基于离散事件系统仿真原理，以事件调度法推进仿真时钟，建立这两种发货方式的生产—库存系统的仿真模型。
Based on the discrete system simulation principle and the Event-Scheduling approach, the production-inventory systems under these two delivery ways are modeled.
本文首先叙述了离散事件系统的仿真原理，详细论述了离散事件系统的仿真策略，为单片机系统仿真提供理论基础。
The principle of discrete-system simulation was firstly introduced, and the method of the simulating procedure was discussed in details, which were the foundations of task.
重点描述了仿真原理及仿真模型组成，介绍了雷达信号特性仿真、雷达伺服系统仿真、雷达信号处理系统仿真等关键环节的数学仿真模型。
The simulation principles and the mathematical model is described, and then, the key models of simulations such as signal characteristics, servo systems and signal process system are followed.
当我们写弹簧程序的时候，我们有胡克定律来告诉我们原理，然后我们建立了一个仿真模型，或者说是在这个理论基础上建立了一些工具。
When we did the spring, we had this theory of Hooke's Law that told us something, and we built a simulation, or built some tools around that theory.
在纸板加工生产线中，存在着切纸机设备落后、自动化程度低的现状，为此基于气控原理和仿真技术设计一种新型切纸机。
Paper cutter machine is backward with low degree of automation in paperboard processing, so new paper cutter machine has been designed based on pneumatic principle and simulation technique.
本文对常用的晶闸管计算机仿真模型进行了综述，并较为详细地讨论了各种晶闸管模型的原理、特点以及优缺点。
The paper surveyed the thyristor models which are usually applied to computer simulation of thyristor circuits and discussed in detail the principles, features, advantages and shortages of the models.
论文论述了每一种算法结构的原理，从理论分析和计算机仿真两方面对算法性能进行了研究。
Principles of each blind estimation structure are presented in this thesis and the algorithm performance is studied by both theoretical analysis and computer simulation.
作者提出低频时码信号的正交扫描解调技术，从理论上分析了正交扫描原理和实现方法，并进行了仿真测试；
The orthogonal sampling demodulating technique for low frequency time-code signal is introduced. Based on the theoretical analysis about its principle and implement method, The simulation is tested.
样机试验数据表明提供的压弯机构原理是可行的，压弯机构仿真有限元模型是可信的，这种设计方法是可靠的。
Experimentation data shows that the principle of bending mechanism in this article is feasible, finite element model of bending mechanism is credible and its design method is dependable.
根据无刷直流电机的数学模型和运行原理，通过MATLAB软件的SIMULINK和PS B模块，搭建了电机及整个控制系统的仿真模型。
According to BLDC mathematical model and the movement principle, a simulation model of BLDCM control system by the SIMULINK and PSB block of software MATLAB is built in this paper.
在介绍极化编码及相关检测原理的基础上，利用理想编码信号和实际数据进行了计算机仿真，仿真结果证明了此方法的有效性。
On the basis of the principle of polarization coding and correlative detection, computer simulation is done for the ideal coded signal and real data, the results prove the effectiveness of the method.
给出了半实物仿真系统的基本组成和工作原理，讨论了水下航行器运动的仿真模型和实时积分算法。
The basic organization and simulation principle of the system are presented, and the simulation model for the underwater vehicle and real-time integer algorithm are discussed.
在此基础上，建立了面向对象的动态仿真活动控制原理和事件处理方法，并对仿真建模图形界面进行了研究。
On the basis of this, business process simulation mechanism, activity control method, event-dealing method and graphic interface for modelling and simulation are studied.
最后，为了保证仿真构件的正确性，提出了仿真构件的安全模型和仿真构件的测试层次原理。
At last, in order to guarantee the exactness of simulation component, put forward the security model of simulation component and test level principle of simulation component.
结合冶金过程的一些特点概述数值模拟仿真的基本原理、区域离散化方法、求解技术及应用实例。
The basic principle of numerical simulation, zone discretization method, solution techniques and some application examples are described in light of the characteristics in metallurgical process.
详细叙述了ADAMS软件的多体动力学分析原理，对希望从底层开发自主知识产权虚拟样机仿真软件的人员有一定的参考价值。
Multi-body-dynamics theory about ADAMS software is discussed in detail, which may be helpful to somebody interesting in developing our VP software owned knowledge patent.
本文运用系统仿真的原理结合可靠度理论分别研究了钢筋混凝土桥梁在整体腐蚀和局部腐蚀及裂缝扩展组合效应下使用寿命及其可靠性。
Service-lifetime and reliability is estimated considering two models of uniform corrosion with effect of cracks and local corrosion on the theoretic of system simulation and reliability.
本文介绍了针阀式缓冲气缸和溢流式缓冲气缸的结构及工作原理。通过仿真计算比较了它们的缓冲特性和吸收冲击的能力。
The structure and principle of needle valve cushion and relief valve cushion were introduced. Cushion performance and capacity of absorbing impact were compared by simulation.
仿真试验的结果符合CPL的原理，正确地反映了CPL系统正常运行状态下的动态特性，符合对象的过程机理。
The results of simulation are in of accord with the principles of CPL and correctly reflect the dynamic characters of CPL system in normal running status.
本文提出了绕线式感应电机转子回路电阻的斩波调节原理，设计了双环调速系统，并进行了计算机辅助设计和仿真研究。
This paper presents a chopper adapting principle of rotor's resistance of induction motor, develops a two loops speed governing system, and gives computer simulation results.
文章首先简要介绍了OFDM的基本原理，建立了系统仿真模型，对系统的同步和信道估计进行了分析。
Beginning with brief introduction for the basic principle of OFDM, this paper establishes the system simulation model and thereafter analyzes the synchronization and channel estimation.
通过计算机仿真，研究了相干干扰的原理和可行性，在此基础上研究了各参数对干扰效果的影响。
Through computer simulation, the principle and feasibility of correlative interference were studied. Based on this, the various parameters' influences upon interference effect were studied.
本文概述了系统的主要结构与工作原理，并应用数值仿真和实际工程试验验证考核了系统的有效性。
The paper outlined the main structure and working principle of the system and verified its effectiveness through numerical simulation and engineering tests.
研究了高分辨雷达目标一维距离像的原理及仿真方法并对高分辨雷达一维距离像的姿态敏感性进行了分析。
In the paper, there are: the principle and simulation method of high resolution range profiles is studied, and the pose sensibility of range profiles is investigated.
基于分析的结果，提出了一种新的载波pwm控制方法，并详细讨论了这种方法的原理，仿真及DSP数字实现。
A novel carrier-based PWM method utilizing control freedom degree (CFD) is proposed. The principle, simulation and DSP implementation of the method are discussed in detail.
文章以等精度频率计为例引入单片机和CPLD结合设计电子系统的方法，并给出原理框图和仿真波形。
Tlus paper introduces a way to realize the equal accuracy frequency accounts with MCU and CPLD. and provides with the frame principle of frame as well as simulated wave.
分析其高距离分辨原理及多普勒性能，通过仿真，计算速度、加速度对一维距离高分辨的影响。
The high range resolution principle and Doppler performance is analyzed. The effect of velocity and acceleration on one-dimensional high range resolution is calculated through simulation.
从齿轮传动的基本原理出发，系统地分析了多轴齿轮传动系统的动力学模型原理，提出了基于齿轮副接触算法的动力学仿真模型。
The gear transmission system dynamics model was analyzed according to the gear transmission principles and a dynamics method based on gear contact calculation was given.
详细分析了PPM编码的帧结构，说明了脉冲编号的解码方案以及电路的实现原理，最终给出电路的仿真测试结果。
The paper analyzes frame architecture of PPM code in detail, illustrates pulse-number method and implementation principle of the circuit, and supplies test result of the circuit.
详细分析了PPM编码的帧结构，说明了脉冲编号的解码方案以及电路的实现原理，最终给出电路的仿真测试结果。
The paper analyzes frame architecture of PPM code in detail, illustrates pulse-number method and implementation principle of the circuit, and supplies test result of the circuit.
应用推荐