本文在分析抑制谐波常用方法的基础上，利用瞬时无功功率理论进行有源滤波器的仿真设计。
Based on analyzing the common way of harmonic restraint, this paper makes use of the theory of instantaneous reactive power to simulate and design active power filter.
从仿真设计原理、仿真控制机制、模型内部结构和模型算法三方面研究防空火力抗击效果的仿真模型。
The simulation model of air defense fire oppugning effect was based on simulation design theory, simulation control mechanism, model internal structure and model algorithm.
介绍在仿真变电站断路器控制回路仿真设计中，如何利用双位置继电器解决断路器机构触点仿真设计的问题。
It is described in this paper that how to use two-position relay to solve simulation design of contact of CB in control circuit of simulation substation.
针对数字电路多媒体教学的特点，探讨了电子电路仿真设计软件EWB在数字电路多媒体课件设计中的应用。
This paper analyzes the characteristic of "Digital Circuit" course, and discusses the application of electronic emulation software EWB in designing of "Digital Circuit" multimedia courseware.
在完成过程中，充分考虑了铺设轮的机械设计要求，采用了计算机辅助仿真设计、有限元分析和试验校验的方法。
In the process of completing, the mechanism design requests are considered fully, some methods such as the computer assistant simulation design, finite element analysis and test verify are adopted.
通过计算机仿真设计和优化，提出了扳手生产的新的锻造加工工艺，该新工艺用楔横轧精确制坯实现了优化目标。
A new forging technology is proposed, in which computer simulative design and computer optimization are applied to exact preforge through transverse rolling.
以某型天线稳定平台为例，阐述了产品从初始载荷仿真分析到整体模型结构分析的基于虚拟样机仿真设计的方法。
Based on a design example of antenna stabilized platform, product design method of the virtual prototyping-based simulating design from load analysis to whole model structure analysis was explained.
EWB是目前广泛应用的电子仿真设计的工具，如果在电子仿真实验课中灵活应用其它多媒体软件，其效果会很理想。
EWB is a famous tool of wide use in design of electronic imitate experiment today. The effect is very good if it's used companied with other multimedia software.
介绍了钢管管缝检测原理，对管缝检测信号进行了分析模拟，对信号处理电路的计算机仿真设计及参数选择进行了较详细探讨。
Steel pipe flaw testing principium is briefly described, pipe flaw testing signal is analyzed, the design and simulation of signal processing circuit are discussed in detail.
本文着重介绍采用MATLAB软件对有限冲激响应滤波器进行仿真设计，从而简化了设计中繁杂的计算，并提高了滤波器的滤波性能。
This paper introduces the design that finite impulse response filter is simulated by MATLAB to simplify the complicated computation in simulation and to improve the performance of filter.
阐述了一种可以承受大功率传输的功率分配器的设计理论和关键技术的方法，并且举例实现了该功分器用微波软件HFSS的仿真设计。
This paper describes the design theory and key technique's method of power splitter which can transmit highpower wave, and simulated design by HFSS software.
实验仿真设计了两种典型的递归式MTI滤波器，结果证明该方法是一种有效的设计方法，它可以灵活而快速地设计出所需要的滤波器。
Two kinds of classical recursive MTI filters are designed in this paper. The results demonstrate the validity of this design method that can design flexibly and quickly a required filter.
理论分析、仿真设计和实验结果吻合得很好，能够相互印证，验证了这种新型的谐振型耦合结构的可行性，展现了其优良的特性和应用价值。
Theoretical analysis, simulation and tested results agree well with each other, validating the feasibility of the resonant coupling structure and demonstrating its superior features and value.
为了验证本文所做的工作，文中给出了多个滤波器设计实例，并且运用电磁仿真软件进行仿真设计，较好的仿真结果证明了文中方法的有效性。
In order to verify the work in this dissertation, some design examples are given and simulated with some electromagnetic softwares. Good simulation results state the validity of these methods.
本文给出了一种利用PID加输出反馈来任意配置闭环系统极点和零点的简单实用的电液伺服系统设计方法，仿真设计实例表明了该方法的有效性。
This paper gives out a simple and practical method of designing electrohydraulic servo system by using PID plus output feedback to make arbitrary configuration of pole-zero in closed-loop system.
分布式潜艇作战系统仿真设计环境是目前国内功能较全、规模较大、技术较新的潜艇作战系统仿真平台，是数学仿真环境和半实物仿真环境的综合集成。
The distributed simulation designing environment of submarine combat system is a type of advanced simulation platform with full function, large size and new technology applied.
在新的开发过程中，整个仿真设备和指令操作站(IOS)的设计经过了改善，满足人类环境改造学的要求。
In the course of these new developments the design of the entire simulator equipment and the Instructor Operating Station (IOS) have been improved and adapted to ergonomic requirements.
该产品的典型应用包括民用与军用仿真和训练、任务规划、科学与医学可视装置、建筑设计以及能源探勘。
Typical applications include civil and military simulation and training, mission planning, scientific and medical visualization, architectural design, and energy exploration.
之所以Aptera这样的公司出现，就是因为新车型的设计已经很大程度上变成了计算机仿真技术的运用，而不只是依赖于金属(或者是碳纤维)。
One reason for the emergence of firms such as Aptera is that designing a new vehicle has become as much an exercise in software simulation as in metal (or even carbon-fibre) bashing.
由于店主在模仿真苹果门店的店面设计和氛围上做得足以以假乱真，此事在国际上获得了广泛关注。
It has since gotten widespread international attention for the remarkable lengths to which its proprietors seem to have gone to mimic the look and feel of a real Apple Store.
在纸板加工生产线中，存在着切纸机设备落后、自动化程度低的现状，为此基于气控原理和仿真技术设计一种新型切纸机。
Paper cutter machine is backward with low degree of automation in paperboard processing, so new paper cutter machine has been designed based on pneumatic principle and simulation technique.
计算机应用领域包括科学计算、数据处理和信息管理、自动控制、辅助设计制造和测试、系统仿真。
Computer applications including scientific computing, data processing and information management, automatic control, computer-aided design manufacturing and testing, the system simulation.
最后，基于FPGA技术实现了系统提出的各种功能，并进行了仿真，验证了其设计的合理性和正确性。
In the end, all the proposed functions are realized based upon FPGA technique and the rationality and validity of the design is tested through simulation.
第四步，介绍了培训仿真流程系统模型和数据库设计、培训仿真流程实现算法、柔性培训仿真流程原型的设计以及系统的设计。
Fourthly, I will introduce the system model, design of database, arithmetic of training emulation flow, and the design of gentle training emulation process model and the system.
详细阐述了工作流建模和仿真工具的需求分析、设计和实现；重点讨论了工作流模型检测和仿真分析。
This paper expatiates on requirement analysis, design and implementation of workflow modeling and simulation tool, and mainly discusses workflow model check and simulation analysis.
本文介绍一种采集微弱光电信号的方法，通过电路设计、系统仿真，实现了系统验证。
Presents a novel method to acquire weak signals and realizes the system after circuit design and system emulation, which is aimed to detect weak photoelectric signals.
为了达到最好的结果尽可能利用所有可用的资源，如公司的规范和标准，遵守设计规则，并使用可用的设计仿真工具和原型。
In order to achieve best results he makes use of all available resources such as company norms and standards, abides to design rules and makes use of available design simulation tools and prototypes.
给出了设计可靠性的建模方法和用数字仿真评估设计可靠性的模型方法和仿真过程并给出了一个典型电路的仿真实例。
The model and method for estimating circuit design reliability by using digital simulation are established. A simulation example of the typical fuze circuit is given in this paper.
给出了设计可靠性的建模方法和用数字仿真评估设计可靠性的模型方法和仿真过程并给出了一个典型电路的仿真实例。
The model and method for estimating circuit design reliability by using digital simulation are established. A simulation example of the typical fuze circuit is given in this paper.
应用推荐