回正时的平稳性有所提高。
The bench tests proved that the return ability of the EPS system under rapid steering had been greatly improved by this servo control technique.
应用推荐