讨论了谐波齿轮传动误差的产生机理。
The mechanism of transmission error of the harmonic gear drive is dealt with.
齿轮瞬时传动比和齿轮综合传动误差。
辊间差采用齿轮传动，无传动误差，控制胶量方便，使用寿命长；
The spreading rollers are driven by gear, giving good stability and enjoys long life.
利用闭环控制技术，减小机组的传动误差，提高了控制精度与稳定性。
The Closed loop control technique is managed for lessening transmission error, increasing the precision and stability of the tobacco machine.
利用闭环控制技术，减小机组的传动误差，提高了控制精度与稳定性。
The Closed loop control technique is managed for lessening transmission error, increasing the precision and stability of the tob...
从模拟后的补偿结果分析了数字式测量的系统误差对传动误差补偿效果的影响。
According to the results of compensation simulation, the effect of system error of digital instruments on the transmission error is discussed.
本文介绍了这种算法的原理和实现方法，并在滚击机分度传动误差控制中得到成功应用。
The principle and applied method are intro duced and the algorithm is successfully applied to a gear hobbling machine.
用微型计算机和光栅传感器组成的仪器可在现场测量并分析各种传动比齿轮传动链的传动误差。
An instrument based on microcomputer and grating tensor can be used to test and analyse the gear-driven error of various ratio gear trains on the spot.
提出了运动优化的方法，通过预设传动误差抛物线函数，使齿面啮合时运动误差和不连续性减至最小。
The motion optimization method is proposed, by which transmission errors anddiscontinuousness of tooth surface meshing is decreased to minimum.
机器人连杆的加工误差、温度变化以及机械传动误差等诸多因素会导致机器人抓手的位置和姿态产生误差。
The position and orientation errors of the robot end effector are caused by a number of factors such as tolerances in manufacturing and assembly, mechanical transfer errors and so on.
该生产线的冲齿机的工作原理及传动参数设计、本文作了介绍。对传动链总传动误差值的确定，也作了原则性的说明。
This paper introduces the operation principle of the MCC punching machine and the gearing parameters, explains how to determine the total driving error of the gearing chain.
在此基础上建立了求取齿轮副传动误差和齿面接触点的数学模型，提出了分析齿轮传动误差和接触区域的仿真算法，并编制了相应的计算程序。
On the basis of it, the mathematical models of driving error and contact point are set up, then the emulation algorithm is put forward and the program is worked out.
文章分析了伺服系统中精密齿轮传动装置总传动比、传动误差、传动回差对整个系统的精度影响，提出传动装置各级精度分配时应注意的问题。
In this paper, the accuracy influences of general gear ratio, transmission error and driving backlash on servo system were analyzed, and some measures of gear ratio distribution were presented.
本文综合运用了齿轮啮合理论，并以磨齿加工为例，系统地研究了与渐开线性质有关的齿轮加工误差产生的啮合机理，并将其概括为传动误差、回转轴相对位置误差及刀具误差。
The machining errors of gear that relate to the nature of involute are studied with gear engagement theory and combining grinding-machining in this paper and they are summarized as transmissio.
采用单向趋近定位方法，避免传动系统反向间隙而产生的定位误差。
The positioning method, avoid approaching the one-way transmission system from the reverse clearance positioning error.
弹筒式直结主轴：主轴与主轴马达为减少传动连结所产生的误差与震动，采用一体式直接设计，并采用高精密abect。
Barrel type straight spindle: spindle and spindle motor to reduce the transmission link error and vibration, the use of integrated direct design, and the use of high precision ABECT.
从理论上推导出环境温度对传动精度造成的误差，并给出实际测量结果，为有关的工程设计提供理论依据。
This paper derives theoretically errors in drive accuracy caused by ambient temperature and gives practical measurement results, making theoretical basis for further engineering designs.
偏心渐开线齿轮传动设计的纯滚动模型、等转角模型和等分模型存在模型误差。
The pure rolling model, equal turning Angle model and bisection model for the design of eccentric involutes gears transmission have model error.
切割机传动系统采用进口齿轮、齿条，切割精度完全达到往返原点零误差。
Cutting machine transmission system adopts imported gear, rack, cutting precision to achieve zero error.
文中还分析了进给传动链的瞬态响应、稳态误差以及加于传动链上的犹动对加工精度的影响。
In this paper, it is researched that the transient response, the static accuracy and the disturbance exert an influence on the working accuracy.
利用最小有向距离原理，提出了斜航式法向圆弧锥齿轮传动的误差分析仿真算法。
Based on the principle of "minimal orientation-distance", an emulation algorithm of error analysis is put forward for transmission of loxodrome normal circular-arc bevel gear.
介绍了螺纹磨床传动链误差测量和分析的方法。
This article introduces the methods for measuring and analyzing errors in driving chain of thread grinding machine.
以阿克曼原理为基础，分析传统转向梯形机构的传动，指出其原理误差存在的原因；
The transmission of tradition steering echelon mechanism is analyzed by the aid of the principle of Ackerman, and the existed theory error is pointed out.
这种误差对传动系统的精度与动态特性(特别是振动与噪声)有直接的影响。
It directly influences on the accuracy of drive systems and dynamic characteristics, especially vibration and noise.
齿轮的齿形误差是影响齿轮传动噪声的主要因素。
The profile error of gears is the main factor of gear transmission noise.
用齿面接触分析法求解了存在制造误差时修形传动的齿面接触状态和运动精度。
The tooth contact and kinematic precision of the modified worm gearing with manufacturing errors has been investigated by the TCA method.
在研究滚刀加工不同齿数带轮所形成的误差分布规律及误差对带与轮啮合传动影响的基础上，确定了滚刀可加工的齿数范围与参数。
At the basis of distribution law of error formed by the processed pulley with various teeth and its effect on transmission, the scope of tooth of pulley processed is defined.
分析了多边形效应对同步带直线传动移动误差的影响，得出误差计算的表达式。
The influence of polygon effect on the displacement error of timing belt linear transmission was analyzed, and an error expression was obtained.
分析了多边形效应对同步带直线传动移动误差的影响，得出误差计算的表达式。
The influence of polygon effect on the displacement error of timing belt linear transmission was analyzed, and an error expression was obtained.
应用推荐