传感模块由传感器电路、调制电路和模拟信号开关组成。
Sensor module is composed of sensor circuit, modulation circuit and analog signal switch.
介绍了一种脉冲供电传感器电路，可延长电池寿命至几年。
A type of pulse supplied sensor circuit which can extend the battery lifetime is presented.
对锑化铟-铟共晶薄膜磁阻元件的齿轮转速传感器电路进行了研究。
The gear velocity sensor made up of a InSn-In eutectic film magnetoresistor(MR) is studied.
另外，传感器电路中包含了一个校准电路来提供产生校准参数的校准电流。
In addition, a calibration circuit is incorporated in the sensor circuit for providing calibration current, which is used to generate calibration parameter.
一种附有消毒功能的饮水机控制电路，包括超声波传感器电路和负离子发生器电路。
The utility model relates to a drinking water machine control circuit with sterilization function, comprising an ultrasonic wave sensor circuit and an anion generator circuit.
一种装仓电路和相关方法，其中对来自传感器电路中的列电路的像素信号进行采样和内插。
A binning circuit and related method, wherein pixel signals from column circuits in a sensor circuit are sampled and interpolated.
在控制器设计部分，分别介绍了电源电路、霍尔传感器电路、控制器电路、功放电路的设计过程。
In the controller design section, the design process of the power supply circuit, Hall sensor circuit, control circuit, power amplifier circuit is introduces. iv.
对于照明系统，LED结合智能传感器电路看来是一个很有前途的方法，可以用来解决能耗高的问题。
For lighting systems, LEDs combined with intelligent sensor circuits look to be a very promising method to tackle the issue of high energy consumption.
该传感器由一个精密的，低失调线性的霍尔传感器电路，以及一个位于管芯表面附近的铜质传导通路组成。
The device consists of a precision, low-offset linear Hall sensor circuit with a copper conduction path located near the surface of the die.
介绍该电路的主要工作特性及工作原理，给出利用MC74设计的无线数字温度传感器电路的原理及部分程序代码。
The main characteristic and operating principle of MC74 are introduced, the wireless digital temperature sensor circuits and some of programs based on MC74 are given.
本文针对在压力传感器电路中采用温度硬件补偿措施成本较高且精度不高的情况，建立了RBF网络软件补偿模型。
Aiming at the problem that hardware compensation has the shortcomings of high cost and low precision, a software compensation model based-on RBF is suggested.
分析、比较了几种制作传感器电路的工艺，列出了传感器电路的加工工艺流程，并对主要工艺提出了具体的技术要求。
After some kinds of technology that manufacture the circuit are considered, the process flow and the main technique requirements are presented in the paper.
传感器和电路濒临故障，NASA的专家们意识到他们必须做点什么，否则将永远与探测器失去联系。
Sensors and circuits were on the brink of failing and NASA experts realised that they had to do something or lose contact with their probe forever.
某些传感器自身就具有数据平滑内部电路。
Some sensors have their own data smoothing internal circuitry.
此次佳能通过改进读取电路的时序控制方法，成功实现了传感器信号的高速读出。
By modifying the method employed to control the readout circuit timing, Canon successfully achieved the high-speed readout of sensor signals.
；给乔治·史密斯和韦拉德·博伊尔两人的颁奖致辞，“发明成像半导体电路--CCD光学传感器。”
Smith and Boyle were honoured "for the invention of an imaging semiconductor circuit – the CCD sensor".
InVisage的方法是将表面涂有量子点的芯片传感器置于电路之上。
InVisage's approach is to build the photodetector out of quantum dots on the surface of a chip, above the circuitry.
由于提供了数字输出，数字传感器不需要外部电路进行线性化和数据转换。
By providing a digital output, digital sensors do not require external circuitry for linearization and data conversion.
其中包括了结构设计、传感器及其测量电路设计、控制系统设计及软件设计。
The method includes configuration design, sensor and testing circuit design, controlling system design and software design.
本文介绍了一种实用的用于电桥测量的传感器接口电路。
A practical interface Circuit for transducers based-on bridge measurement is described in this paper.
针对水轮机主轴扭矩检测系统中的光栅扭矩传感器，设计了一种新型电路。
A new circuit used for the grating torque sensor of hydraulic turbine's principal axis system is designed.
通过研究设计了可用于温室土壤水分的测量系统，介绍了其方案设计、电路设计和传感器的选择等问题。
A system measuring soil moisture in sunlight greenhouse is studied and designed in the paper and the plan design, circuit design and choice of sensor are introduced.
传感器和数字电路之间的最大区别就在于要保证最大的感光面积。
The biggest difference between sensor and digital circuits lies in the need to guarantee the maximum in light-sensing surface area.
基于MR阻尼器的半主动悬架系统主要由MR 阻尼器、弹簧、传感器、控制器及相关辅助电路构成。
In general, a semiactive suspension system based on MR dampersmainly comprises MR dampers, springs, dynamic sensors, semiactive controller andrequired circuits.
此外，设计并应用了电位控制和测量电路，实现了对传感器的电位控制以及输出信号的处理。
Moreover, the potential control circuit and signal measuring circuit are designed and applied in controlling potential and processing the output signal of the sensor.
介绍压力传感器的信号调节电路设计方法和测量误差的软、硬件补偿技术。
This paper discusses the design method of signal conditioning circuit and Compensating technology of measuring error in using hardware and software for the pressure sensors.
本文主要介绍这种电容式传感器的结构、工作原理和电路设计。
This article mainly introduces this capacity sensor's structure, the principle of work and the circuit design.
综述了集成电路技术在生物传感器微型化、集成化方面的应用。
Applications of integrated circuit manufacturing techniques for the miniaturization and integration of biosensors are reviewed.
综述了集成电路技术在生物传感器微型化、集成化方面的应用。
Applications of integrated circuit manufacturing techniques for the miniaturization and integration of biosensors are reviewed.
应用推荐