介绍了小电容量的电容传感器信号调理的一种新方法。
A new method of sensing signal conditioning for small capacitance transducer is introduced.
研制了一种基于PCI总线的电感传感器信号采集卡。
A signal acquisition card for inductance sensor based on PCI bus is designed in this paper.
标定时可根据仪表显示的传感器信号电压进行系统检测。
While adjusting, it can measure the system according to the voltage of sensor signal that the instrument shows.
该文根据传感器信号输出的特点，进行数据采集的处理。
According to the characteristics of sensor signal output, data acquisition of treatment.
在多路传感器信号处理的过程中，会遇到多通道对准的问题。
In the processing of multi channels sensor signal, the problem of multi channels alignment may be confronted.
对传感器信号处理采用的二次谐波反馈电路，电路为闭环系统。
Adopting the reactive circuit of twice harmonic to process the sensor signal, the system is closed loop.
所设计的电路解决了电子皮带秤中传感器信号的远距离传输问题；
The circuit was designed to solve this problem: the sensor signals of long-distance transmission in the electronic belt scale.
传感器信号以这样一种方式影响变频器，使牵引箔的速度保持不变。
The sensor signal affects the frequency converter in such a way that the draw-off speed of the foil remains constant.
介绍航天机器人用六维腕力传感器信号处理系统的硬件、软件构成。
This paper introduces the composition of the signal processing system of six - axis-force sensor used by aeronautic robot.
此次佳能通过改进读取电路的时序控制方法，成功实现了传感器信号的高速读出。
By modifying the method employed to control the readout circuit timing, Canon successfully achieved the high-speed readout of sensor signals.
风压控制中采用了PID控制算法，对传感器信号进行了非线性补偿。
Adopt PID's control algorithm in the wind pressure control, has been underway the nonlinear compensation to the sensor signal.
对传感器信号及传感系统噪声进行了分析，提出了减小噪声的各种方法。
In this thesis we analyze the sensing signal and sensor system noise, and bring forward methods of decreasing noises.
阐述了一种新型基于充放电原理的高分子电容式湿度传感器信号处理方法。
This paper describes a new signal processing of macromolecule capacitance humidity sensor based on the charge-discharge principle.
针对传感器信号中存在的非线性误差，介绍了硬件补偿和软件补偿两种方法。
Hardware compensation and software compensation methods for nonlinearity in the sensor signal are introduced.
一旦射频设备收集的信号从模拟到数字的格式转换之后，后端处理器将对传感器信号进行分析。
Back-end processors are used to analyze sensor signals, once they have been converted from analog to digital formats, that have been collected by the RF devices.
在分析传感器信号的基础上，用SD- 380动态分析仪对信号作了频谱分析。
Based on the analysis of the sensor signal, the frequency spectrum is analyzed with SD-380 dynamic analyzer.
该系统能够实现对96路传感器信号的采集，并能够监测到工作环境的温度和湿度。
This system could collect sensors signal of 96 channels, and gathered signal of environment temperature and humidity.
在深入分析汽油机进气压力传感器信号的基础上，基于频谱特性确定了信号采集算法。
After analyzing the signals of the manifold pressure sensor, the sampling algorithm is received by the spectrum characteristics.
利用ZMD31020传感器信号处理器，实现了硅压阻式传感器的非线性及温度补偿。
The ZMD31020 is a special sensor signal processor optimized for piezoresistive sensor nonlinearity and temperature compensation.
它根据火焰辐射的光谱特征，利用多个红外传感器信号的特征与相互关系识别火焰信号。
Based on the spectral characteristics of flame radiation, the detector USES the characteristics and the correlation of data received by these infrared sensors to achieve fire determination.
然后分析了各种数字滤波方法的特点，针对传感器信号的特点进行处理，并建立了数学模型。
A mathematic model is built after analyzing various kinds of digital filtering and processing the signal of sensor.
本设计使用汇编语言进行了各个模块软件的设计，完成对传感器信号的处理和CAN模块报文的发送和接收。
And it USES ASM language to develop the software part to handle sensor signals and accomplish the transmitting and receiving of CAN messages.
在此背景下，本文尝试综述声矢量传感器信号处理研究的当前进展，如信号检测、DOA估计、波束形成等。
Under this background, we try to review recent progress in study on acoustic vector sensor signal processing, such as signal detection, DOA estimation, beamforming, and so on.
传感器信号调理是对传感器直接输出的信号进行调节，信号调理的原理以及硬件实现电路在文中都做了说明。
Sensor signal adjustment is used to adjust the direct output signal of sensors. The principle of signal adjustment and the hardware circuit implementation are both discussed in this paper.
对于开发出成熟的光纤技术产品来说，将经典的相关运算理论运用在光纤传感器信号的实际处理中具有重要意义。
Applying the classical theory into the signal disposal of the fiber Bragg grating sensors is very great significance for developing the mature fibre technology product.
在以CPU3为核心的数据采集模块系统中，设计了传感器信号发生、调理电路及由计数器组成的数据采集电路。
In the module system of data gathering taking CPU3 as the core, the article describes the circuit of signal-arising of sensors, signal-converting of sensors, and data gathering using counters.
硬件部分主要功用是获取压力传感器信号、氧传感器信号以及催化器前后端的废气成分，并把数据实时的传输给电脑。
The main function of hardware component is to obtain the signals of pressure sensor signal, oxygen sensor signal and the front and back emission components of catalytic converters.
在硬件设计方面：为了提高灵敏度，通过数学推导设计传感器信号变换电路中的各个参数，并给出了各参数的求取公式。
As for hardware design, in signal converter, in order to improve sensitivity, the parameter of signal converter is gotten through math illation.
M8系列传感器连接器(以下简称“连接器”)广泛应用于各种传感器信号连接，作为精密设备动作信号及信息传输之用。
M8 series sensor connector (hereinafter referred to as "connector") is widely used in all kinds of sensor signals connected, as precision equipment action signal and information transmission with.
该系统通过PIC单片机对多路漏水传感器信号进行实时检测与处理，并将结果通过通信实时传送给上位计算机进行决策控制。
Using PIC single chip computer, the system can make real-time detection to multiplexer channel leak sensor signals and deal with them, then send the result to computer to make decision.
应用推荐