在研究中，他们开始了全面应用故障仿真系统进行试验，并自编软件对大量仿真数据进行统计分析。
In their research they started to apply the fault simulation system for test in an all-round way and created their own software to analyze the enormous simulation data.
最后，以面向对象的思想处理MEMS仿真数据，建立了便于管理和操作的数据结构模型；
So the whole display system, which built with an ordered data structure model by processing the data from MEMS technical simulation with Object Oriented Programming(OOP), is presented.
大大节约了仿真和分析过程的工作量，仿真数据和结果对卷封机构的设计和校验具有指导作用。
By means of Cosmosmotion, the workload of simulation and analysis was reduced greatly. The simulation results are useful for directing design and check of seaming mechanism.
仿真类根据系统状态来控制完成数据的交换，在获得系统仿真数据的同时获得直观的可视化结果。
Simulation class completes data exchanges according to system state controlling information so as to get simulation system data and video frequency at the same time.
分析了基于HLA的仿真系统中记录与回放结构，研究了联邦执行时仿真数据的记录范围和方法。
The architectures of data logging and replay in HLA-based simulation system were analyzed. The scope and methods of simulation data logging during federation execution were researched.
最后通过仿真数据和实际双通道数据的通道对消结果，证明改进后的算法可有效提高杂波抑制性能。
Lastly, we compare channel-cancellation result of simulated date and real dual-channel echo data, The results proved this improved CSI method is reliable and effectual.
最后利用实时仿真数据库和一些仿真功能，将上述各个类与仿真界面有效的结合，完成仿真软件的制作。
Finally, through the real time simulation database and some simulation functions, connect the simulation interfaces effectively with those computing classes to complete the simulation software.
在大量仿真数据以及当前集成电路设计工艺的基础上，提出了一种简单互连线负载的有效电容计算模型。
A simple and efficient model was presented for computing the effective capacitance of interconnect load based on simulation and integrated circuit process.
映射前后BS PM仿真数据的可视化结果表明，LF X虚拟心脏模型具有更为直观有效的仿真特性。
According to the visualization results of the BSPM simulation data before and after mapping, the LFX virtual cardiac model is characterized by more realistic and effective simulation.
利用装备战损模拟平台收集了大量的装备战损仿真数据，据此建立了各因素对于杀伤效果的一元回归方程；
A great deal of damage simulation data are collected based on the simulation platform and the unitary regression equation of damage effect for each factor is built.
应用不同规格钻杆的仿真数据，建立不同规格钻杆的不同开路磁化曲线，并以此作为最佳磁化强度的选择依据。
Unclosed magnetic curve is be build by simulation data of different specification drill pipe, which be used a rule to select optimum magnetization region.
本文首先阐述了该算法的原理和步骤，然后用仿真数据对这种算法进行了仿真，分析其各个参数对算法的影响。
In this paper, we describe the principles and steps of the algorithm, and simulate the algorithm with some simulation signals to analysis the impact of various parameters on the algorithm.
仿真想定是在利用现代计算机技术对军事系统进行仿真时，可以直接加载到仿真运行单元的关于想定的仿真数据。
Simulation scenario is simulation data about scenario which can be loaded to simulation units, while making a military system simulation with computer technology.
仿真数据显示测量误差在0.15%以内，证明了该焦距测量系统对大口径长焦距反射镜焦距有很高的测量精度。
At last, emulated data shows that the measurement error is below 0.15%, the data obtained by emulation shows the high precision of this measurement instrumentation.
并且将本模型嵌入到现有仿真平台进行仿真试验，得到一系列的仿真数据，用以检验模型的精确度和动态响应特性。
Finally, the dynamic mathematic model has been put into the simulation-testing platform to test the static simulation precision and dynamic response specific characteristic of the model.
在协同仿真中，需要对模型对象和仿真数据进行统一地组织和管理，需要模型库管理系统对建模和仿真过程提供支持。
In collaborative simulation, we need organize and manage model object and simulation data, and need model base to support modeling and simulation process.
通过对大量弹道仿真数据的分析，提出了基于弹道速度最小点的弹道辩识快速算法，并从理论上证明了该算法的正确性。
This paper brings forward a speedy method for trajectory recognition based on the minimum of trajectory velocity by analyzing a great deal of datum, and proves its correctness abstractly.
通过所获得的卫星仿真数据，文中用最小二乘法与选星法对用户进行了定位验证比较，结果表明该卫星仿真器是可用的。
Using the method of Least Squares and the method of Selected Stars, the users Position and Velocity was got through the data acquiring from the simulator.
用基于奇异值分解技术的消噪方法对汽车操纵稳定性试验方法转向轻便性试验数据进行消噪处理。通过仿真数据说明了该方法的有效性。
Based on singular value decomposition technique, the denoising of signals obtained in vehicle handling and stability testing is carried out. The results show the effectiveness of the method.
对所得仿真数据利用求和取平均的方法去除摄动力产生的短周期效应，通过分析去短周期项后的数据揭示出逆行地球同步轨道的演变特点。
Numerical solutions are periodically summed and averaged to get rid of short-periodic-term effects. By analyzing polished data, its orbit characteristics are revealed to us.
文章总结了使用PS ASP进行励磁系统参数仿真的步骤，并给出试验数据与仿真数据的对比结果，结果验证了上述方法的正确性和实用性。
The steps of excitation system modeling by using PSASP were presented. Test data were compared with simulated data and the results indicate that the modeling method were correct and practical.
并通过仿真数据和实际直流系统故障录波数据验证了基于遗传算法的测距方法和数据对时方法具有良好的效果，完全符合现场对测距精度的要求。
Simulation and site fault recording date test results have shown the effectiveness of these algorithms and that they were in accord with the accuracy requirements of fault location in site.
介绍了三相异步电动机的直轴和交轴模型的建立方法，并利用MATLAB语言对两种模型进行仿真，仿真数据包括定子电流、电磁转矩以及转速。
Introduces a constituting method for A-axis and D-axis models of three-phase asynchronous motor. Simulating for those two models by MATLAB language.
但海试数据时间反转镜处理的定位精度远不如仿真数据处理结果，这就提出了时间反转镜被动定位新的研究内容，即信道建模的正确性和算法的宽容性研究。
But, it shows that the localization precision of sea-test data is much lower than that of simulation data, so that it puts forwards the new TRM algorithm which is more tolerant and more robust.
本文对这四种卫星移动信道进行了仿真运算，并将仿真数值与实测数据进行比较，从而验证了这些信道模型及其相关参数的有效性。
Through simulation computation for these four mobile satellite channels, the validity of the simulation model and corresponding parameters put through in the paper has been verified.
本文对这四种卫星移动信道进行了仿真运算，并将仿真数值与实测数据进行比较，从而验证了这些信道模型及其相关参数的有效性。
Through simulation computation for these four mobile satellite channels, the validity of the simulation model and corresponding parameters put through in the paper has been verified.
应用推荐