发动机通过一条传动带拖动后轮。
硫化橡胶制的传动带或输送带及带料。
Conveyor or transmission belts or belting, of vulcanized rubber.
还作为传动带驱动压榨部其他组成部分。
If also ACTS as a transmission belt to drive other components of the press section.
利用实验方法研究粘弹性传动带的非线性振动。
The nonlinear vibration of an axially moving viscoelastic belt as typical moving continua was experimentally investigated.
多楔带作为一种新型的传动带，具有许多优点。
Rubber poly v-belt is the new type transmission belt with a lot of ad-vantages.
连续传动器使用传动带、链条或者滚动接触体。
Stepless transmissions usebelts, chains, or rolling-contact bodies.
消防员花了两个小时才把传动带切断，把他救了出来。
It took firemen two hours to cut through the drive belt to free him.
打开无级变速传动带罩板检查，发现传动带打滑严重。
Open Continuously Variable Transmission with plate check and found that serious belt slipping.
它由一个马达、一个咖啡罐以及一个连接的传动带构成。
It was a motor and a coffee can and a little band between them.
通过改变驱动轮与从动轮传动带的接触半径进行变速。
Through changes the driving gear and the driven wheel transmission belt's contact radius carries on the speed change.
而列维梯在这方面只需要一个环形传动带，成本低廉而且便于维修。
The Levytator, on the other hand, has one single loop, making it a cheaper proposition because fewer steps are required.
广州市汉泰橡胶制品公司专业从事各种橡胶传动带的开发、生产和经营。
Guangzhou City Han Thai rubber products company specializing in all kinds of rubber belt development, production and management.
发动机带动小带轮转动，通过皮带传动带动磨头旋转，对钢轨产生打磨作用；
Engine drives the pulley to rotate, and the grinding head is driven to rotate by the driving belt to grinding the rail;
并根据传动带的定长、打滑及厚度作了修正，从而提高了锥形轮曲线的精确度。
The cone radii are revised in response to length, creep and thickness of the belt, thereby increasing precision of cone drum curve.
对V带测量项目、测量方法作了介绍并对传动带测长机结构及工作原理作了阐述。
Describe the V belt measuring project and measuring method, privides the structure of the transmission belt length measuring unit and operation principle.
采用中心传动带间隙调节系统的三分仓回转式空气预热器对原空气预热器进行更换。
A center-driven tri-sector air heater with a clearance adjuster was adopted to replace the original air preheater.
分析了风扇传动带盘的工艺特性和工序，设计了模具结构，论述了其特点和工作原理。
The technologic property and working procedure of the driver of the automobile fan are analyzed, and the structure, character and working principle of the mold are described.
不仅如此，传统的这一上一下的电梯需要两个单独的环形传动带，造价高达10万英镑。
Furthermore, the "up" and "down" escalators require two separate loops, each costing around E100,000 each.
我公司成立于1956年，有20多年生产传动带、输送带的历史，积累了丰富的生产经验。
I was founded in 1956, 20 years of production belts, the conveyor belt of history, has accumulated rich experience in production.
对于长期停放的汽车，更要定期对其上的橡胶制品，如轮胎、传动带以及密封条等经常检查。
For a long time, the more to their cars to its regular rubber products, such as tyre, belts and seal that often check article.
采用极完美且能保持热度在一定程度的铁氟龙传动带，而其清洁布杆可随时保持皮带之清洁。
Using a perfect and can keep the heat in a certain degree of teflon belt, and the clean cloth stem can keep the belt clean.
采用磁电式转速传感器对发动机转速、CVT输入和输出转速及传动带的位置即传动比的测试。
Magnetoelectricity rev transducer is chosen to test the rotate speed of the engine, of the input and output of CVT and to test the position of the transmission belt.
同步带是一种集链传动、带传动、齿轮传动的优点于一身的传动带，包覆布是保护其齿部和骨架线绳的材料。
Synchronous belt is a kind of special belt which possesses the merits of gear, chain and belt transmissions. The material is protect the teeth and the skeleton material.
制造颜料，烘干需要的热量，照明，电力，传动带，电动机，一家工厂所需要的一切设备，等等，所有这一切需要多少技能？
How many skills went into the making of the tint and the kilns, into supplying the heat, the light and power, the belts, motors, and all the other things a mill requires?
纺织材料制的传动带或输送带及带料，不论是否用塑料浸渍、涂布、包覆或压层，也不论是否用金属或其他材料加强。
Transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material.
哈金森全球生产产品范围包括军用产品、减震产品、车身密封系统、流体传动系统、传动带、密封件及医用手套和婴儿用品。
Products of Hutchinson Worldwide include military products, anti-vibration systems, body sealing systems, fluid transfer systems, belts, seals, medical gloves and baby products.
这一标准设计是基于一个由固定电机带动的传动带托台自动机械系统，适用于大部分的包装应用，而不需要考虑规划和产品负荷。
The modular design is based on a belt-driven gantry robotic system with fixed motors that can be customized to fit most packaging applications, regardless of layout or product load.
这一标准设计是基于一个由固定电机带动的传动带托台自动机械系统，适用于大部分的包装应用，而不需要考虑规划和产品负荷。
The modular design is based on a belt-driven gantry robotic system with fixed motors that can be customized to fit most packaging applications, regardless of layout or product load.
应用推荐