因此，建筑的布局和规模都设计成优化的模块核心尺寸。
Thus, the building layout and dimensions were designed to optimize modular core sizes.
为了优化塔架的结构参数，采用正交设计对其结构尺寸进行了优化。
In order to optimize the structure parameters of the tower, the orthogonal design method is used.
通过对离子注入机离子源灯丝绝缘子的结构、尺寸、实际工作效果等方面的分析，提出了一种注入机离子源灯丝绝缘子的优化设计。
Based on the analysis of the structure, size, and actual work efficiency of an ion source filament insulator in ion implantation system, an optimization design of the filament insulator is presented.
这表明，用这一方法可对凝固晶粒尺寸进行控制和预测，为优化实验设计提供了简便实用的手段，具有较大的实用价值。
This method may be used to control and predict the solidified grain size, provide a concise means for optimizing experimental design, and be of big practical value.
其优化模型包含两类设计变量：几何位置变量和几何尺寸变量。
The optimization model contains two kinds of designing variables: geometric position variable and geometric dimension variable.
航空煤油发动机的尺寸经过优化设计，已经能够在发动机的最有效的操作点上提供巡航动力，进而从总体上提高燃料效率。
Thepetrol engine is optimally sized to provide the cruise power at its most efficient operating point, resulting in an improved fuel efficiency overall.
采用水力计算方法对中空纤维膜组件进行优化设计，发现膜的几何尺寸对产水量的影响很大。
In optimization design for hollow fiber membrane module by using hydraulic calculation, it was found that the geometric dimension has great effect on water yield.
通过对加工工艺的控制，对成型模具流道的合理设计，对加工装备结构尺寸的优化，可以实现高效分散的拉伸流场。
Through controlling the processing technique, reasonable designing for molding runner, optimizing the equipment construction and dimension, it could get the high effective elongation flow field.
具体尺寸用优化设计方法计算得到。
电机的系列优化设计要将若干台具有某些相同尺寸的电机作为一个整体来考虑。
For optimum design of a motor series some motors of same size must be considered as a whole.
在优化设计中，用正交法分析了结构形式和构件变化对应力变化的影响，得出了合理的结构形式和构件尺寸。
In the optimum design, effects of variety of structure type and structural components on stress are analysed, so that reasonable structure type and component dimensions may be obtained.
利用此方法对多级降压消声器的结构尺寸进行优化设计。
This method is applied to designing the structure size of Multi Stage Decompression Muffler.
建立了两片式铝罐尺寸设计的优化模型，讨论了模型的两种次优解。
The size design of optimal model for two pieces Aluminium Can has been established, two kinds of suboptimal solution about the model has been discussed.
高频开关电源功率变压器线圈优化设计技术能有效减小变压器损耗以及尺寸，提高开关电源功率密度。
Optimal design for the windings of high frequency power transformer in SNIPS can reduce greatly the windings loss to improve SNIPS power density.
计算结果表明，在最苛刻的加载方式下，轨姿控舱体的强度可以满足设计要求；壁厚尺寸是关键的优化设计变量。
The analysis result shows that the section can work reliably and the wall thickness is the key design variable.
采用蚁群算法对食品机械四杆机构进行最优化设计，分析建立杆尺寸间的几何联系，并结合具体实例确定四杆机构各个参数。
The ant colony algorithm was used to carry on optimization design of four-bar mechanism for food machinery, analyzing and building the geometric relation between the linkage.
高频开关电源功率变压器线圈优化设计技术能有效减小变压器损耗以及尺寸，提高开关电源功率密度。
The loss model can be easily used in optimal design for the windings excited by switch-mode current, especially for the litz wire windings.
以某棒材粗轧机组力矩均衡分配为目标，对各孔型尺寸进行了优化设计。
Aimed at a uniform distribution of driving torques, an optimization design of pass parameters is carried out for primary bar rolling mills.
基于稳健设计和稳健优化设计原理，提出了平面尺寸链稳健性基本概念。
In this paper the basic concepts of the robustness of plane dimension chain is put forward on the basis of engineering robust design principle.
通过对铝合金扁铸锭外形尺寸实测数据的分析，提出了一种半连续铸造结晶器内腔形状的优化设计方案。
An optimization design of the crystallizer internal shape for semi-continuous casting was proposed according to the outside dimension data of the flat ingots.
根据气压膝关节机构优化后的结构尺寸，对气压膝关节进行结构设计，并对气压控制元件依据规范进行合适的选用。
This paper designs the structure of the pneumatic knee-mechanism according to the optimized size and picks out the optimum pneumatic control unit based upon the criterion.
某型机翼内翼结构布局优化模型，包括两类设计变量：位置变量和尺寸变量。
A certain structure optimization design model that contains both position variables and size variables were given in this paper.
提出了一种渐进优化方法，通过分离设计变量，分别采用渐进节点移动法和满应力法优化桁架结构的形状和尺寸。
In this paper, an evolutionary optimization method is proposed to minimaze the weight of truss structure in terms of nodal coordinates and element cross sectional areas.
在分析原有的真空箱机械强度的基础上，使用有限元方法对真空箱进行优化设计，进一步降低了产品的重量，并获得了最小壁厚尺寸，在实际应用中达到了满意的效果。
The weight of the box is optimized using FEA method, based on the mechanical strength analysis of the old one, and the minimum wall thicknesses are obtained, and are used sounded in practice.
为了获得最佳的内筋成形质量，有必要对旋轮的形状和尺寸参数进行优化设计。
In order to improve the forming quality of inner ribs, it is necessary to optimize the roller parameters.
通过对目前常用的钢箱梁桥结构尺寸设计中的控制因素的分析，找出了钢箱梁尺寸设计中的主要影响因素，得到此类桥梁的尺寸优化设计原则。
The control factors are analyzed when a steel box beam is designed. The main influence factors and the optimum principles in designing a steel box beam are put forward.
以装载过程中动载荷最小为目标函数，对耙爪机构的主要结构尺寸和运动参数进行了优化设计。
With minimum dynamic loads of a raking mechanism during loading as the objective function, main structural sizes and kinematic parameters are optimally designed in the paper.
本文以尺寸链理论为基础，通过对二阶矩可靠性指标的应用到装配尺寸链的研究，建立计算机辅助公差优化设计的尺寸模型。
Thus a kind of computer aided optimum tolerance design model is built, by the reliability index of second moment based on the Dimension chain theory.
从热传导原理、肋片的温度分布特性等，与现代优化设计理论相结合，导出了一种关于等厚度环肋的尺寸优化的方法。
Combined with modern optimization theory, a method of size optimization for annular fins with constant thickness is derived from theory of heat conduction and temperature distribution in fins.
通过优化设计与分析发现适当降低波导芯层的尺寸可以弥补因包层调制引起的调制效率的下降。
Also, optimizing design and analysis showed that the decrease of modulation efficiency due to modulating in claddings can be compensated by appropriately reducing the size of cores.
应用推荐