在文档为SIMH系统编写仿真器,您可以了解有关仿真器体系结构以及各种仿真计算机的一些详细信息。
In the document Writing a simulator for the SIMH System, you can learn more about the simulator architecture as well as some of the details of the various simulated machines.
该控制器具有结构简单、响应快、鲁棒性强等优点,仿真表明这种控制器能有效改善该类系统的控制品质。
Simulation shows that with advantages of simple structure, quick response, and robustness, the controller can effectively improve the control of the system.
论文论述了每一种算法结构的原理,从理论分析和计算机仿真两方面对算法性能进行了研究。
Principles of each blind estimation structure are presented in this thesis and the algorithm performance is studied by both theoretical analysis and computer simulation.
介绍分布式作战仿真系统的开发,重点提出了基于HLA技术的系统体系结构,分析在创建系统时的关键技术。
The paper introduces the exploitation of the distributing campaign simulation system, emphases to advance the system structure on HLA, analyses the key technologies.
仿真结果表明:开关磁阻电机的智能滑模变结构控制方法简单,有良好的动态性能,较好的鲁棒性。
The simulation results show that the method of intelligent sliding mode Variable Structure Control is simple, with good dynamic performance and robust property.
计算机仿真结果表明,采用模糊变结构附加励磁控制方法可以提高鲁棒性、解决高频抖动问题,并能够很好地改善电力系统的小干扰稳定性。
Computer simulation shows that the control of fuzzy variable structure can increase the robustness, solve the problem of shiver at high frequency, and improve the stability of small disturbance.
仿真及实验结果表明,本系统硬件简单、实时性好,系统结构紧凑,具有良好的动态和静态特性。
The result from simulation and experiment show that this system possess advantages of simple hardware, good real-time, system construction compact with good dynamic and static characteristic.
磁盘驱动器的设计者可以利用ANSYSFSI进行双向耦合流体结构仿真,该软件具备在单一的模拟环境下优化设备的能力。
Disk drive designers use ANSYS FSI solutions to conduct two-way coupled fluid-structure simulation, which provides the ability to optimize devices in a single simulation environment.
仿真结果表明,滑模变结构控制的性能优于常规的PID控制,在系统参数变化时表现出更强的鲁棒性。
Simulation results show that the controller is better in comparison with traditional PID controller, and it has stronger robustness for the change of system parameters.
建立了基于组件技术的模型规范和软件体系结构,实现组合式的仿真应用构建模式。
Component software technology based on model specification and software architecture is established, which realized simulation system constructing mode of composing.
给出了该仿真系统的组成、信号处理流程,以及包括弹体动力学、敏感元件和变结构控制器的仿真模型。
The composition of the simulation system, data processing flowchart and simulation mode that included the missile dynamics, sensitive element and variable structure controller were given.
有限元分析方法通过应用微观结构演变的编码实现了预测、仿真锻造过程中晶粒的演变过程。
The microstructure evolution models were implemented into the finite-element code, which allowed the prediction of distributions of grain size in the volume of the forging.
神经网络学习模块采用BP网络,通过仿真分析确定了网络的结构。
The NN learning block, using BP network, is determined by comparing the simulation results.
本论文的主要工作即着重于系统芯片中片上总线结构的性能评价研究,包括总线结构的建模、系统仿真环境的建立以及性能评价的方法。
This paper focuses on performance estimation of the embedded microprocessor based on the on-chip bus, including on-chip bus modeling, high-level simulation environment building and their combination.
本文介绍了针阀式缓冲气缸和溢流式缓冲气缸的结构及工作原理。通过仿真计算比较了它们的缓冲特性和吸收冲击的能力。
The structure and principle of needle valve cushion and relief valve cushion were introduced. Cushion performance and capacity of absorbing impact were compared by simulation.
针对一类含橡胶减振垫燃油泵托架出现疲劳断裂的现象,研究利用数值仿真技术预测结构疲劳寿命的方法。
Using numerical simulation technology, we study a method for predicting the structural fatigue life of a fuel pump bracket(FPB) that contains rubber cushion for vibration reduction.
高层体系结构(HLA)作为新一代分布交互仿真的体系结构,在作战模拟与仿真方面有着广阔的应用前景。
High level architecture (HLA), which is a new architecture for distributed simulation, has found a wide application in military simulation and war-gaming.
运用计算流体力学技术对高速公路清扫车吸尘系统的流场进行了仿真分析与结构改进。
Simulation analyses and structure optimizations in the design of dust suction systems of highway sweepers have been completed by using computational dynamic fluid (CFD) technology.
论述了模拟仿真器与数字实时仿真系统各自的特点及数模混合实时仿真系统的结构和应用情况。
With the analysis for the characteristics of analogue simulator and digital real-time simulator, the principle and application of hybrid real-time simulators are presented.
通过仿真技术,便于把握结构在地震作用下的动力响应过程,发现其规律,深化结构分析设计研究。
Passing to the simulative technique, the dynamical process of construction under the earthquake is easy to holds, discovering construction regulation, deepen structural analysis and design.
着重介绍了该仿真系统的总体结构与功能设计,软件编程与调试。
The overall structure, function design, program composition and debugging of the simulation system are emphatically introduced in the paper.
OPNET网络仿真软件为网络和分布式系统仿真提供了功能强大的开发环境,HLA体系结构为不同的仿真实体提供了协同仿真的平台。
OPNET provides a comprehensive development environment supporting the modeling of networks and distributed systems, and HLA provides a Co-simulation platform for different simulation entities.
本文对水下航行器制导控制半实物仿真系统的结构和功能作了详细介绍,并以此半实物仿真系统为试验平台,通过试验对实时调度算法进行应用和验证。
This paper introduces the frame and function of underwater vehicle control and guidance hardware-in-the-loop simulation system in detail, which actor as the test flat, through.
结果表明,该仿真系统结构合理可靠,各子系统采用的数学模型和仿真算法正确可信。
The results show that the architecture of the system is reasonable and reliable, and the mathematics model and simulation algorithm of the sub-systems are also valid and practicable.
其次重点研究了移动传播环境的频率选择性信道的建摸方法,并给出了模型的硬件实现结构和仿真结果。
Then it introduces the modeling method of frequency selection channel in mobile transmission environment. It also gives the model hardware implementation architecture and simulation results.
其次重点研究了移动传播环境的频率选择性信道的建摸方法,并给出了模型的硬件实现结构和仿真结果。
Then it introduces the modeling method of frequency selection channel in mobile transmission environment. It also gives the model hardware implementation architecture and simulation results.
应用推荐