利用有限体积法建立了三相异步电机的稳态传热数学模型。
A steady heat transfer mathematic model is established for a three-phase asynchronous motor by using a finite volume method.
在分析了炉子电热特性的基础上建立了石墨化炉传热数学模型。
Based on the analysis of thermal, electric and physical characters of graphitization furnaces, a mathematical model of heat transfer in the furnace was proposed.
该文分别建立了集热棚、烟囱和蓄热层的流动与传热数学模型。
Different mathematical models of flow and heat transfer for the the collector, the chimney and the energy storage layer were developed.
采用拉格朗日随体坐标建立了铝双辊铸轧过程瞬态传热数学模型。
A transient heat-transfer mathematic model was established using a Lagrangian coordinate system in twin-roll aluminum trip casting and rolling process.
本文提出了隧道窑窑车的二维非稳态传热数学模型及计算机程序框图。
Mathematical model and computer programme flow diagram for two-dimensional transient heat transfer in tunnel kilns are presented.
针对某公司环形加热炉的实际生产情况，建立了管坯加热过程的三维传热数学模型。
Considering practical ring shaped heating furnace of a certain company, a threedimensional heat transfer mathematic model for tube rounds heating process was established.
以某一低温实验装置为例，建立其围护结构非稳态传热数学模型，对动态负荷进行计算。
An unsteady thermal conduction model of its envelope was built and the dynamic load was calculated.
从流体微元出发，用计算流体力学（CFD）的方法建立热管生物反应器的传热数学模型。
Using the fluid differential unit, the heat transfer mathematic model of heat pipe bioreactor (HPBR) was established by the calculated fluid hydrodynamics (CFD).
建立了舰船燃气轮机排气引射冷却系统的流动传热数学模型，并用数值方法对其进行计算。
The flow and heat transfer models of a Marine gas turbine exhaust cooling system were established, and the numerical method were presented for the solution of the models.
建立了连铸板坯辊道输送和保温坑保温过程传热数学模型，并用实测数据对计算结果进行了验证。
The mathematical heat transfer model for conveying and insulating process of CC -slab in HCR was established.
建立了连铸坯凝固过程传热数学模型与BP网络预测模型，并根据实测数据对两种模型分别进行了验证。
Heat transfer mathematical model and BP networks prediction model during solidification of continuous casting slab are established and verified with the measured data.
在全面系统分析了某公司钢锭热送热装系统热过程传热机理的基础上，建立了钢锭冷却、加热过程二维传热数学模型。
The two dimensions mathematical model for the hot transferring and charging process of ingot system has been introduced in detail on the basis of the heat transfer theory in this paper.
以推钢式连续加热炉为对象，建立了炉底纵水管自然循环汽化冷却系统的流动及传热数学模型，并根据该模型计算出汽包压力对系统工作指标的影响。
The fluid and heat transfer math model in a steam cooling system with natural cycle has been built up on the pusher reheating furnace.
通过对溴化锂溶液在降膜吸收过程中传热、传质特性的分析，建立了垂直降膜吸收过程的数学模型。
Based on the study of the characteristics of heat and mass transfer of absorption, a numerical model to simulate the process of absorption of LiBr solution is established.
基于质量、动量和能量守恒定律及井筒径向传热理论建立了流体压力、温度分布预测数学模型。
Based on mass, momentum, energy conservation and the theory of wellbore radius heat transmission, established fluid pressure and temperature distribution prediction mathematical models.
在分析浅埋工程围护结构传热机理的基础上，给出浅埋工程围护结构传热的数学模型。
On the basic of mechanism analysis, this paper deduces the mathematics model of heat transfer of shallow buried underground engineering.
建立了含内热源的液池内自然对流与冷却盘管内强制对流耦合传热的三维物理、数学模型，进行了相应的数值模拟计算。
Three-dimensional physical and mathematical models for the coupled heat transfer of natural convection in a liquid pool with heat source and forced convection in cooling coil tube are established.
通过建立全氢罩式退火炉炉内传热过程的数学模型，并经过实测验证后，分析了循环风量与退火时间的关系。
A mathematical model for heat transfer process in HPH furnace was established and verified, then applied to analysis of the relationship between gas flow rate and annealing time.
本文阐述多股流板翅式换热器传热计算中的数据处理、数学模型、计算方法和框图。
This paper describes data processing, mathematical models, calculation methods and flowcharts in the heat transfer calculation for multi - fluid plate-fin heat exchangers.
分析了高风温燃烧系统中陶瓷蜂窝蓄热体和气体间的热量交换，建立了陶瓷蜂窝蓄热体传热过程数学模型。
This paper analyzed the heat exchange between ceramic honeycomb regenerator and gas, and established a heat transfer process mathematical model for ceramic honeycomb regenerator.
针对特殊的醋化反应体系，在现有的醋化反应器传热条件基础上，采用数学模型计算并预测提升冷冻盐水温度的可行性。
Based on the existing heat transfer condition and characteristic acetylation system, we used mathematical model to predict the feasibility of increasing the temperature of freezing brine.
本文在对降膜结晶分离过程进行传热传质分析的基础上，建立了简化数学模型。
Based on the analysis of heat and mass transfer, a simplified mathematical model describing the falling film crystallization process is developed.
给出了推力室内从推进剂雾化、蒸发、燃烧到传热一整套合理的数学模型。
And a reasonable mathematic model about the spray, evaporation, combustion and heat transfer of the propellant in engine is given.
根据多孔介质理论，采用非局域热平衡方法，建立了干熄炉内传热的一维数学模型。
According to porous medium theory, non regional heat balance method is adopted, heat transfer one dimensional mathematical model in CDQ chamber is established.
数学模型在生物传热的研究中占有极其重要的地位，是进行理论探讨和现实应用的共同基础。
Mathematical model is very important to the study of Bio-heat transfer, and it is also the common foundation for both of the theoretical research and practical application.
全面系统地综述了国内外有关干熄炉内流动和传热过程数学模型的研究现状及其发展趋势。
This paper summarizes the research status and development of mathematical model for fluid flowing and heat transferring process in CDQ unit domestically and abroad.
本文通过传热分析，建立了辐射管内温度分布的数学模型。
By analysis of heat transfer process, a mathematical model of the temperature field in radiation tube is presented.
文章阐述了优化加热模型的基本传热学原理，并用数学的方法剖析了此模型的建立过程以及应用到步进式加热炉中数学模型的建立过程。
The basic thermology theory of optimized model is stated, its construction process when used in the model of walking beam furnace is analyzed with mathematics method.
本文介绍了管式加热炉辐射室传热的数学模型和计算方法近来的一些进展。
The mathematical models and calculating methods for radiation heat transfer in furnaces are reviewed.
本文介绍了管式加热炉辐射室传热的数学模型和计算方法近来的一些进展。
The mathematical models and calculating methods for radiation heat transfer in furnaces are reviewed.
应用推荐