传动杆：可摆动的杠杆，与引擎之活塞相连，用以向机轴传送能量。
An oscillating lever connected to an engine piston rod and used to transmit power to the crankshaft.
本实用新型涉及一种气囊式运动飞碟，是由气囊、动力电机、两旋翼、传动杆等组成。
The utility model relates to an air sac type sport flying disc, which is composed of an air sac, a power electric motor, two rotary wings, a drive rod, etc.
在刹车传动杆上设有与油门传动杆相适配的限位挡板，刹车传动杆的上端与车体相接。
A limit baffle plate which is matched with the accelerator transmission bar is arranged on the brake transmission bar, and the upper end of the brake transmission bar is connected with a vehicle body.
该调速器不仅较好地解决了电-机位移转换的可靠性问题，同时有效地取消传动杆件和减少传递环节，机构简洁。
This speed governor not only can solve the reliability of the transformation of power to mechanical displacement, but also can effectively cancel the transmission bar and reduce delivery link.
使用滚柱挺杆或滑动挺杆来传动旋转凸轮轴做上下快速提升动作（开启和关闭发动机的进气阀和排气阀）的现代型汽车发动机似乎不会出现上述自动熄火的情况。
Modern car engines that use rolling or sliding tappets for transmitting the rapid up-down lifting motion of the spinning camshafts—to open and close the engine’s inlet and exhaust valves—seem immune.
在新兴的无杆式飞机牵引车领域中，液压传动的优越性尤为突出。
The advantages of hydrostatic transmission is especially outstanding in the field of towbarless aircraft tow tractor.
扫描仪传动机构上的滑动杆是我们要注意情况的另外一个重点。
Scanner drive mechanism on the slider is the case we must pay attention to another key.
磨头座、滑动系统采用进口的双直线导轨、双滚珠丝杆传动，以达到运行速度平稳、消除移动间隙(位移)。
Grinding head on, sliding imports of dual-use system linear guide, two-ball screw drive, to achieve the smooth running speed to eliminate mobile space (displacement).
洁净环保：采用丝杆齿轮传动，抛弃传统液压设计，工作环境洁净环保。
Environmental clean: using screw gear transmission, discard the traditional hydraulic design, working environment, environmental clean.
基于改善动力学性能、提高输出运动的平稳性，实现了六杆双输出函数脉冲发生机构按传动比要求的等价四杆机构的综合原理与方法。
To control and improve the properties of mechanism dynamics, a synthetical parameter model of high-grade motion was created for three-grade functional generator mechanism with double output.
旋转变频调速，驱动伺服电机或步进电机，传动滚珠丝杆。猈。
Rotate frequency conversion regulating speed, drive servo motor or stepper motor, drive ball screw.
TJ-18型地面加料机其挑杆回转运动与上下摆动运动采用了液压传动，设备重量轻，结构紧凑、动作灵敏、操作方便。
Rotating and up-down swinging of the ram for TJ-18 groundcharger are hydraulically driven, which can reduce the weight of equipment, make structure contact and be convenient to operate.
本装置由人力操作手轮，通过锥形齿轮等减速传动，直接驱动阀门阀杆上下移动，启闭阀门。
The device by the human operator launches, such as through the cone-shaped gear reducer drive, direct drive valve stem up and down movement of the valve gate.
在大多数的使用情况下，四杆曲线同源机构与原始机构具有相同的传动角。
In many cases, transmission angles of cognate mechanism and original mechanism are identical.
变速箱采用常啮斜齿轮传动，结合套换档、双杆机械操纵，前进五档、后退四档。
Transmission : normally meshed helical gear drive, coupling sleeve shift and two lever operation. The transmission has five forward speeds and four backward speeds .
介绍了一种基于杠杆-铰杆增力机构的液压-机械复合传动装置的工作原理，给出了其力学计算公式。
The working principle of a kind of hydraulic-mechanical combination driving device based on lever-toggle force-amplifier was introduced in the article, its force calculation formulas are given also.
该项工艺省去原机械举升中的油管，利用空心杆作为传动介质和油流通道，下冲程挤压排液。
This technique eliminates the tube in conventional mechanical lifting, takes hollow rod as the transmission medium and oil flow channel and discharges fluid during down stroke.
机器人采用内置电动机及传动机构的全主动轮杆式结构，包括六只驱动臂杆和机架杆。
The robot has link structures of whole active wheels with motor and transmission mechanism built in it, which includes six driving arm links and a body frame.
在一个手动变速器里，当你操纵换挡杆从一个档位到另一个档位时，齿轮沿轴向滑动，使大小不同的齿轮进行啮合从而满足不同的传动比的需要。
In a manual transmission, gears slide along shafts as you move the shift lever from one position to another, engaging various sized gears as required in order to provide the correct gear ratio,.
根据四杆机构的杆长关系，具体给出了最小传动角的准确位置。
According to relationship between the length of the linking rods of the four link mechanism, the paper proposes an accurate location of the minimum transmission Angle.
输送带煤流采样机是以电机为动力，通过减速器及链轮传递驱动力，利用大链轮上的挡杆使偏心轮重心上移的传动系统。
The machine is the transmission system with motor as power that transmits drive through gear reducer, sprockets, and uses the rod on big sprocket that makes the focus of partial ship moving upwardly.
转杆高速旋转时，捏住离合器的提环就可进行与传动系统的脱离操作。
When the rotary rod is rotated at a high speed, the disengaging operation between the clutch and a transmission system by kneading the bail of the clutch.
然后详细的讨论了五杆机构在每一种分类情况下机构中存在双曲柄时机构的传动比及相位角的范围。
Then we conclude the five-bar's classification and the gear ratio and phase Angle in each classification to be full rotatability.
应将丝杆传动系统设计成能够阻止荷载支承装置在正常使用时从系统中分离出来的结构。
The srewdrive mechanism shall be designed to prevent separation of the load supporting device from the mechanism during normal use.
磨盖板机中的盖板传动装置由一个曲柄滑块机构和两个转动导杆机构等组合而成。
The device for driving flat in the flat grinding machine is composed essentially of a slider-crank mechanism and two rotating guide mechanisms.
然后，针对能够整周转动的齿轮—五杆机构，研究了其上的一点在齿轮机构的传动比、初始相位角、杆长以及两杆之间的夹角变化时的轨迹曲线以及速度和加速度曲线的情况。
Then the locus curves of one point in the geared five-bar were studied with the change of the gear ratio, the phase Angle, the bar length and the Angle between two bars.
设计上同时考虑操作杆的贴合及传动轴的支撑，更易于安装。
Designed taking into account the operating lever of the fitting and the shaft support, easier to install.
与仍然留在最终位置的调节杆手柄或传动装置不同，我们的组装可以保证手柄一直自复至原始的位置。
Unlike a standard lever handle or gear operator which will remain in the last position, our assemblies ensure that the handle will always spring return to its original starting position.
与仍然留在最终位置的调节杆手柄或传动装置不同，我们的组装可以保证手柄一直自复至原始的位置。
Unlike a standard lever handle or gear operator which will remain in the last position, our assemblies ensure that the handle will always spring return to its original starting position.
应用推荐