为进一步优化工艺参数提供了依据。
Tt provided basis for optimization of technological parameter.
这有助于预测加工质量，优化工艺参数。
It helps predicting the level of machining and optimize process parameters.
模拟结果为减少调试和优化工艺参数提供了依据。
Results of simulation can be referrence to reduction of adjustment and optimizing technological …
通过优化工艺参数，保证了纺纱的顺利进行和成纱质量。
Processing parameters are optimized to guarantee smooth spinning and yarn quality.
通过优化工艺参数，提高了合金焊盘条性能和表面质量。
Mechanical property and surface quality of alloyed welding wire rod have been improved on optimizing process parameters.
根据原料优化工艺参数可以减少酯化快循环现象的发生。
The probability of fast circulation can be reduced by optimizing the process parameters according to the raw material.
利用优化工艺参数提取红甘蓝色素时，具有最大的提取产量。
It had maximal extraction yield of RCP with optimized technique parameters.
通过优化工艺参数、机体预热的方法可以提高模具修复质量。
The repairing quality of the dies was achieved by optimum parameter of laser cladding and preheating.
优化工艺参数，通过调整补偿挡板使膜厚均匀性控制在3%以内。
The process flow is optimized through the adjustment of process parameters to get a good thickness uniformity of less than 3% by adjusting the compensation bezel.
从而确定优化工艺参数，以适应市场的需求，提高产品的内在质量。
The optimized technological parameter is determined so as to meet the demands of market and improve the quality of products.
通过优化工艺参数，改进操作条件，降低了分银渣中银的质量分数。
The advices to reduce silver content in silver-extracted sediment by optimizing process parameters and improving operating conditions are put forwarded.
最后优化工艺参数，制备出具有低阈值、高对比度的PDLC薄膜。
Optimize the environment factors to prepare PDLC films with the best quality, low threshold-voltage and high CR(contrast ratio).
通过一系列单因素试验和正交试验确定了苦荞麦饼干的优化工艺参数。
The optimum processing technology parameter was obtained through one factor and orthogonal test.
探讨了合成工艺条件，提出了优化工艺参数，研究了加氢还原新工艺。
The reaction conditions for the synthesis were studied. The optimum parameters were given. The new technology for the hydrogenize reduction was researched.
其次，研究超声波辅热处理对毛豆仁过氧化物酶钝化机理并优化工艺参数。
Secondly, the mechanism of edamame peroxidase inactivation caused by thermosonication was studied.
通过试验分析了烟秆纤维的特征，开发了烟秆无胶纤维板制备工艺并得出优化工艺参数。
Though a serious tests, characters of tobacco-stem fiber are studied, process for preparing tobacco-stem binderless fiberboard is developed and optimum process parameters are obtained.
在进一步优化工艺参数后，可以成为有效的脱硫手段，降低品种钢在冶炼过程的生产成本。
As an effective measure of desulphurization this process can reduce the production cost of high grade steel by way of further optimization of the process parameters.
连铸坯与结晶器间摩擦力是反映铸坯表面质量、优化工艺参数和进行拉漏预报的有效参数。
The friction between billet and mold is an effective parameter reflecting billet surface quality, optimizing technologic parameters and predicting breaking out.
该技术对揭示铸坯感应加热过程的规律、优化工艺参数、推动技术进步具有重要的应用价值。
This technology has important value to discover the rule of induction heating process, optimize process parameters and drive technology progress.
以白桦枝桠材为原料，在测定材质的基础上对制板工艺进行研究，提出了制板的优化工艺参数。
In this paper, the properties of both White Birch branch material and the board have been investigated.
因此研究钛合金材料的切削性能，优化工艺参数对于提高加工效率、控制加工质量具有重要意义。
Therefore, investigation on cutting mechanism of titanium alloy and optimizing the cutting parameters are essential to increase machining efficiency and to control the cutting process.
同时分析了高强钢焊缝质量常见缺陷，并给出了一套可以有效控制焊接高强钢加工质量的优化工艺参数。
And analyzing common quality defects of high strength steel welding line. A series of process parameters which can effectively control thew...
本文针对连铸提高拉速后，如何改善工艺操作，优化工艺参数，提高或解决因拉速提高后引起的铸坯质量问题。
Some measures are suggested to improve operation, optimize technological parameters for solving some strand quality problems caused by increased casting speed.
计算机模拟技术的应用，为合理设计快速树脂模具结构，定性定量地优化工艺参数，从而控制和改善制品质量提供了有效方法。
The results also show that computer simulation technology provides a useful tool for improving effectively the quality of products made by rapid tooling. The simulation results can…
通过用AB活性污泥法对处理豆制品废水工艺的试验研究，确定了优化工艺参数，包括溶解氧、 污泥负荷、曝气历时，并在选定的工艺条件下对豆制品废水进行了试验。
Treatment process of bean products wastewater with AB activated sludge has been studied. Through experiment, the optimum parameters, including DO, sludge load and time of aeration were determined.
优化与设定新的与现有的自动化工艺，参与优化生产线布局和工艺参数，提高生产效率和产品质量。
Optimization and setting of new and existing automotive processes, Involved in the optimization of the production line layout and process parameters, improve production efficiency and product quality.
与之配套的自动控制设备不仅能够优化工艺运行参数，而且配有远程监控功能，方便运行与管理。
The automatic control equipment equipped on it can not only optimize technological operation data but also match with remote monitor and control function to facilitate operation and management.
与之配套的自动控制设备不仅能够优化工艺运行参数，而且配有远程监控功能，方便运行与管理。
The automatic control equipment equipped on it can not only optimize technological operation data but also match with remote monitor and control function to facilitate operation and management.
应用推荐