这些高科技元件通常由传感器、处理器、无线电模块组成。
These high-tech components normally consist of a sensor, a processor and a radio module.
该公司研发和制造航空器、先进仪器以及用于战略、战术和科学领域的传感器、元件、数据开发系统和射频解决方案。
The company develops and manufactures spacecraft, advanced instruments, and sensors, components, data exploitation systems and RF solutions for strategic, tactical and scientific applications.
可伸缩硅元件的应用覆盖了头戴式电子传感器到可穿戴太阳能电池等各个领域。
Applications for stretchable silicon circuits range from electrical sensors that sit on top of the brain to wearable solar cells.
这个前景非常有吸引力，我们开始着手对这样的传感器元件进行研究，我们制作的传感器非常微小，并且确保彼此之间可以互联。
The vision was compelling, and we started working on elements of that. We made sensors that were really tiny, and we made sure they could network together.
双金属元件是一种最简单和最常见的传感器。
The bimetal element is the simplest and most often encountered sensor.
用途：适用要求较高的微波器件，传感器，滤波器及航天，导弹上应用的元件气密性带压力保护的封焊。
Usage: suitable for air tight seal welding with pressure protection of microwave device, sensor, filter and components that used on spaceflight and guided missile that have high requirement.
GOCE及其传感器、仪表支持系统和控制元件，实际上构成了一个单一的综合重力测量装置。
GOCE, with its sensor, system of supporting instrumentation and control elements, actually forms a single composite gravity-measuring device.
器件本身是类似于光传感器的简单电子元件。
The devices themselves are simple electronic components similar to a photo sensor.
高性能的微型电子元件对于微型传感器的研制是十分重要的。
Miniature electronic components with high performance are highly important for development of miniature sensor.
高灵敏度的氟里昂气体传感器是检测氟里昂泄漏的关键元件，本文叙述了氟里昂气敏器件的制作工艺、敏感原理、测试方法及测试结果。
Freon sensor with high sensitivity is key device for detecting freon leak. The manufacture technology, sensitivity mechanism, measure method and parameter of samples have beendiscribed in this paper.
氧传感器是影响三元催化转化器催化净化效果的一个关键元件。
Oxygen sensor is a key component which affects the purification for three-way catalytic converter.
除了胶结金属薄片的力传感器系列外，我们还开发了一种新型的采用焊接薄膜传感元件的传感器。
In addition to our force transducer program with bonded foils, a new force transducer with a welded thin film sensor was developed.
该泵密封油室内设置有高精度抗干扰漏水检测传感器，及定子绕组内预埋了热敏元件，对水泵电机绝对保护。
The pump seal oil leakage indoor settings are high-precision interference detection sensors, and embedded within the stator windings of the thermal components, absolute protection of the pump motor.
采用拉压力传感器作为扭矩测量元件，提高了测功器的测量精度。
Using the tension-compression sensor as a measuring element of torque, the measuring, precision of dynamometer was raised.
通过对敏感元件的优化设计，改善了传感器的线性度、敏度、度稳定性指标。
The linearity, sensitivity and stability against temperature variation of the sensor are improved by optimizing design to the sensitive element.
传感器由一个发热元件和一支热电偶组成。
The sensor is composed of a heat element and a thermocouple.
利用光纤光栅(FBG)作为基本传感元件，研制了一种基于轮辐式压力盒装置的FBG压力传感器。
A novel fiber Bragg grating (FBG) sensor based on spoke-structure pressure box by utilizing FBG as the element sensing component is presented.
在闭塞传感器的光学元件执行透过手指传送的光敏感测量。
During the occlusion optical elements in the sensor perform a sensitive measurement of the light transmitted through the finger.
许多发电元件传感器可调节操作的距离。
利用霍尔元件设计了霍尔传感器，用于球关节位姿测控系统设计。
A special sensor designed with Hall Elements is used in the position-orientation measurement and control system.
介绍了一种采用压电器件为核心元件的新型冰传感器。讨论了其工作原理、测量电路设计以及测量工作特性。
This paper introduces the study of a new ice sensor based on piezoelectric devices. The paper discusses the work principle, design of circuit and measuring operation characteristics.
介绍了采用负温度系数热敏电阻器为检测元件的风速传感器的测量原理；
The measuring principle of a wind speed sensor which employs a negative temperature coefficient (NTC) thermistor as detector is described.
提出了一种由步进电机、转矩传感器等元件组成的齿槽转矩测试系统。
A cogging torque measurement system was proposed, which was composed of stepping motor, torque sensor, etc.
对锑化铟-铟共晶薄膜磁阻元件的齿轮转速传感器电路进行了研究。
The gear velocity sensor made up of a InSn-In eutectic film magnetoresistor(MR) is studied.
热催化元件是广泛地用于瓦斯检测的一种传感器，其非线性特性影响了瓦斯检测的准确性。
A catalytic sensor has been widely used for methane detection. Its nonlinear characteristic has lowed the accuracy of the methane detection.
在一个实施例中，一种装置设置有光源、光学元件、至少一个光电传感器、和控制系统。
In one embodiment, apparatus is provided with a light source, an optic element, at least one photosensor, and a control system.
系统采用线阵CCD作为传感元件，对传感器的光路结构进行了改进。
The system was equipped with line matrix CCD as sensing unit and improved on light path structure of sensor.
核心检测元件-干湿球传感器。
核心检测元件-干湿球传感器。
应用推荐