作为颅内压无线监护仪中首要的组成部分，传感器放大电路及其附加电路发挥着相当重要的作用。
As the essential part of the wireless intracranial pressure monitor, the sensors amplifier circuit and other associated circuits play a very important role.
应用包括传感器放大器，直流放大块，和所有的传统运算放大器，现在可以更容易地在单电源电压系统实现电路。
Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems.
在单传感器和三传感器设计中，传感器产生的微弱信号都会被放大。
In both single sensor and triple sensor designs, the weak signal created by the sensors is amplified.
电传系统将所有传感器的信号放大并整合后得出压力信息，并持续的实时显示出来。
Electronic systems amplify and integrate the signals from all the sensors, producing pressure information that can be displayed continuously online.
当发射光照到相机的传感器上时，每个像素点抓取一个特定的波长，并对匹配波长的光线进行电子放大。
When reflected light hits the camera's sensor, each pixel picks up its dedicated wavelength, and is given an electronic boost of a matching wavelength.
系统的光电传感器包括二极管泵浦激光指示器和远距离电子放大前视红外热像仪。
It has EO sensors, including a diode pumped laser designator and a long-range zoom FLIR.
当发射光照到相机的传感器上时，每个像素点抓取一个特定的波长，并对匹配波长的光线进行电子放大。 从仅有几个光子的微弱的原始信号，放大到可见的强度。
That amplifies the original dim signal, composed of just a few photons, until it becomes visible.
这项技术被称为STEAM，即连续时间编码放大照相机。 它用一束红外激光照射物体，变换一系列不同的波长，每一个对应着传感器上的一个像素点。
The technology is dubbed STEAM, short for serial time-encoded amplified microscopy.
通过调解镜头中和传感器底部的水压就能完成改变摄像头放大率的功能。
Modulating the water pressure in the lens and below the sensors, makes it possible to produce a variety of magnifications.
其他的一些改善这个问题的工作包括在传统胶卷上使用超灵敏的化学感光物质，或者对数码相机的光电传感器捕捉到的信号进行放大。
Workarounds include the use of extra-sensitive chemicals in traditional films, or amplification of signals captured by the photoelectronic light sensors of digital cameras.
设计出传感器输入输出信号调理电路和试验台架液压激振系统、磁流变阻尼器控制器的功率放大电路。
Design the signal adjust circuit for sensor, and the power amplification circuit for the hydraulic pressure system of test platform and the controller of magnetorheological dampers.
传感器产生的信号常很小，需要放大，或者产生的信号和形式被系统的其它部分处理之前需要再次转换。
Transducers often produce very small output requiring amplification, or they may generate signals in a form that needs to be converted again before being handled by the rest of the system.
提出了应用差动放大理论和灵敏度不同的传感器来完成强噪声环境下微弱声信号提取的方法。
A method of sound detection under strong noise conditions is advanced applying the theory of differential amplifier and utilizing transducers having different sensitivities.
对激光基准信标仪中所采用的液体摆角传感器的结构进行设计，分析其工作原理、放大电路。
The construction of the liquid angular sensor in the laser beacon is designed, the work principle and magnify circuit are analysed.
用户根据需要，选择相应的传感器及合适的放大电路，即可制成各种专用的电话报警电路。
According to needs, users only choose corresponding sensors and suitable amplification circuits, then special alarm circuits of all kinds can be made.
这时传感器输出电信号，经整流放大，改变线圈上的电流，直至线圈回位，其电流强度与被称物体的重力成正比。
Then the sensor output signal, amplified by the rectifier to change the coil current until the coil back to bit, its current strength and the object's gravity is called proportional.
设计了基于模拟滤波器和基于数字锁相放大技术的两种红外气体传感器的信号处理方法。
Two signal processing methods, one based on analog filters, the other based on digital lock-in amplifying technique, are developed and analyzed.
利用光电位置传感器和二维双光杠杆放大，能够测量出二维微小距离的变化。
The change of two dimensional micro distance is measured by using a position sensor and the two dimensional amplification of double optical lever.
PGA309作为数字化可编程信号调理芯片，主要用于电阻桥式压力传感器，将微弱的传感器桥路信号进行放大输出。
As a digital programmable chip of signal conditioning chip, PGA309 is mainly used in resistance bridge pressure sensors, it amplifies and outputs the weak signal from the sensor.
设计一种用于检测某种DNA杂交反应的石英晶体传感器及其放大、显示电路。
The paper descibes the design of a quartz crystal sensor for the detection of DNA hybridization reaction.
测试结果表明，两种传感器都具有线性的输出特性，且带有位移放大机构的电场传感器具有更高的灵敏度。
The test results show that both of the two sensors respond to an external electric field linearly, but the sensor with amplification-compliant micro-transmissions has higher sensitivity.
介绍了信号放大、滤波和传输以及传感器外壳设计和传感器的标定方法。
The methods of signal's amplification, filtering and transmission as well as the design of sensor's shell and the calibration of sensor are introduced.
最后，设计并研发整个仪器，系统包括半导体激光器、测量传感器、放大电路模块、单片机系统、LCD显示模块和供电模块。
At last, the whole instrument is designed and realized, that includes the LD, PSD, the measure sensor, magnified circuit, single chip, LCD screen and power module.
该图像传感器集成了一个可编程偏移和增益为每32LVDS输出通道放大器。
The image sensor integrates a programmable offset and gain amplifier for each channel of the 32 LVDS outputs.
介绍了一种新型带放大器的压杆式压电压力传感器。
A new type of piezoelectric pressure gauge with an amplifier is presented.
文中专题讨论了一种酒精气敏传感器的工作原理、放大电路设计和实验。
This text mainly discusses the working theory of alcohol gas sensor and amplifier design and experiment.
光纤背向散射效应直接应用于光纤拉曼放大器和分布式光纤拉曼温度传感器系统。
The backscattering effect of optical fiber has been applied to fiber Raman amplifier and distributed optical fiber Raman temperature sensors system.
目的研究“酶生物信号放大系统”用于放大dna压电传感器检测信号的可行性和有效性。
Objective to research on the possibility and the efficiency of the enzyme biological signal amplification system applied to DNA piezoelectric biosensor.
该系统主要由电动执行机构、高压油泵、盘式制动器、压力传感器、放大器、接口电路、计算机及打印机等组成。
The system is composed of the electro-actuating mechanism, oil pump of high pressure, disc brake, pressure sensor, amplifier, interface circuit, computer and printer.
该系统主要由电动执行机构、高压油泵、盘式制动器、压力传感器、放大器、接口电路、计算机及打印机等组成。
The system is composed of the electro-actuating mechanism, oil pump of high pressure, disc brake, pressure sensor, amplifier, interface circuit, computer and printer.
应用推荐