此次佳能通过改进读取电路的时序控制方法，成功实现了传感器信号的高速读出。
By modifying the method employed to control the readout circuit timing, Canon successfully achieved the high-speed readout of sensor signals.
详细介绍了传感器的结构、工作原理、工作模式的选择以及信号检测电路。
Details of the sensor's structure, its working principle, the selection of working mode as well as the signal processing circuit is presented.
介绍压力传感器的信号调节电路设计方法和测量误差的软、硬件补偿技术。
This paper discusses the design method of signal conditioning circuit and Compensating technology of measuring error in using hardware and software for the pressure sensors.
此外，设计并应用了电位控制和测量电路，实现了对传感器的电位控制以及输出信号的处理。
Moreover, the potential control circuit and signal measuring circuit are designed and applied in controlling potential and processing the output signal of the sensor.
设计出传感器输入输出信号调理电路和试验台架液压激振系统、磁流变阻尼器控制器的功率放大电路。
Design the signal adjust circuit for sensor, and the power amplification circuit for the hydraulic pressure system of test platform and the controller of magnetorheological dampers.
传感模块由传感器电路、调制电路和模拟信号开关组成。
Sensor module is composed of sensor circuit, modulation circuit and analog signal switch.
针对磁通门传感器检测到的环境磁场强度信号，运用谐波选择法，设计了磁通门信号处理电路。
This paper adopts harmonic choice method to design fluxgate signal processing circuit in allusion to the environment magnetic field strength signal of fluxgate sensor detecting.
PT100温度传感器和精密电阻构成的电桥测量电路输出微弱的电压信号。
The electrobridge measurement circuit, which consists of PT100 temperature sensor and precise resistance, outputs slight voltage signals.
该系统由光纤传感器、信号检测电路、单片机处理电路和显示装置组成。
This system is constituted with the optical fiber sensor, signal detection electric circuit, single chip processing circuit and display unit.
设计了超声波传感器及信号转换与处理电路，并设计了相应的检测软件，在此基础上进行了浓度检测实验。
The ultrasound sensor, the signal transform and treatment circuits are designed. The testing software is developed. Then the experiments for the concentration testing are made.
介绍了聚偏氟乙烯(PVDF)压电薄膜传感器的工作原理，并设计了相应的信号处理电路。
The work principle of the PVDF piezoelectric-film sensor was presented, and the design of its signal processing circuit was also discussed.
这种将传感器输出转换成电压信号，并与系统的其它电路相连接的过程，称为信号调理。
This process of converting the transducer output into a voltage signal which can be connected to the rest of the system is called signal conditioning.
针对采用的生物传感器内阻高、信号弱、双极性等特点，用预处理电路对模拟信号进行了变换。
A preprocessing circuit is designed for analog signal transformation because of large inner impedance of biosensor and bipolar signal.
该系统由水泵试验台、传感器、信号调理电路、数据采集卡、计算机处理几个部分组成。
This system consists of: pump test bed, sensors, signal processing circuit, data-collecting card, computer processing.
介绍了本课题中采用的电子鼻硬件系统的三个组成部分――传感器阵列、信号调理电路和数据采集卡。
Then the three key parts of electronic nose: sensors array, signal amplification circuit and AD board are also introduced.
传统磁通门传感器主要采用模拟电路进行信号处理。
Traditional fluxgate adopts analog circuit to process its output signal.
硬件部分包括各传感器信号调理电路模块以及由AD 574a, 89c 52,8255 A等构成的主板模块。
Its hardware interface includes sensor signal condition circuits and the motherboard constructed by AD574A, 89c52, 8255a, etc.
该电路特别适合于电阻式传感器的信号处理。
This converter is therefore suitable for signal conditioning of a resistive sensor.
该系统由心音传感器、心音信号采集处理电路及计算机组成。
It consists of a phonocardiogram sensor, a heart sound collecting and processing circuit, and a computer.
音频检测系统主要由脉冲激励装置、音频传感器、信号调理电路、数据采集卡和微型计算机等部分组成。
The audio frequency inspection system is mainly composed of the impulse excitation device, acoustic sensor, signal conditioning circuits, data acquisition card and micro-computer and so on.
系统包括传感器、信号处理电路和自检测系统；
The system comprises accelerometer, signal processing circuit and self-test system.
该装置包括棉层横向不匀检测传感器、信号处理电路、单片机处理系统和执行机构等部分。
The device consists of cotton layer testing sensor, magnification and filter circuit, single chip processing system and performing unit.
该系统由传感器、信号处理电路、微型计算机及记录装置组成。
This system is composed of sensors, the signal processing circuit, micro-processor and recording device.
完成了偏心传感器探头的设计并解决了偏心传感器振荡电路的电源供应问题和信号从旋转部件到静止部件的传输问题。
The probe of the eccentricity sensor is designed. The problems such as power supply needed by oscillating circuit and signal transmission from rotary part to stationary part are solved.
对传感器信号处理采用的二次谐波反馈电路，电路为闭环系统。
Adopting the reactive circuit of twice harmonic to process the sensor signal, the system is closed loop.
发动机传感器的测试是进行控制和诊断的基础，故有必要对传感器输出信号的性质、特征及电路加以阐述。
Testing of the engine sensor is base for control and diagnosis, thus, it is necessary to expound the characters, features and circuit of the sensor output signal.
该系统是以MSP430F 449为核心，包括附叶式传感器，信号处理电路，液晶模块以及键盘模快以及报警设施。
The core of the system is MSP430F449, including peculiar sensors, signal process circuits, LCD modules, key modules and some alarms.
重量传感器输出的信号经信号调理电路输入6024E的模拟通道，经计算机分析处理；
The signal output from the weight sensor is transmitted to one of the analog channels of PCI-6024E board by conditioning circuit.
面阵图像传感器的读出电路和信号采集电路是影响图像信号性能的关键部分之一。
Readout circuit and image acquisition circuit of the array image sensor are the key factors for the image signal performance.
传感器信号调理是对传感器直接输出的信号进行调节，信号调理的原理以及硬件实现电路在文中都做了说明。
Sensor signal adjustment is used to adjust the direct output signal of sensors. The principle of signal adjustment and the hardware circuit implementation are both discussed in this paper.
应用推荐