传感元件将会直接接触表面；
控制室温所需要的那种传感元件称为恒温器。
The sensing element necessary for controlling room temperature is called a thermostat.
传感元件本身被弹簧更大冲击/振动耐久性暂停。
The sensing element itself is suspended by springs for greater shock/vibration durability.
传感元件为两套楔角相同的左旋和右旋石英光楔。
The sensor consists of two sets of quartz wedges which are respectively right-handed and left-handed with equal angle.
因此，此电路特别适用于电阻式传感元件的信号处理。
The converter is therefore suited as a signal conditioner of a resistive sensor.
本文介绍了圆形膜片E型杯硅微压传感元件的设计原理。
This paper presents the designing theory of a circular E-type silicon micro pressure sensor.
传感元件与复合材料的一体化是智能结构研究的最终目标之一。
One of the final research goals for smart structures is to integrate sensing elements with composite materials.
在材料和结构的制作过程中，将传感元件和驱动元件埋入其中。
We can imbed sensor elements and drive elements in the material and architecture with its production.
机电仪表示一种电表，因为仪表读数在传感元件电阻中变化多样。
The electromechanical gauge ACTS as an ammeter because the gauge reading changes with variations in the sender unit resistance.
一般而言，可提供传感元件和用于维持该传感元件的传感器外壳。
In general, a sensing element and a sensor housing can be provided for maintaining the sensing element.
系统采用线阵CCD作为传感元件，对传感器的光路结构进行了改进。
The system was equipped with line matrix CCD as sensing unit and improved on light path structure of sensor.
对离子束蚀刻深度传感器敏感元件与传感元件间的耦合问题进行了探讨。
The coupling problem between sensitive element and sensing element in etching depth sensor is discussed.
该实用新型的特点是在一个合金丝是用来作为传感元件，这是他们与春天。
The utility model is characterized in that an alloy wire is used as a sensing element which is connected with a spring.
介绍了一种以悬臂梁为基底，单光纤光栅为传感元件，测量温度和压力的方法。
A temperature and pressure measurement method is introduced, which is based on a cantilever with single fiber Bragg grating as the sensing element.
一个传感器封装件一般包括一个基底和一个或多个位于基底的表面的传感元件。
A sensor package generally includes a substrate and one or more sensing elements, located on a surface of the substrate.
提出了利用传感元件自身特性实现温度补偿的算法以及对系统非线性补偿的算法。
A temperature compensation algorithm according to the behavior of the inductance sensor, and a nonlinear compensation algorithm are designed.
故障判断屏，通过一系列传感元件和计算机系统诊断主机一般性故障并报警显示等。
The fault distinguish screen can diagnose plain faults of the main machine and start alarm function by series of sensing elements and compute program.
对智能柔性结构的传感元件、驱动元件、控制系统以及应用进行了分析和论述。
The sensors, actuators, control system and applications of intelligent compliant structures are discussed.
实验结果表明，埋入的超弹性传感元件可对结构的裂纹、断裂特性及强度等进行监测。
Research results show that NiTi superelastic wires embedded in structures can monitor fracture behavior and strength in the structures.
详细介绍了以PSD为传感元件的石英摆片综合参数测试系统的测量原理、光路和电路。
The structure, measurement principles and hardware of the application system of PSD are introduced in detail.
该装置包括一个传感元件和IC的界面，通过I2C或SPI从感测元件的应用进行通信。
The device includes a sensing element and an IC interface that communicates through I2C or SPI from the sensing element to the application.
并针对硅微压传感元件研制中存在的问题，提出采用化学腐蚀技术，选择性腐蚀工艺控制膜厚。
In view oi the problems existing in the silicon micro pressure sensors, this paper proposes the chemical etching techniques and the selective etching processes to control diaphragm thickness.
除了胶结金属薄片的力传感器系列外，我们还开发了一种新型的采用焊接薄膜传感元件的传感器。
In addition to our force transducer program with bonded foils, a new force transducer with a welded thin film sensor was developed.
一个盖帽，比如玻璃盖帽，与基底接合，从而盖帽和基底界定了一个容纳传感元件的密封谐振腔。
A lid, such as for example a glass cap, is coupled to the substrate such that the lid and substrate define a sealed cavity accommodating the sensing element (s).
利用光纤光栅(FBG)作为基本传感元件，研制了一种基于轮辐式压力盒装置的FBG压力传感器。
A novel fiber Bragg grating (FBG) sensor based on spoke-structure pressure box by utilizing FBG as the element sensing component is presented.
对于涂覆长周期光纤光栅(LPG)传感元件，涂覆层折射率大于包层折射率时将具有很高的灵敏度。
As the refractive index of the overlay is higher than that of the cladding, the Long Period fiber Grating (LPG) element exhibits high sensitivity.
研究表明，以一定方式埋入结构的超弹性传感元件可较好地实现对结构冲击位置和程度等响应的监测。
Methods and reliability of structural health monitoring utilizing the large strain and electric property of shape memory alloy's superelasticity were studied by low velocity impact test.
本文介绍了采用负温度系数热敏电阻作为温度传感元件的冷库温度自动监控仪的电路设计及其工作原理。
This paper presents the working principle and electronic circuits of an automatic temperature monitor for refrigerating storage applications with the NTC thermistor as its sensing element.
用少量的短电阻丝的布置方案，实施了五点法传感元件的布置，运用经典模式识别方法实现了载荷定位；
In this study, the monitoring objects are the load and impact in structural of fiberglass complex by adopting PZT and resistance wires as sensors.
用少量的短电阻丝的布置方案，实施了五点法传感元件的布置，运用经典模式识别方法实现了载荷定位；
In this study, the monitoring objects are the load and impact in structural of fiberglass complex by adopting PZT and resistance wires as sensors.
应用推荐